Ansmann X2 set up for astro
 

Whats everyone using set up wise for asto with the X2? E.g. Tyres and shock oils

Depends on which X2? I run the Monkey with yellow shumacher mini spikes and blue inserts on rear and narrow yellow schumacher mini spike on the fronts. Associated factory shocks with blue springs front and silvers rear with 30wt oil all round. I now also run HPI Blitz front c hubs and axles which make the track 10mm narrower and it was fine. They fitted straight on too which is a bonus.

There's only one X2, it is the rear motor

I run the evo,my setup is
Front 30wt oil,kit springs,pistons,middle hole tower,outer hole wishbone
Rear 25wt oil,kit springs,pistons,middle hole tower,inner hole wishbone
2mm washers under bulkhead ballstuds,alloy wishbone hanger with weight fitted,50g under the servo,100g under the lipo,everything else is as kit.

In the wet,ballistic buggy green spikes rear,schumacher green mini spikes on the front,in the dry i use the AKULA AKX2:thumbsup:

Cheers