New member of the family
 

Well I have got my X6 at last just finished building it last night looks good, first run out this weekend at Bury metro we will see how it goes. I will be running the associated shocks so what oil and springs should I run for Bury or if anybody can post a setup (Chris Dan or Carl).

Oh and what gearing on an LRP 6.5 non sintered cheers.

cant help with the associated setup im afraid but gear it on a 20/81 on a bonded6.5 possibly go up to a 21 but only if you are lacking top end. i ran most of the national season on a 20 and never struggled

Cheers Niggs.:thumbsup:

Red losi pistons all round 35wt front and 30 wt rear and silver springs all round. This was a very good starting setup.

If your not changing to losi pistons.

Then I would run

Front : 30 cwt No2 Blue spring 2 internal spacers.
Rear : 35 cwt No1 Silver spring No internal spacers, but an external to stop the driveshaft hitting the diff outdrive.

What car, 4 gear?

Have you got the BK2 CVD axles? They are a really worth while upgrade!!!!

Danneth, I might be needing some of those :(

G

G, im sure you have the skills to drill the B4 ones 2mm further down the shaft if needed, if not get J to do it.

good skills spenc
pm sent

G, can't help with those I'm afraid other than the part number when I get home. Alternativly if you have pillar drill, do them yourself?

Or maybe a job for Jim? :woot:

G

Quote:

Originally Posted by Northy (Post 119444) Or maybe a job for Jim? :woot:

G jim does all your work on your cars :lol::p

I heard julie has all the setup knowledge though:thumbsup: