oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Xtreme - VEGA (http://www.oople.com/forums/forumdisplay.php?f=15)
-   -   USA TEAM DRIVER REPORT (http://www.oople.com/forums/showthread.php?t=10326)

Mrs.TeamXtreme 27-04-2008 09:43 PM

USA TEAM DRIVER REPORT
 
Hi Guys

I have enclosed a race report that I have received from one of our Team Drivers in the USA. This was at a Trophy Race.


Hi Yanina,

How are you? I just wanted to tell you about trophy race today. I qualified 5th and fin. 5th in the A. The X11 started out a little loose on new tires so I tried worn outs, WOW the car was so much easier drive. the track had a couple of big jumps but a triple that was a nightmare to hit consistently. I choose to double single it. I do not have alot of parts to go all out. It was at least a half a second quicker but if you crashed, you could be done. I still managed to keep pace with them. The car was awesome on the rest of the track. I was behind 3rd and 4th with 2 laps to go when I went for it! ....oops! I piped it. The 3rd place car crashed on the next turn. I would have had 4th with a chance for 3rd if I just waited! ... Oh well. I am still happy about how good the car was. I did not make that many changes. I raised the ride height to 20 mm ft and 24 rear, it seemed to jump better. I also put 2 o rings on the oneway that's it..

Brilliant!:thumbsup:

Tom3012 27-04-2008 09:51 PM

Quote:

Originally Posted by Mrs.TeamXtreme (Post 118400)


The X11 started out a little loose..... I also put 2 o rings on the oneway that's it..


Has he put an X10 driveshaft in it???

.... I raced my pred today, weather was not too good.... 4th round of qualifying i lost control just before the start of the straight ( i hit a bump and slid)... had a head on with a lump of concrete and snapped the chassis in 2...

other than that car was flying!!!

ben 28-04-2008 06:39 AM

Quote:

Originally Posted by Tom3012 (Post 118402)
had a head on with a lump of concrete and snapped the chassis in 2...

This is the 3rd chassis i have seen break now. Tom did it snap on like the cone bit at the front?:thumbdown:

niggs98 28-04-2008 06:56 AM

ben car and concrete never mix well m8, i snapped the back off my xx4 last week at kiddy launching it backwards off the end of the straight when i lost it totally but crashes like that that break a car so badly (no offense tom) are normally a driver break rather than a car weakness, must say that the new developments looked good at epr yesterday especially towards the end of the day on adam and lewis's car, nice to see things being pushed forwards :thumbsup:

Tom3012 28-04-2008 09:53 AM

Quote:

Originally Posted by niggs98 (Post 118434)
ben car and concrete never mix well m8, i snapped the back off my xx4 last week at kiddy launching it backwards off the end of the straight when i lost it totally but crashes like that that break a car so badly (no offense tom) are normally a driver break rather than a car weakness, must say that the new developments looked good at epr yesterday especially towards the end of the day on adam and lewis's car, nice to see things being pushed forwards :thumbsup:


was sort of my fault but there was also a big rut in the grass, and with it being wet, it hit the rut, the back end went away and slipped and there was the concrete.... all happened so quickly, wasnt much i could of done about it really....

and ben. it was at the front yes, close to the front inner pivot block, by the three screws :(....

congrats btw ben, heard you did well yesterday :thumbsup:

niggs98 28-04-2008 10:11 AM

Quote:

Originally Posted by Tom3012 (Post 118477)
was sort of my fault but there was also a big rut in the grass, and with it being wet, it hit the rut, the back end went away and slipped and there was the concrete.... all happened so quickly, wasnt much i could of done about it really....
:

lol as i said no offence ment but just like your discription above just one of those crashes that cant be helped and is very hard on the car, i snapped my xxxcr in a very simlar way at epr early last year :thumbsup:

Tom3012 28-04-2008 11:15 AM

Quote:

Originally Posted by niggs98 (Post 118482)
lol as i said no offence ment but just like your discription above just one of those crashes that cant be helped and is very hard on the car, i snapped my xxxcr in a very simlar way at epr early last year :thumbsup:


none taken:) sucks though doesnt it! the concrete wasnt even scratched :lol:

New Losi 28-04-2008 12:13 PM

So back to Tom's Question, is there an X11 one way now or was the X10 one being used ??

Tom3012 28-04-2008 12:27 PM

Quote:

Originally Posted by New Losi (Post 118512)
So back to Tom's Question, is there an X11 one way now or was the X10 one being used ??

there is an X11 oneway on the way so i believe :thumbsup:... i was just wondering if had opted to put an X10 driveshaft in instead of the X11 shaft?

mro_racing aka Doorbell 28-04-2008 04:08 PM

hay guys there is a oneway diff on the way but i think my x11 is the only one that has a oneway shaft in it that was becouse i sed to team xtreme that the car needs the oneway for the prototype car ive been designin but the one way shaft is just the x11 rear end of the prop and the x10 shaft and front one way

Lee 28-04-2008 04:15 PM

Yardy ran a 1 way in his x11 last summer, i think northy also had one later on in they year:thumbsup:

Mr doorbell, without knocking what you have done with the pred, it is hard to see where you have improved on the design, from the pics it looks like any changes that you have made are not visible to the untrained eye. If you dont want people to know what you have done to the car, why start a thread titled "x11 Prototype". It doesn`t really make sense to me :confused:

turbo_brick 28-04-2008 04:16 PM

I've got a one way shaft for the x11 aswell, as you say it is just the rear part of an x11 shaft and the rest is x10.

Peter

Northy 28-04-2008 04:21 PM

My X11 (sat in the garage looking sad) is equiped with a 1 way prop shaft and a 1 way diff :thumbsup:

G

jimarea51 28-04-2008 07:17 PM

My X11 (sat in the garage looking sad) is equiped with a 1 way prop shaft and a 1 way diff :thumbsup:

G

Hmmm!!! I wonder if it may make an outing, sooner than you think!!!!

I told you he'd be back!!!

JIm

Garry Driffill 28-04-2008 07:32 PM

Interesting

Lee 28-04-2008 07:33 PM

WES got banned for less:lol:

mattym0310 28-04-2008 07:43 PM

Lee what the heck?? lol! what you on about.. sounds a bit random :D

What do you mean about Northy's Pred, is he going to start racing it again??

rcracer 28-04-2008 07:47 PM

cat among the pigeons springs to mind

Tom3012 28-04-2008 07:57 PM

Quote:

Originally Posted by Lee (Post 118622)
Yardy ran a 1 way in his x11 last summer, i think northy also had one later on in they year:thumbsup:

Mr doorbell, without knocking what you have done with the pred, it is hard to see where you have improved on the design, from the pics it looks like any changes that you have made are not visible to the untrained eye. If you dont want people to know what you have done to the car, why start a thread titled "x11 Prototype". It doesn`t really make sense to me :confused:

I agree with Lee on something for once!!!! :thumbsup:

Lee 28-04-2008 07:58 PM

WES said someting similar to jim before and he thread got deleted along with wes:confused:

He is just floating around in cyber space now spouting crap with xgod :woot::lol:


You love me really tom :lol:


All times are GMT. The time now is 08:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com