oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Durango (http://www.oople.com/forums/forumdisplay.php?f=80)
-   -   Dex210 ball cup size (http://www.oople.com/forums/showthread.php?t=102503)

zleader 02-06-2012 11:05 PM

Dex210 ball cup size
 
I have broken 2 ball studs recently. I think they are a little thin walled where the hex driver goes. I was able to salvage a shorter one from my dex410r to finish my day. Lundsford sells m4.8x10mm. I know the 10mm is right; will the m4.8 work with the stock durango ball cups? I have a 22 and tired a ball stud in the durango ball cup.. Did not work. I tried googling for my answer but gave up after awhile..


Thanks

OneKiwi 03-06-2012 06:08 AM

There is a big thread about this as lots of people swapped them out.
Original is 4.7mm

zleader 03-06-2012 04:58 PM

Thanks I was in a bind and looking for a quick fix. I did change my 410r to the Losi ones. I could not find a 10mm local.

Thanks

Shimmy 24-06-2012 06:22 PM

HPI86196 anyone tried these ball studs?

I broke a stock one the other day and thinking of replacing the whole lot.

Cant decide between these or the Losi ones (the Losi ones are 1mm higher correct?).

hotrodchris 24-06-2012 07:03 PM

Schumacher U3497 long ball studs and Losi extra rigid ball cups LOSA6016 are the way to go!

tomvanelsen 24-06-2012 07:33 PM

Lunsford also has them for the 210


All times are GMT. The time now is 02:44 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com