CREAM DEX210 carbon front tower/aluminium mounts
 

IN STOCK..... 17/02/2012

Update to this first post showing the new Cream extreme DEX210 front tower and mount set..

The mounts.. made from high tensile aluminum, designed to keep the ball studs in the original position and plain. Complete with tension bar 'V' and weighing 8.4g for the pair.

http://img.photobucket.com/albums/v4...s/IMG_8131.jpg



The tower, Made from 4mm thick 100% CARBON FIBRE not a cheaper composite material.




http://img.photobucket.com/albums/v4...s/IMG_8135.jpg

Kit comes complete with 4 M3 x 12mm countersunk stainless steel screws.

http://img.photobucket.com/albums/v4...s/IMG_8250.jpg


Cost are as follows....


Pair of aluminium front mounts
4mm thick carbon fibre front tower
4x stainless steel screws.

Priced at £28.00

Shock towers will be available separately at a cost of £13.00.

Postage is as before.

U.K. £2.35 recorded
Europe £8.45 recorded (£2.70 un-recorded @ your risk)
non European countries £8.95 (£3.30 un-recorded @ your risk)

Payment is via PayPal....

Check my feed back, Also please leave feed back.

I bought your B4 mounts, and they are ace. Go for it! :thumbsup:

Noel, you must be a mind reader..... ;)

if you build they will come.......:woot::drool:

I'm very interested, but I think two reinforcing 'beams' that intersect each other (like the DEX210 stock shock tower and the TRF201 shock tower) would be tougher and look better :thumbsup:

Will it also be possible to buy the aluminium blocks seperately?

i would be very intrested, would have 2 sets, one for my brother to

I would be interested too. 4mm Carbon would be perfect. Maybe a rear version too?

André

Make the rear so the ball is on the shock tower instead of the bulkhead.

Would be rather nice with yellow/gold fleck in the carbon weave too:wub

manic

+1 chuffed to bits with mine

I would get a front tower and a rear.would be nice if camber links could go on tower like the front maybe even if the kit ones have to be removed ???

You know I'm down for one Noel. Your original mounts + DMS tower for the B4/X6 were rock solid.

any news on these ?

I would take a pair if the rears included the camber link with two mounting points.

Most definitely.

Yup count me in, i'd have a set.

Two sets for me please.

I'd be interested in just the mounts. Would it be possible to buy just these? :confused: :)

I'm waiting for my draftsman to draw the carbon bit up. But hope to have some news soon.

Origineelreclamebord the mounts will not be available separately, But the carbon fibre bit will.

Cheers keep us updated

I would be really interested in at least the front upper camber-link mounts in aluminum (given that they put the links further back like with the original tower)

Hope to have these ready for the middle of next week. :thumbsup:

If you are speaking of the aluminum front upper link mounts; put me up for a pair :)

Can we secure a pair and tower ? Or will they be plenty to go around ?

Yes please and Im sure there will be a heap that will want them after seeing the huge angle that is created with the CF towers

I've ordered a LARGE batch of the carbon towers, and the aluminuim mounts will be made by me. I currently have material to make well over 100 pairs.

Any price and date for these mounts, foto ? :)

are you going to wrap the alu around the edge of the tower so the position is a lot like the original?

All will be revealed very shortly :)

Nice .. are they going to fit the already produced towers? Or are you making a special tower?

They Won't fit any towers I've seen so far. I'll be having my own tower produced which will go with the mounts. The towers will also be available separately. But the mounts with come as a kit with tower and stainless screws.

Final price is not confirmed yet.

SHOW US SOME PICS ALREADY!

good things take time kimosabi

Sorry no pic's, Next week.

Do you need my car to model them?:thumbsup:

I'm definitely in for at least two of these.

I know a couple of us guys in the U.S. might be interested in these

I ordered an Akula Cf kit for mine, and really no fault of theirs, but the design is flawed ..Cant wait to see what you come up with. Mark me down for a kit please.

hello!
where I can buy and what price.

thanks.

Have you read the previous posts?