X2C Set ups
 

Here is a fully editable sheet for the X2C/Monkey :thumbsup:

Would someone like to test it out and make sure it all work properly. Will finish off my X4TE one and do an X2 when I get chance (They take fapping ages to put all the stuff on :thumbdown:)

Anyways should help with the set-up posting.

Too big to attach I am afraid so here is a link - Right click save as:

http://www.me-or.com/media/ansmann/Setup-Sheet-X2C modifiable.pdf

Hi Robbie
The sheet seems to work ok for me, but adobe reader won't let me save a copy with the details on? Only print it.
Is this something that can be changed or do you need the full Adobe kit to be able to save the files?
would be a handy feature to add if possible

Oh nuts. I will have a play when I get back to work tommorow. :blush: Tested at work but obviously I have full version so they worked fine there :D. Will have a look.

Have a look here (link) for an editable setup sheet.

here is my setup i love this and it works almost anywhere i go :thumbsup:

http://cardboardracing.com/wp-conten...t-X2C-carl.pdf

Link doesn't seem to be working mate.:cry:

Nice one:thumbsup::thumbsup::thumbsup:

Hi Guys I ran my new X2C today and i have to say it felt brillinat, here is the setup i used at southport

http://i42.photobucket.com/albums/e3...ups/img010.jpg

1st Meeting at Worksop setup attached i hope.

Thanks

:confused: Danhy I thought you were running the rear motored car at worksop?

Oops!

I did!

Sorry about that. So it was all the same apart from the motor was hanging out the back :) Its the future!

I thought so :) just for reference what position did you have your rear inner ball stud?

anyone got some sort of set up or ideas for multi surface on turf rippers ? this would be for the MK GP

cheers

stumpy

Number 3 on the proper sheet. So longest lower link

for the mkgp there is now no control tyre! :thumbsup: I was looking foward to the chalenge but oh well minipins it is!

yep, mini pins or the new D boot it's got a new compound:D much better than those turd rippers that dont work anywhere:o

Well said!:woot:

Has anyone got a updated one for taplow rc's new Very high grip carpet?

i will try and sort mine out and post it later

Thank you im getting my x2c friday so no rush :)

Setup Attached from the meeting at Worksop yesterday.

Cheers

Danny

Hi Danny,
Is it the rear or mid motor car?
Big bores or not?
Thanks!:thumbsup:

I used the mid car and was using the standard small bore shocks with standard springs.

Danny what oil did you use?

Ansmann stuff. Seems really good. Only difference is its cav and not what we are all used too. I think it's about 35 front, 32 rear.

That makes more sense now :thumbsup:

What was the rebound you used?
Full, none, 50%...

Very little. I probably ran about 15mm rebound. Its not something i really play about with. I tend to just bleed the shocks and make sure they rebound the same.

Dan have you flipped the wishbones on your x2c and put the rear shocks in front of the tower?

No pal. It's standard. Not thought about trying that as I think I'd struggle with steering anyway.

Cheers mate :thumbsup:

Im trying this wednesday alec so will let you know how it is!

Are you going to be racing on carpet? If so then i would be temped to stiffen up the oil a little as the car did pitch quite a bit on the slippery track at worksop. It always seems to be the way that i like my car to handle there.

Maybe going up "50" on the oils would do the trick.

Danny

Cheers Danny. Will give it a go.

I'm racing at Stotfold (astro) for the 1st time on sunday for the winter series & i wondered what weight oil to use in big bore shocks on an x2c (currently using 30w front & rear), plus any other tried & tested hints for a good base set up would be appreciated :D ?

Dan.

Has anyone got any base astro and grass setups for tracks in mid south?
Sam

Sam on the old layout at torch I ran this setup on my mad monkey. I was about 5 seconds off tq with this.

Springs - ansmann x2c black front and ansmann soft (purple) rear
Piston 2 hole STD
Oil 30 rear 20 front
Shock positions inner hole top outer hole wishbone front and rear
Links in kit positions
1degree neg camber rear, 2 neg front front wheels parallel.
80 grams of weight on servo.
Yellow minispike rear - blue insert
Yellow stagger front - no insert

I titled the shocks over to make it less nervous on corner entry but the compromise was that the shocks being tilted in meant the rebound reduced and the car jacked down over bumpy sections and bottomed out. Hence the very low oil ratings to prevent this. The thinner I went on the oil, the better the car was.

Given more testing I'd probably have played with standing the shocks up again and played with the damping a little more. Alas I've moved so no more TORCH for me.

Hoping to buy an x2c in the next few weeks and race at stotfold.

I need a bit of practice on astro for the 2012 season, Ill take it up footie astro later on this month.

Cheers

Danny,

Could you please post both your setups from the Area 51 race?! Thanks.

How was the grip level? Are you using Schumacher springs on the BB? If so, why? Are they direct fit?