comon lets see your tamiyas
 

hi this is my tt01 chasis setup for drift coments welcome comon lets see your tamiya setups !

Here's my TRF502X and my TRF201.
Scotty....

they look awsome
 

your matching shells put my old lambo shell and nissan shell to shame lol they are spottless i do need a new shell

Yeah the matching shells are pretty cool. www.mgpaint.co.uk was who did them, really good painter and very reasonable. My son's got a Lee Martin copy on his TRF201 and if i get a chance i'll put it up m8.
Scotty....

thanks
 

chears mate that would be excelent give me an idea of what designs there are i think i only want something simple like all in white with a simple pink pin stripe down the centre and maybe a couple ov sponsors names just to make it look good :D

Nice to see a picture thread for the non-TRF Tamiyas!
 

As a Tamiya fan it is always nice to see more Tamiyas. There are two photo threads here already, but they are for 2WD and 4WD TRFs respectively.

Keep them coming - I might even post some of my lorry and tanks!

come on guys lets see them tamiyas what do you think ov my setup i no its not shinny but damn it shifts !

If it were mine, I would be spending some time tidying up the installation of your electrics. Maybe turn your speedo Through 90 degrees and shorten some wires. And, it looks like you could do with some practice with the soldering iron.

But I've seen worse, and I'm sure you've done your best so far.

Maybe you'll have a go and post some more pics.

ive cut my wires down ill post some pics latter it is well shor now lol

NICE, Scotty:thumbsup:

Cheers buddy

Here's My 502x with new shell

All I need now is more Blue BLING, as we ALL know it makes you go faster! lol

http://www.tracksidespares.co.uk/for...s/IMG_0269.JPG

http://www.tracksidespares.co.uk/for...s/IMG_0267.JPG

http://www.tracksidespares.co.uk/for...s/IMG_0391.JPG

My TRF201 and TRF511, painting done by the painting genius Jon Miller from RCS Graphics Worx.
Third is my Egress with Avante decks and Avante body from 1989.

love the 201 muratti!!:drool:

here's mine

new shell design to be had for winter (watch this space!):thumbsup:

shit took your advise when maybe i shouldnt of they are too short now grrrrr
 

shit!

Kenny, neat as always. Seeing that pic just makes me wanna go out and get another TRF tourer.... Alfie your 502's looking sweet buddy....
Scotty....

As long as they reach the solder points of the motor Jamie you'll be fine buddy.
Lol liked the SHIT I've made them too short....
Scotty....

I don't think I said cut them so they are too short.. But it looks more tidy now, I'm sure you'll get it sorted.

Measure twice, cut once..

lol they do reach just need to solder it and get some new stearing blocks and need to get a new upper deck

:thumbsup:

http://i82.photobucket.com/albums/j2...artslot035.jpg

http://i82.photobucket.com/albums/j2...a/100_6519.jpg

http://i82.photobucket.com/albums/j2...a/P4212649.jpg

http://i82.photobucket.com/albums/j2...artslot020.jpg

http://i82.photobucket.com/albums/j2...e3Nov07120.jpg

http://i82.photobucket.com/albums/j2...a/101_1087.jpg

nice cars mate im loving the old beach buggy v.nice :D pissed of thow my mate is supposed to be bringingme some solder to solder my motor back on also need him to ordder me parts wish he would hurry up sheeeesh !

I know that Wild One and that Dyna Storm, i once had the honour to see these beauties run on my hometrack. Cheers mate :thumbsup:

Some of what i have owned but now sold on :)

http://i275.photobucket.com/albums/jj305/D3URY/cars.jpg

lovely looking
 

no were near as fast as the brushed and brushless sets you can have know :)

Next seasons colours.
Scotty....

Very nice!!!

Cheers Buddy....:thumbsup:
Scotty....

My Tamiya 801X with a Bittydesign Force shell on:

http://i221.photobucket.com/albums/d...0/DSC_0151.jpg
http://i221.photobucket.com/albums/d...0/DSC_0155.jpg
http://i221.photobucket.com/albums/d...0/DSC_0157.jpg

My TRF201 with Zahhak body shell and driver figure

Your 801 is really nice m8 and after seeing the Zahhak shell on a 201 painted professionally, it's deffo worth a look as an alternative to the TRF201 shell.
Scotty....

That looks great!

new but not new shell
 

this is my new but not new shell i got given to me :) fits like a dream just 2 cracks

Some of mine:

Top Force Evolution
http://img.photobucket.com/albums/v2...TFEBuiltLF.jpg

Dyna Storm
http://img.photobucket.com/albums/v2...ed03Custom.jpg

M01, M03, M05
http://img.photobucket.com/albums/v2.../MiniSet02.jpg

M05 Pro
http://img.photobucket.com/albums/v2...onteMini01.jpg

Sand Scorcher
http://img.photobucket.com/albums/v2...SS03Custom.jpg

501X
http://img.photobucket.com/albums/v2...Assembled2.jpg

511
http://img.photobucket.com/albums/v2...ftTopLarge.jpg

nice were did u get the shell chap??

Hi mate,
I got it in Italy at the BittyDesign Contest.
You can order them from:
http://www.bittydesign.net/SitoBitty...E/Home2009.htm
I also have a Kyosho one which fits well.

Hope this helps
Scott

My high vis 201 vega conversion and 511, and my low vis trf416

http://i339.photobucket.com/albums/n...e74/cars/2.jpg

http://i339.photobucket.com/albums/n...e74/cars/1.jpg

Very nice m8.
Scotty....

Here is my baby :D