oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   North East (http://www.oople.com/forums/forumdisplay.php?f=20)
-   -   York Indoor Regional (http://www.oople.com/forums/showthread.php?t=7359)

Northy 12-01-2008 07:01 PM

York Indoor Regional
 
We have a meeting last night to sort this out.

One thing that people need to be aware of:

We will not be allowing people to have large open holes in thier shells that either:

a) allow a fan to protrude outside of the shell

or

b) allow a marshalls finger to go inside the shell and get caught on a fan.


I have noticed (while marshalling - ouch! :mad: ) that this is becoming more and more common. If this applys to your car then please fix it before York Regional, we will have a scrutineer at all times on race day that WILL fail your car.

This is a BRCA rule.

Thanks,

Graham

Now get your entries in! :D

josh_smaxx 12-01-2008 09:39 PM

What about holes that do not have a fan protruding/inside of them? Just mine has a big hole in the side but there isnt a fan on any more.

Also, any chance fo a post code? :D

Chrislong 12-01-2008 10:18 PM

Quote:

Originally Posted by josh_smaxx (Post 84028)
What about holes that do not have a fan protruding/inside of them? Just mine has a big hole in the side but there isnt a fan on any more.

Also, any chance fo a post code? :D

Technically, the holes you make in the shell should only be made where the moulding is marked to be cut. This is an Efra rule, not sure if it is a BRCA rule.

I think G is more concerned about safety, than penalising someone for having a hole which causes no harm.

josh_smaxx 12-01-2008 10:23 PM

Ye, i'll put tape round the rim so it isnt sharp :)

Col 12-01-2008 11:56 PM

Bring the tape with you, so the hole can be covered (just in case...)

josh_smaxx 13-01-2008 07:17 AM

will do ;)

mattym0310 13-01-2008 06:54 PM

any other rules g?? are novak L motors allowed?? i know a few used them at teeside, not naming any names at all are we shane.. :D

oh yeh, i can help scrutineer on the day again if im needed :)

josh_smaxx 13-01-2008 06:56 PM

Oh that reminds me, can we make sure Ben is on scrutineering seens as he was annoying me about it when i did it as Teesside :D

Still any chance of a postcode?:eh?:

LEGEND 13-01-2008 06:59 PM

yeah a post code would be appreciated as the last time i went , i think you were at a different venue. And it would be a shame if i ended up going to the wrong venue.:rolleyes:

josh_smaxx 13-01-2008 07:03 PM

Quote:

Originally Posted by LEGEND (Post 84173)
yeah a post code would be appreciated as the last time i went , i think you were at a different venue. And it would be a shame if i ended up going to the wrong venue.:rolleyes:

No, your wrong, it would be hilarious.

mattym0310 13-01-2008 07:38 PM

click on the YORCC link on my sig... there is all the info. you need on the site

josh_smaxx 13-01-2008 08:14 PM

Just checked it, cant find a postcode :confused:

mattym0310 13-01-2008 08:18 PM

this has some info. think its the right one

sosidge 13-01-2008 08:22 PM

Quote:

Originally Posted by josh_smaxx (Post 84219)
Just checked it, cant find a postcode :confused:

Is nobody capable of reading a map in this day and age!

When I were a lad etc etc etc:eh?:

josh_smaxx 13-01-2008 09:08 PM

Quote:

Originally Posted by mattym0310 (Post 84222)
this has some info. think its the right one

Yep, thats the ticket! :D

Quote:

Originally Posted by sosidge (Post 84223)
Is nobody capable of reading a map in this day and age!

When I were a lad etc etc etc:eh?:

I can read a map allright, but we have a satnav so i might aswell use it.

Richard Lowe 13-01-2008 09:29 PM

Quote:

Originally Posted by mattym0310 (Post 84168)
are novak L motors allowed??

Nope not yet for BRCA meetings :(

Northy 14-01-2008 09:09 AM

The BRCA homologation lists are updated on a Monday usually, so if they go on there today then they will be allowed, if not then no. Sorry.

I heard they are in the process of being homologated though.

G

hickston 14-01-2008 05:01 PM

Not sure how this will paste

Novak
VELOCITI Series.
‘R’ and ‘L’ versions
Clear labels with Silver text.
CML
Self colour two piece aluminium.
Plain ends early ‘R’
7.5 6.5 5.5 bonded.
Grooved ends 4.5R
bonded & all sintered versions of ‘R’ and ‘L’ versions.
Stack sleeve :-
’R’ – Purple.
’L’ – Blue.
Black available.
6 Screw holes.
Sensored system. “Y” Wind
Black moulded End-Bell with Novak name.
3/16 bearing in End-cap only.
Wrapped bonded magnet in 7.5T, 6.5T, 5.5T, 4.5T approved.
Nickel plated sintered magnet in 7.5T, 6.5T, 5.5T,4.5T, 3.5T approved from 02.04.07.
‘L’ version added.

20/02/2006






26/03/2007





14/01/2008





Sorry not pasted very well, its basically saying the "L" was added today..

Northy 14-01-2008 05:05 PM

Looks like the 'L's are legal now, so you can swop the purple ring back to blue now Danneth....... :rolleyes:

G

Mike Hudson 14-01-2008 05:15 PM

YEY:D haha i'm sure plenty of people can change their purple ring back to blue now;):pthats good to hear as a fair few people would have had to buy a new motor or borrow one, thanks to brca for legalising the motors in time for YORCC :)

Chrislong 14-01-2008 06:45 PM

Quote:

Originally Posted by Northy (Post 84476)
Looks like the 'L's are legal now, so you can swop the purple ring back to blue now Danneth....... :rolleyes:

G

LOL, Dan = busted!

footey 14-01-2008 06:48 PM

o well just read this chris but thanks for the offer ;)

Chrislong 14-01-2008 06:56 PM

Quote:

Originally Posted by footey (Post 84515)
o well just read this chris but thanks for the offer ;)

Its no problem Shane, I am really pleased the L motors are made legal now! I have got so used to them.

Lindsay 16-01-2008 03:34 PM

post code
 
Quote:

Originally Posted by mattym0310 (Post 84196)
click on the YORCC link on my sig... there is all the info. you need on the site

I am old but I still cannot find postcode on York Link.

Northy 16-01-2008 04:20 PM

Huntington School
Huntington Road
Huntington
York YO32 9WT

Who's the daddy eh? :D

G

LEGEND 16-01-2008 04:23 PM

Now that is the idiot proof way of giving somebody an adress. Instead of making them look for it.:D:D:D

Northy 16-01-2008 04:31 PM

So..........

Has everyone entered? I've been sketching a track today, should be good :D

Current entry:

2wd - 35
4wd - 64

G

ben 16-01-2008 04:48 PM

Remember the track has to has some big kick ass jumps. But ones that need some sort of skill and rhythm:D

lil ben

LEGEND 16-01-2008 04:56 PM

So what you are saying is that you need a huge wall of death. I can remember the one at teesside. IU managed to hit the roof with both my 2 wheel drive and 4 wheel drive.:rolleyes::cool::D

josh_smaxx 16-01-2008 05:04 PM

Ye, we want one awesome jump that gives the car great air, has time gained from landing it properly but needs some balls to launch the cars properly :cool: wall of death would be great mind. I wanted a crossover at teesside last week :(

EDIT: well, we want more than one jump, lots of small ones aswell, make sure its still recognisable as offroad.

LEGEND 16-01-2008 05:09 PM

Yes a bridge sort of jump would be great but i am not expecting it, it just makes it a little more fun to marshall as-well.:D

ben 16-01-2008 05:12 PM

Erm i didnt mean a jump like teesside had. Full throttle and land it somewhere near the landing:rolleyes::rolleyes: I mean big jumps which need throttle control and you need to hit a landing:) At a club meeting we had a semi wall of death because their was loads of table with fold out legs so we just folded out one set of legs was good.

Ben

josh_smaxx 16-01-2008 05:17 PM

Something as big as teesside but needs more skill, make it more interesting ect, at teesside there wasnt exactly much time gained from full throttling it and it wasnt exactly hard to land. My ideal jump would be like a triple but in the floor, like 3 bumps, wide enough apart not to clear in one and close enough together not to get a good run up for the next followed by a good, long table top then one more bump right after it so you need to land it correctly or it could end up in a bad accident. Just my £0.02 :)

Northy 16-01-2008 05:17 PM

Was that at York Ben?
Are those tables available for us to use? I've never seen them....

G

AndyM 16-01-2008 05:23 PM

i don't think they are there anymore...there was a massive pile of them, but they disappeared.

andy_n 16-01-2008 05:51 PM

hiya do you need to book in ?
i know that me and my brother shouldbe defanelty coming and weve never done a regional as of yet ?

CraigM2610 16-01-2008 06:06 PM

Quote:

Originally Posted by andy_n (Post 84964)
hiya do you need to book in ?
i know that me and my brother shouldbe defanelty coming and weve never done a regional as of yet ?

i think if you pm northy with your details he'll book u in

rcracer 16-01-2008 06:41 PM

Quote:

Originally Posted by Northy (Post 84940)
I've been sketching a track today, should be good :D

G


Are we going to be able to see the corners if your only sketching the track :p

xx4-nutter 16-01-2008 07:23 PM

northy count me out of 2wd please.

sounds to much of a bad idea installing leckys in my S4 and building an x-6 up and installing electrics in that too lol

i cant wait....

should be an ace day ! last years track was awsome !;)

Chrislong 16-01-2008 07:29 PM

Quote:

Originally Posted by rcracer (Post 84976)
Are we going to be able to see the corners if your only sketching the track :p

Ha ha, its like "Art-Attack" on the gym floor....


All times are GMT. The time now is 02:58 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com