Mad Rat Bodyshells
 

HI all,
I currently have some Mad Rat bodyshells for sale, the original shells and wings retail at £27.98, mine retail at £11.99 for body and wing, they come with overspray film, I will be looking at doing window mask as well, please PM me if you need any, please add £3.00 for postage, I accept paypal. Thanks for looking

http://i29.photobucket.com/albums/c2...g/DSC00129.jpg

They are nearly £30 clear for the origional!! Thats insane!

yeah! unfortunately the spares prices aren't inline with the kit price!!

If the shell looks good then i think you may be shifting quite a lot of these!

Mad Rat body shell
 

Are these original Mad Rat body shells or copies from another maker .

i'm guessing he's made them himself as the originals are so expensive. good luck to him, awaiting photos!

I use a Proline Vortex RB-5 shell on mine as it gives a lot more room for a brushless esc with fan which the mad rat shell lacks
And it comes with 2 wings :)
Add a bit of velcro around the middle and away you go.

how much are the rb5 shells with 2 wings ? were from anymodel shop ?

About 14 quid i paid
Microtech i think

painted were that? i had to cut the window out and some of the back end of the shell to fit my esc in

what makes the rb5 buggys ? losi or who?

Kyosho mate.

but the shell in question is a Proline shell, not a Kyosho original

but getting off topic. Pics please mr Concept!

Picture added, you wont believe how hard it is to take a picture of a clear shell, thats the best that came out and I took a few!!

looks good.
would it be possible to add a "scoop" on the right hand side where the speedo sits? allowing a bit more height for the speedo and also more air in?
not sure if this could be added to the mould for the next batch of shells?

Glad you like it, as the shells develop I will add certain changes to help cooling for the ESC and make it look slightly different to the original but to be fair I run a Nosram Matrix Evolution with out fan and a 7.5 Losi motor and havent found any heat issues yet,

I must admit since buying the car I never thought I would get hooked in this class, 2WD seems to suit my driving style as I also run a Cyclone C12 at national level, just wish the car had come out sooner so I could have more summer running time ( if you can call it a summer, mostly moist with dry bits in between) cant wait for next summer now as the winter will be taken up with 12th nationals over the winter, I might have to find some indoor meetings to run it at but it just isnt the same on carpet, grass is where it needs to be!!! look out for the Crazy Rat at a meeting near you!!! this Saturday will be more or less its last race at Hinckley RCCC before we go indoors.

can you make a shell so i dont have to start cut holes out of it so my esc fits plz i need 1 as soon as because i had to cut the window out and the car get :thumbsup: wet through. as i had to cut the madrat shell up can you make it tall at the back end so my esc fits in the car.

i will have a shell if you make the shell bigger and taller were the esc sits as i had cut my shell and all the crap gets in and rain :thumbsup:

defo like the idear of having some sort of scoop to increase air flow,

can u pm me iff u do had a scoop, would like to order if so ?

MadRat bodyshells now come with window masks, please pm me if your interested.

Mad Rat bodys are now available again either via PM or via my website. they retail at £12.99 plus 2.00 postage

you at cov next week:thumbsup:

Too right I will be, quite looking forward to it, hope its as dry as yesterday, might even have to break out the mini pins!!

are the bodies cut out? or still needing to be cut?

they need to be cut out

thanks as i may want to cut a different line to get them to fit how i would like :)

message ro OneKiwi ref bodyshell
 

Unable to send a PM to this chap, posting reply up, so hopefully he will read it hear.


Hi there Simon, the bodyshells are £12.99 plus £4.00 postage to Sweden, let me know if thats suitable for you, my paypal is [email protected], please send as a gift or payment owed to avoid any charges, many thanks Eric

Thanks Eric
are they polycarb shells? What paint can you recommend? You sell paint as well?

Hi There, yes they are made from polycarbonate and will accept any poly paint, currently dont stock any paints, mostly use airbrush in the shop.

are the mad rat shells still available?

Can you make one for a Macnum chassis Mad rat +12mm

I would love a forward cab body shell, can you make one?

Hi to all, all the bodies are currently available, I have stock of Mad Rat, Mad Rat Evo cab forward, Mad Monkey and X2C, I have no plans to start making any others or changing any of the current moulds.
I used a tamiya 201 body when i ran macnum chassis on my Rat.

Any pictures of the mad rat evo body?

Have a look on the Team C website, they have pics of the body on there, please send a Pm if anyone needs one.

do you supply both the body and the wing? and what are the current prices?

cheers

They cost £14.99 including postage, they come with a wing and overspray film.

Nice to see your doing the cab forward Eric :lol:

I can't find the images on the website, can someone post the link please

Madrat evo shell

http://www.tcmodels.net/index.php?pa...mart&Itemid=71#

http://i1093.photobucket.com/albums/...n/baf3c34a.jpg

Mad rat evo shell