under tray for zx5
 

Having just bought an atomic carbon chassis from james, I now need an undertray.
Can anyone help?

undertray
 

Try this
http://www.rc-direct.co.uk/team-azar...tc-p-2404.html

rc-direct.co.uk do an undertray

they also sell the gomurph shell which unlike the kit one lets a 4.5 brushless fit very nicely

SNAP

yep, ive been running the azarashi stuff 4 a few meetings now,its all good stuff,and loadsa room inside the shell.

hi all doe's the azarashi shell fit the standard chassis ok or have you got to use an undertray with it ?

cheers paul:)

will it fit a works carbon chassis its a bit wide all the way from wapan
:D

hi paul,it shud fit the standard chassis well. i run the atomic carbon chassis,and its a touch wide,once velcro'd on tho,i dont have any problems with dirt etc getting in,and gets more cool air to the motor and electrics. hey bert,hows the brushless going?

thats a sore subject for bert !:mad: :D

ow dear !!!

It fits all the chassis types fine, it is actually designed for the KMC conversion.

If you are running a brushless, in the wet or with any standing water either use an undertray or tape up the holes under the motor. If you get any water at all into the sensor wire the motor will be bin fodder.

cheera pipe will a bj4 one fit as its the same chassis sort of anyone tried it so i can fit the new wapan shell
:D

qoute novak they dont like moisture at all good job i bought one but no magic smoke unlkie mats brand new one and his hong kong me no wallanty it:D

Hi Bert,

I have been using a BJ4 undertray on my KMRC ZX-5 for over 6 months now, I do have an azarashi undertray to try when the BJ4 one is past its used by date though. Thin velcro is the best to use, as the thicker velcro seems to bulge out the sides of the shell a little.

Hope this helps
Omen1975

Makes no odds mate, warrenty does not cover water anyway!!

anyone want an lrp brushless motor!! (only slightly broken)

Thanks for the info guys.
I have now just recieved a new under tray from R.C direct which ,if it is modified a bit, will work on the standard graphite chassis from Atomic carbon

steve
you may want to cut of the sides from the undertray and stick them to the top of the chassis to velcro the shell to.
If you put the whole undertray on with velcro under the chassis you can lose a good 4-5mm of ground clearance.
The beauty of that chassis is it has no holes for water! :D

its alive injected fresh magic smoke inside :D

Can anyone tell me where i can get some good quality speedo replacement smoke:( :D :D

Anyone know where to get the under tray in the U.S. for a KMC converted ZX-5?

OK, doesn't have to be in the US....where can I get an undertray for my KMC ZX-5?? Anyone know? link?

Try here

http://www.speedtechrc.com/store/ebp...id=482&id=6362

hope this helps
omen1975

speedtech are good,but never any in stock !!

Just made an undertray myself.
The material is a bit thick (1mm) but I had it lay around.

http://hertec.com/rc/under1.jpg

http://hertec.com/rc/under2.jpg

nice work mate,looks a good fit. how are you finding the gm brushless system? i'm thinking of getting one. have you had any problems with it? have heard that they can be tricky to set up?

The undertray fits perfect ;-) just the picture is not very good.

Bit offtopic:
I do my first races this season. Last year I was only driving just for fun therefore I can't say anything about racing the GM.

I have no comparison to other systems so I don't dare to pass judgement here.

My experience:
- Setup is very easy with the optional connecting cable for the computer.
- Setup with the button only could be a bit annoying.
- Use bigger capacitors as the one in the kit. Better 2 or 3 4700µF ones.
- good ventilation is important, some people had problems with the temperature

For more information better ask someone with more experience.

http://www.team-azarashi.com/framepage3.html
 

Try here:

http://www.team-azarashi.com/framepage3.html

Hope this helps
omen1975