B4 with Losi shocks.
 

Any comments and pics etc. as considering removing the threaded shocks on my B4

Works and fits perfectly, but you can't use the JConcepts front spoiler with the Losi shocks, especially not when they are set on the inside position on the front shocktower. You'll have to make one like these: http://picasaweb.google.be/bnkoffroa...74417662950754

Some say Losi shocks take some 'sharpness' out of the car and make it a bit smoother, but haven't tested the difference myself. I use them on my B4 and S2 and they work great.

You should be able to....since we favour Losi shocks on the X6 quite a bit and use the JConcepts spoiler all the time on the front and the X-Factory car of course uses the whole B4 front end. We dont have any issues with certain mounting holes fouling.

So what part numbers are required and do AE springs fit? I remember my Losi XX shocks being good.

Is has been written a few times here, but here we go again:

LOSA5013 Shock Mount Bushings:All XXX
LOSA5015 Double O-Ring Shock Cartridge x4
LOSA5046 Shock Pistons #56, Red (4)
LOSA5049 Al Shock Adjuster NutsW/O-ring
LOSA5050 Shock Spacer Set
LOSA5054 Threaded Shock Body Set .6"
LOSA5055 Threaded Shock Body Set .9"
LOSA5060 Shock Shaft,.6" Ti-Nitride x2
LOSA5064 Shock Shaft,1.0" Ti-Nitride x2
LOSA5079 Shock Ends & Cups (4) LOSA5129 2" Spring 2.9 Rate,Orange
LOSA5130 2" Spring 3.2 Rate,Silver
LOSA5047 Shock Pistons #55, Orange (4)
LOSA5134 2" Spring 3.8 Rate,Blue
LOSA5132 2" Spring 3.2 Rate,Green
LOSA5150 2.5" Spring 2.3 Rate,Pink
LOSA5152 2.5" Spring 2.6 Rate,Red
LOSA5154 2.5" Spring 2.9 Rate,Orange
LOSA5045 Shock Pistons #57, Black (4)


This is a list for the 4 shocks and all the springs and pistons you need.

Ok thanks I'll price it up, but was hoping they sold them as a complete pack. I assume we are talking circa £50

Try nearer £110....

Bugger a duck - oh well there goes part of my callout money, unless I get the knack of AE shocks very quickly.

You can try ebay.

Or buy a cheap second hand XXX-BK2 or CR and use the shocks and slipper. These shocks may be twice the budget, but are also twice as fun to work with :)

Will the shocks from an XXXCR fit?

yep those are the exact ones you need i had a cr before my x6 so i swapped the shocks straight over. the ones off a losi 4wd well the rear ones are to long and give to much droop and not enough up travel

I'm looking at a 4wd kit to rob them off, so I'll look for a 2wd version

the fronts are identical you could get them off a 4wd but you would need these parts to replace the bodies and shafts on the rears

LOSA5055 Threaded Shock Body Set .9"

LOSA5064 Shock Shaft,1.0" Ti-Nitride x2

Mmm not too bad then. and then obviously different springs. Circa £30 for the missing parts

the springs for 2wd and 4wd are the same

Cool :D time to spend some more money!

Good lad lol

What springs do people recommend for astro turf?

As well as ordering the two bit mentioned above I'll need these I assume:
LOSA5013 Shock Mount Bushings:All XXX

yes you will need 4 but if you buy a car that already has them on you wont need to buy extra ones if you get me. as for springs on my x6 i use black blue and green front and red pink rears but am not sure if these will be correct for the b4 due to being rear motored and the x6 being mid motored

hth

Cool, we'll see what turns up. Plan is to take the spare shocks, and just sell the car straight on without taking anything off it.

swipe the shosk bushings aswell then lol

True but want to get shot of the car easily. I paid £65 for the car, shocks and spares.

Got a link?

Don't care about the car?

http://cgi.ebay.co.uk/ws/eBayISAPI.d...m=290314367379

Spot on LOL

I thought it was a good find too :) Just hope it's not a lemon...

Anyone want a XXX CR ;)

It's a xxx4 not a xxxcr

Sorry I assume shocks will still be fine?

yep the xxx4 and xxxcr have the same shocks :) just the xx4 that has the longer rear bodies and shafts

Yeah will be fine

Cool :)

Ordered the needed bits from DMS. The base of the shocks, are they like the AE ones where the screw goes through etc.

Anyone got any pics of the shocks on a B4? I assume I can download the manual from the Losi site..

http://www.losi.com/ProdInfo/Files/X...anual_Rev2.pdf

What bolts do people use for securing the shocks

the same ones you use for the ae shocks although you may need slightly longer screws for the shock towers as the bushings that the shocks sit on are abit longer I think

Any recommendations for screws so I can order them up :)

For the tops or bottom of the shocks?
for the bottoms i would use some nortech shock bottom retaining screws and i think i use 3/4inch ones for the tops all 4-40 btw

Got a link for Nortech?

The spare shocks that arrived with the XXX4 are the non threaded version, are the parts cross compatible?

I bought the shorter shafter and threaded body from DMS, but now thinking of ordering the threaded body for the front.