Cyclone D4 specs
 

Posted on the HB site here: http://www.hbeurope.com/news/en/2007020202.html

Carbon graphite double deck chassis (2.5mm)
Front and rear carbon graphite shock towers (3.5mm)
Machined aluminium motor mount
Threaded aluminium long-stroke oil-filled shocks
Front and rear ball diffs with carbide diff balls
Optional front one-way will be available
Suspension mounts with a built-in bushing for impact durability
Slipper clutch system
Universal shafts for front, rear and center
Titanium turnbuckles
Custom body and wing
Custom wheels â€" standard wheels can be used
Tires or inner foams not included
Battery trays for 3x3 cells


http://www.hbeurope.com/graphics/new...07020202_1.jpg
http://www.hbeurope.com/graphics/new...07020202_3.jpg
http://www.hbeurope.com/graphics/new...07020202_5.jpg
http://www.hbeurope.com/graphics/new...07020202_4.jpg

If that's the finished car, they might have a problem with dirt ingression ...

are under trays still made for buggies?
certainly looks a nice car

Yes undertrays are still widely used - but it's not clear wether this car will come with one or not. the other option is chassis film. This design doesn't have a great problem with dirt ingress since there isn't much that could be damaged with dirt and the majority of the drivetrain is sealed.

The problem with this lay out will be motor / pinion access. There isn't a clear shot of the motor mounting but I assume the cells would need removing and possibly require a special (ball hex) driver to make motor install / removal easier.

Hey whats that cavalieri motor, is it just a motor or a hint? :D (rumour mode engaged)

Cyclone D4 Spec
 

I know from inside information that there is no problem getting the motor in and out with out removing batteries. But who takes out a motor with out removing batteries.;) ;) ;)

Lazy people? lol
good point though. The battery posts are the parts that really seem to get in the way on this design of car.

I meant dirt ingression from the lack of body, by the way. Just my little joke.

Elliott.

you are on a higher plane of comedy - afriad it went right over me :eh?::D

YEAH come on ad, where is the shell.

The only thing I can see that I wouldnt like is that the inner camber links will not go lower than the top plate. On the BJ4 we had to lower the ball ends quite a bit to make it go. Other than that it looks fantastic. Cant wait to see it go round the track:D

Cyclone D4
 

Those at the Teesside Regional should get the first veiwings.
I am sure Jimmy will have his camera thrust into Adams car when he arrives.;) ;) ;)

should be fun for adam:D

I will put the little lens on then :o

sound sorta symbolic there jimmy hmmmm:o
poor Adam must be sore from being probed

Apparently vaseline over the lens gives you a soft focus.

There is a current theme of threads decending into smuttiness.... cool.
:D

You told me you wasnt going. I havent booked in.:confused: You just wanted to beat me didnt you?

Par for the course on other hobby forums I frequent. :)

Me and Stu will have to pap Adam then! :eh?:

G

I think I recognize that car from somewhere....:confused:

when will this buggy expected to be out? and what price range would it be in?

Price: You'll be suprised.

When out. Hopefully before the outdoor season starts. Please don't hold me to this... but that's the target..

It will come with undertray...too answer someones previous question...
They are not on show as they are undergoing final tweaking and buffing......to minimise 'Aero Drag' -> @ Mr Doughty....:D :D :o

its a metric bj4:D

NAH, it look's like H.P.I had a load of old PRO 4 bits over and thought lets make a buggy;) :D

;)
Shame you didn't look more closely... There's only 2 parts from the Pro 4....:p
and you can't see those....

[rumour mode]
Maybe they designed the whole car like what he was already driving to bring him over. [/rumour mode]

WOW that one nice looking buggy i no it looks like the BJ4 but it is nicer.

Is there any pics of the body???:confused:

A

I'm quite honestly dissopointed. With all the hype of this car i was imagineing it to be some mad radical dezign. I'm sure i have one of them in the other room, but in blue :p

The car looks good though, any chance of some weight distribution pictures when you get the chance to see one Jimmy? I'm intrigued to see how close motor and cell placement is to other 4wds.
It will be interesting to see one close up to see some more irregularities from the 'bj4'.

I am assuming it won't be a 'budget' buggy but by that tone, it will be less than the competition.

It does look good, saying that, most cars look good these days, and am assuming, it will be released with a miriad of hop-up options, so you can make you car look like someone puked purple anodizing solution all over it?

ban purple. it is so 1990 :yawn:

if anybodu needs spare parts i sure you could order them from http://www.jconcepts.net

will this car be in the BJ4WE price range? or a fair bit cheaper?

The only information available is clues like "we'll be surprised" etc. So I am guessing a good chunk cheaper than the other expensive cars out there, maybe more in the XX4 price range?

WOW jimmy where did you get a picture of my sister from.

A

What wheels and foams inserts?
 

Hi
What is the wheel width for 1/10 scale 4WD buggy?
2.2" dia Front and Rear? Widths F/R?

What other brand of wheels fit will fit?
What is the Hex size?
Do you use the standard foam inserts that come with the tires? Otherwise what inserts?

I need to get a whole lot of gear when I get the buggy to save on postage.

Thanks Jeff

when is the release date?

:) Here in the motherland I'm being told 1st May 2007.:)

Do we have any sort of a confirmed date? I am on the border of buying a BJ4 or waiting for this. It sounds like I would save some cash by waiting, but I don't really want to wait for more than a month. Thanks.

I was talking to adam at the weekend and it sounds to be quite close I have to say.. They have part bags and the mould for the shell in-house to start pumping those out.