My slim B4
 

Hi all, after seeing the durango some time ago, and now seeing the rebel rc car, I decided to have a go myself!

Now i havent got the equiment or the money to be milling any aluminium so i did the best i could with the bits that i had, and here it is...

Comments please :blush:


http://img207.imageshack.us/img207/9...2009599ou4.jpg

sorry for the size, no idea how to make it smaller :lol:

looks very good let us know how it drives.. any mods to the body to make it thinner?

ive cut up a Persil bottle, ill post more pics after my dinner :p

dinner.. damn i havent even eaten breakfast yet.. haha

a couple more pics, including the 'shell' im using :woot:...

http://img213.imageshack.us/img213/3...2009597fw5.jpg
http://img213.imageshack.us/img213/1...pg/1/w1600.png

http://img13.imageshack.us/img13/181...2009600hi3.jpg
http://img13.imageshack.us/img13/160...pg/1/w1600.png

http://img13.imageshack.us/img13/774...2009601sj0.jpg
http://img13.imageshack.us/img13/160...pg/1/w1600.png

Hi all!...

I drobe the car for the first time "in anger" today, and i have to say i was really quite impressed! jumped well and seemed very planted throughout the corners!

I will be racing it next week to see how it fairs against the competition but its looking promising after today :thumbsup:

All i need to do now is make a shell !

Tah,

Tom

Looks very nice Tom...you're a proper little modder these days! :)

i cant resist sometimes on my days off! specially when all the bits are they calling out to be used :lol:

Looked very nice today mate. Seemed better through the corners than the others I saw you driving with. Jumped pretty flat aswell by the looks of things. Be interesting to see it go outdoors.:thumbsup:

Small update...

Just a pic of the "coca cola" shell which is my second attempt at makin one from the mould using a coke bottle and a heatgun, not amazing but does the job!

Racing and developments:

Lent the car to a friend at the track (Craig Magee) as he broke his cat... I got the impression he liked it, i then let another driver have a go, Barry Weldon, he seemed to like it and said it was very responsive although the rear wheel sometimes lifted when turning...

Ill have another update when the new chassis is done... Jay is making me a Carbon Fibre tub which im very excited about and should reduce the flex in the chassis and stop the wheel from lifting...

When the new chassis arrives, ill be making a new shell, maybe even look into getting one done properly

Comments please! Cheers, Tom

http://img21.imageshack.us/img21/6899/22032009632.jpg

Tom i really like this, you have a PM.

Tom, you should have all the parts with you within the week, i was hoping to finish the mould off today, but i'm still waiting for an item to arrive so i can complete it. The extra alloy part has been made, and i'll make up some spacers to fit the B4 Top plate :thumbsup:, i'm looking forward to seeing this done myself, its gonna look smart:thumbsup:

Great news Jay!! Cant wait to see it all done, im going to order some balsa to make a new mould for a shell, possibly getting it vacformed to give crisper lines!

You have a PM ;)

wow! a heat gun and a pop bottle. very creative. thumbs up!

Thanks, i cant take credit though, ive just done what many others before me have done

What was the first body made from? It's very sleek and kinda alien looking, very smart ;)

I hope this is good enough answer to your question

As said, i used a persil bottle, it had some basic shape and was almost long enough to cover the entire car ;)

Hopefully have the new chassis on Sunday? if Jay's coming to do track maintenance :woot:

Yep, i'll b there, and i'll have your chassis with me, i'll also have a Cat Sx tub with me to give a quick blast at the end of the day.

ill bring my tools so i can build it and race you ;):D:p

Ive seen pics of the first chassis to come off the mould from Jay...

It looks the dogs cahooners!! (Jay wasnt 100% happy so he will be fiddling with the process of making it)

However i will be putting it together tomorrow and taking some more pics and doing some testing :thumbsup:

I thought i'd put a little teaser pic up .....

http://i382.photobucket.com/albums/o...y/P1010108.jpg

more pics tomorrow when Tom gets it built :thumbsup:

Whey! Looks great! :thumbsup:

Here's a couple of pics .....

http://i382.photobucket.com/albums/o...y/P1010119.jpg
http://i382.photobucket.com/albums/o...y/P1010120.jpg

Looks great to me, but why copying the S2 lay-out?

Edit: just saw the ESC behind the battery packs, why did you choose to do it this way? Any advantage regarding balance of the car or just easy wiring as the ESC is close to the motor?

on this chassis, you have the choice of battery positions, the configuration you see above, was just to get the car running today, the batteries could be turned 90 degrees and pushed further back or even use a stick pack , there's plenty of room for moving things around :thumbsup:

Cheers Garry, was really impressed myself!! Need to make a new mould for the shell and get a rough one sorted... then its testing next week!

Rossi, as Jay has said, the layout was purely to get the car going for a practice today... Unfortunately i only took 1 set of batteries and forgot the charger so only managed a quick blast

The ability to moove the cells sounds cool, Can they be shifted flush to the servo too?

If you wanted them flush with the servo, then of course they can be moved there...

My idea was to drill several holes so the batteries could be moved further backwards or fowards depending on how you wanted the car to handle...

Tests will be done in the coming week as to finding what we believe to be the optimal position...

The car benefits from using saddle lipos as there is no risk of them shorting meaning they can be alot closer together, thus leaving more room in the chassis...

Hope this helps,

Tom

i had a mess about with some saddlepack lipo's to see how they fit, and there's all sorts of ways they can go in, if you use battery trays like Tom has, they could even go at 90 degrees to each other in a 'T' formation, as i said earlier, there's loads of room considering its a slim chassis ...... Tom, we may need to do a slimmer version :woot:, mk 2 version with a few revisions me thinks:thumbsup:

have to make sure this one handles well first :lol:

seeing it go on the track today put a smile on my face, i dont think you'll need to worry about getting it going well, your almost there, it jumps superb:thumbsup:,

more pics...

http://img211.imageshack.us/img211/8...2009667.th.jpg http://img211.imageshack.us/img211/8...2009668.th.jpg http://img211.imageshack.us/img211/4...2009669.th.jpg

Can i pay now? :lol:

you can pay as soon as you like :woot:, no saying you'll get it for a while:lol:. i'm changing the way i do them, which will give me a much better and consistant quality chassis, and a couple of parts need to be machine cut for accuracy, so the next chassis i make will be in a couple of weeks, i've also been asked to do a standard shape B4, so thats in the pipeline aswel:thumbsup:

I dont have a shell sorted yet Garry ;)

Need to get in touch with a few people this week to see if i can sort something out :thumbsup:

Cool lads :)

Some pics of the car as it was run last sunday (minus the shell, wheels and tires)


http://img172.imageshack.us/img172/6...2009686.th.jpghttp://img172.imageshack.us/img172/5...2009688.th.jpghttp://img172.imageshack.us/img172/1...2009687.th.jpg

chassis
 

Looks fab mate. :thumbsup: how long did the completion take you?

http://i382.photobucket.com/albums/o...y/P1010119.jpg
http://i382.photobucket.com/albums/o...y/P1010120.jpg[/quote]