MY FULL CARBON TEAM C MID MOTOR
 

Will start an new project.
Here is what I have to offer you.
Jerzi

Ok. No progress yet but the car will be 1cm longer then the standard length are.
Jerzi

Little progress here.
Jerzi

why are you not making the chassis and rear tplate as one peice ?.

I tryed but it was to difficult to put the transmission to the t plate. And of course the arm support.
Jerzi

I had the idea of making a carbon fibre chassis for mine. I was going to use some circuit board threaded spacers to mount the gearbox. I have used them before and they work well. I may dig out my design and send it too Fibrelyte to make for me.

Do you have some pics to share.
Jerzi

I can't upload pics for some reason

I had the same problem but found out what the issue was.
Is there on the market carbon chassis for sell to this car.
If somebody knows so please share some links..
Jerzi

More progress.
Jerzi

Iam getting there.
Jerzi

Little progress.
Jerzi

It is not ready yet but comming there..
Jerzi

At this point the car weights 1395gr without recivier.wing and the esc.
I have lots of aluminium in the car so thats wy the weight is so high.
Jerzi

Start working on the body now.
The funny mould is now ready and the mould release wax is on.
Now ill laminate the glassfiber on and that will be the mould and with the mould will my friend make bodies to me.
Jerzi

Ok.
I put one layer of glassfiber and there was an big no for that so I took the carbon cloth and start stopping that on the body.
Now the moulding is ready and I hope I have pics for you of an ready dry carbon body mould.
This carbon body is so heavy that this cant be use, but for sure it is stiff.
Jerzi

The carbon body mould is great but not near ready.
Jerzi

Some progress on the body.
Lots of putty and lots off sanding near future to come.
Jerzi

Body is allmost ready.
Just the clearcoat and offwego.
Jerzi

Okey. I have done some misstakes on the mould so today I made an carbon body so lets see how good it is going to be.
I used 600gr carbon cloth so it is going to be very stiff.
More pics tomorrow.
If you have some question about this project so let it come.
Jerzi

Body allmpst ready.
Jerzi

Chassis is the mould for the undertray.
Offcourse it will be made out of carbon.

The carbon undertray is now moulded.
Weight aprox 35gr
I think this undertray will be the best looking undertray on the market.
Jerzi

Out from the mould (the car) andnow I have to fix it right.
40gr is the weight.
Will try to fitt it in the car.
Jerzi

Nice work, why dont you make the chassis a 'tub' similar to your undertray?

Well yesterday I really get the idea that Ill make the undertray.
I have done one tub chassis for the rc10 and it was so much work so it must be an very special project if iam going to do one more.
Jerzi

Now when the body and undertray is almost ready I have now disamble the car.
Now I have to finish the chassis and then I have to put the electronics in.
I have to figure out how to put the battery in the chassis.
Jerzi

The car is almost ready now.
But the biggest problem is now how I put the battery in.
I have 4 pics to share with you and there you can see the options.
Wich is better??
Jerzi

PS the chassis is now yyber stiff.

Now this part of chassis is ready.
Jerzi

Now the battery is installed.
Its very easy to change the battery place if this setup doesnt work.
Jerzi

Now the batt is installed.
Jerzi

Did you make the wheelbase longer whilst you were at it?

I was making it about 5mm longer than it is now but did some mistakes so it is now as long as the EVO chassis.
Today i took ot out for an spin. Superb car. Next weekend is an big race and thos car will be driven by an young guy 12year old i think but very good driving skills.
Are you in facebook??
If so I have an site were is lots of video stiff from races and lots of vintage cars but all in Finnish langue.
Jerzi

Almost an ready car...
Jerzi

LOL I need one of those to drive my car!

I don't do facebook but did see some of the very fast Scandinavian 9 year olds at the Euros.

Yeah he is tomorrow at the race and ill interview him and his father..
Jerxi

Okei.
We did an amezing 14 place.
There was 46 driver. Many topdriver was left behind. The car was looking superb on the track.
This was more than we could expect from the weekend.
We didnt adjust anything in the whole day. Just have to look on the screws and nuts.
Jerzi

I really like my tc02c, it goes great and I will be getting the new evo version when it is out. I did have some ideas similar to yours to do to mine as I have made many chassis in the past. Glad its going well for you tho mate.

Thanks.
For the next race we will setup my rear motor carbon team c.
So if any intrest to follow so please.
Jerzi