Lazer ZX-S Evo Build
 

Hi Chaps.

I've sourced all the parts needed and have decided to take the plunge.
All parts are ordered now except LA-103 and LAW-12 which I'm talking to 'mvh isobarik' about.
Here's a few pics I've taken of parts prep.
Note. Coffee. Very important!

Nick

Brave man! I look forward to seeing this one...

Let me know if you need help with part dimensions...

Just dont run it as the plastics brittle and the kick up plate bends quite easily. Still you anywhere near the maritime track as im racing there on 7th april so can see one for yourself, but is heavilly modded. .

OK finally got my computer to let me use the web so check out my version.

http://www.petitrc.com/_forumphp/sho...763-Lazer-ZX-S

Welsh did crash get tha last LAW-20.1 ???

crash you could just have posted in the lazer thread

mvh Isobarik

No, its the only one ive got left and will only part with it if I get £100 for it. Ive also got a brass rear tower mount going for £50 and a few rear and front belt £15 each and some front gearboxes £10 each.

James, any chance of dimensions of the kick up plate?

Then once mvh has got me 103, Law-12, the center gear and the belts, I'm good to go.

Cheers
Nick

Just 20-1 (kick up plate) would be great. I can fabricate ally.
Cheers pal

Nick

Pm me your email address as ive a jpeg of the dimensions

Ok finally got it to work Nick, hope this is ok.

That's great pal!

Do you know how many degrees the bend is?
Nick

Unsure, maybe iso can help as im not near my car.

I can post a side profile pic to help...I will do this evening if you can wait.

Or MVH may get there before me.

its

ISOBARIK

mvh stands for med vänliga hälsningar in swedish basicly the same as

best regards ....

mvh isobarik

best regards

Isobarik

nope dont have a clue ....

and

crashtest33 you do realice that with all the stuff

we are looking at a total of 160 plus shipment

Euro or £ ?
Could you give the price of each item.
Spending that sort of money is no problem but I will need a proper invoice

Can you PM or email me an invoice.

Cheers pal

Law-12 contents
 

Hi chaps.
Just wanted to confirm the contents for LAW-12
According to my manual you get;

96, 97, 137, 138, 139, 142, 145

139 - Hyper disk plate (la-118)
138 - Slipper pad (um 123)
137 - Inner disk plate
96 - Main shaft (law-12-1z)
97 - One way drive gear
145 - Ball bearing
142 - Spring (um 124)

Can anyone confirm this as 'comunication' with "my guy" is very hazy.

Cheers.

Kick up plate
 

Right..sorry for delay.

I've taken pics so you get an appreciation of the plate's kick up.

I can't give you the angle, but you maybe able to work it out from the pic!

Chucked out the protractor after doing my GCSEs :lol:

http://i1232.photobucket.com/albums/...ps2377c63e.jpg

http://i1232.photobucket.com/albums/...ps04fa80fd.jpg

http://i1232.photobucket.com/albums/...psf9492efe.jpg

I had an idea what mvh stood for!

Just having a fun!!

bw Naushad :lol:

nope it doesent have the LA-118 since when the hyperclutch came it was made for the zxr ....there for it has an plate that fits the la-2 and tm-7

mvh Isobarik

Great info, cheers.

Could you do pm me a price breakdown of the parts I need.

p.s. Where on earth are you getting them from?!

Nick

LAW-20-1 done
 

Mock up done.
Not bad, as soon as my chassis arrives I'll check it fits then make a super tidy one.
Nick

I think youll find the hyper clutch was developed in the s before it hit the mk2 buggy. The hyper clutch was in the 93/4 models and were passed onto the teams for their zxrs.

njaaa..... part number says otherwise

mvh isobarik

Like the "rest her soul Brittany Murphy" sad in Don´t say a word

I´ll never tell..........

mvh isobarik

That's fine but,

SEND ME AN INVOICE!!!

;-)

Gear & Diff Covers
 

Hi peeps.

Is anyone going to bother making the gear and diff covers?
Shall I contact Kamtec?
Nick

You have a ZXS Naushad? Cool car..!

LA-116 & LA-118 Ordered!
 

Hi peeps!

On a roll now! Managed to make LAW-20-1 and I've got a friend in the US who has ordered LA-116 & 118 from Kyosho US (in stock) to forward to me USPS.

Rather excited now.
Just need LA103 & Law12 from Isobarik when he gets round to it and we're laughing.

Once this ZX-S is made entirely from NIP parts can I call myself a true ZX-S owner?? ;-)

I do recall Jamie Booth running it in his nats winning car and I may have got the years muddled up, as he may have won in 92, a year before the s.

I have some used LA-103 parts,used front bumper and like mint upper arm,good condition gear cover cap

Parts stock building!
 

Hi peeps.

Stuff's started being delivered now. My main suppliers are Chris Powell (aka Fireboy) in Long Beach, Myles (aka. Vintage-Kyosho) and Hobby Japan on eBay.
Waiting on parts from Fiberlyte and a few bits from you lot and it's Rock & Roll!!

Wow that reminds me of my Mid SP Build! I'll be posting a similar picture this weekend for my Next Project (SWB Mid)
I couldn't make out which shocks they were in the pic, I'm going to have gold velvet shocks on my ZX-S

Everything is exactly to the manual for the ZX-S Evo, so they're the W5181/83 set with blue caps.
A kitchen table covered in Kyosho NIB parts is up there beauty-wise in E-Type Jag territory if you ask me!

Can't wait to see your SWB build parts pal!

congratulate the new lazer zx-s owner！

Not quite yet, but there's hoping!

I collecting zx-s series for years but now became pricey and more hard to find.

By the looks on the pic you seams to be missing the LAW-12 slipper what if someone super human, lazer guru , awsome person could fix that for you ....:woot:

mvh Isobarik

Iso,

I believe Crashtest33 is also waiting on you for a few items as well and know that he is biting his nails in anticipation as he like you and I has an addiction to the design concept and looks of this beast. He should be getting a couple of items shortly from me and hope your going to add the icing to the cake.:drool:

Belts received!!
So to are my carbon chassis parts!
Gonna check my home CNC'd LAW-20-1 fits tonight.
And I've decided you lot are just mean ;-)

I saw you will using OT-16 alum knuckle arm, kyosho already replaced plastics one since zxr, but I still love the alum one.:lol: