Just dug out grants set up for talywain which was a very bumpy/rutty track, the only difference is 30wt oil in the rear and the anti-squat 2mm rear 1mm front. Grant made the 'A' final with this set up.

If the track is really bad you might want to try moving the shocks to the back of the car haven’t try it yet but lots of the team drives recommend it for this type of track.

Mike

Ok thanks, need to cut of these diafram things, how much do you cut out? also ordering up some new 3 hole pistons.

Will try the shock mod again once I'm got a base point to work from again. Just a shame I am sorting it out with summer ending :(

remove it all and you are left with an O ring, thats it.

just in time for worksop :D

Anyone have set-ups from Euro's in Spain, Bilbao??

you will get something either here, here or there.

Hope that help!

pretty much

When i started testing the SX last year, my preference was to run with the diagrams cut as i felt this removed some of the pac on the shocks. The best thing to do is try both and see what suits you. The team are all running them cut.

Si

Do you fill the shock caps with oil too like the team associated ones or leave it as air?

No, but to be fair have never filled the Associated ends up either. I leave them as air.

Si

What would be the preference - front one way diff, or one way layshaft and why? What are the differences in the characteristics of the car?

Hi All...

Anyone have any setups that will be a good start for Broxtowe this weekend please ?? :thumbsup:

Cheers

Lee

grants set up is pretty much the starting point for 90% of the tracks now,

Robin Hood Raceway Round 6 BRCA National

A - Final 8th

.jpg Setup Sheet - James Helliwell

Im off to Broxtowe in abit Panch so come and see me if you want.

Si

Hello!! Can anyone reccomend me setup for wet astroturf track, and cold weather (about 5 degrees C)????

Indoor setup minispike-slicks...
 

In Norway we drive with slicks at our carpets (yello minispike slicks).(touring/m-chassis drives the same day).

The grip is medium-to-high, does enyone have a setup for the cat sx with slicks??

Thanks.
Stig

Bury Metro
 

Hi, does anybody have any setup tips/sheets, from bury indoors. I struggled with the CAT SX it felt very slippy (perhaps thats the 5.5T X12?)

Any ideas for shock oils and what hole piston?

Weight or not?, I had centrally mounted 110g strip fitted from racing outdoors.

Cheers for any help:D

we had no weight underneath the chassis at all,a 5.5 was way to much and caused us loads of problems 6.5 or even 7.5 is fine.other than that pretty much std set up as already mentioned,and for some reason new tyres seemed better than worn this time,

Tyson i did get your pm, apologies for the delay in reply! Ill post my TQ setup later tonight.

Si