What are the rear toe in blocks made of?
Looks very nice! Stealthy.

S2 shell has always been one of my faves

Nice looking car, I do like that bodyshell.
It's going to be interesting seeing how the production version compares with the likes of the Vega.

And mine ;-)

I am loving seeing this car wrapped in something I created, gives me goose bumps :thumbsup:

Do you get royalties on every kit sold then?:woot:

Was wondering when you would post Craig!!!

I remember racing the S2 at the Belgium GP three years ago :wub

looks cool craig :thumbsup: top job !!

Centro is go go
 

Well Marc from MK called yesterday and it looks like we are go for this week chaps...I repeat StarShip Centro...you are cleared for launch! :):woot:

any one no what the wheelbase of the centro is?

LMFAO.... I wish.... I'll have to make do with a "top job" off of Wezzer :-)

Keith/wez

We need a indoor setup for Worksop

Can you upload one please

Also one for carpet if possible

Gaz

ok will get on it and post as soon as :-)

Some set-ups from Worksop.
Not totally complete but there's enough info there:

Ben Jemison

Front shocks :
32.5wt #2 pistons
Kyosho yellow springs
Middle on tower inner on wishbone
Can't remember the limiters

Rear shocks
30wt #1 pistons
Ae silvers 2 limiters
2nd from inside on tower
Inner on wishbone.

Medium wheelbase
1degree anti squat
Rear link 3 holes from top
0 degree hubs
No front balltud
6.5 inch wing.
Reedy 8.5 - 78/23
Brass front bulkhead with brass brace
10g of weight underneath the steering rack


Paul Bradby

Front Shocks:
30wt #2's
Silvers
Inner on tower
Inner on wishbones

Rear Shocks:

30wt #1's
Ae green springs
Inner on wishbone
2nd hole from inside on tower

Medium wheelbase
1 degree anti squat
Rear link 2 holes from top
0 degree hubs
1 front ball stud washer
6" jconcepts wing
Lrp 7.5- 23/78
Brass bulkhead Delrin brace
42 grams under steering rack / servo horn
30 degree hubs
Steering arms middle on caster block

CML are just modifying the set-up sheet to suit the finished car so we'll get the finished articles up as soon as we can.

It looks like a Mardave Cobra with B4 front suspension and the gearbox turned around :p (before all the slagging starts,i`m joking!!!):thumbsup:

Cheers Keith :thumbsup:
1) I thought the anti squat was a standard 2 degree and couldn't be changed?

2) Can you confirm if the rest of the team are using AS9730 plastic zero degree rear hubs and not the alloy ones etc. I'm guessing standard in the set up sheet means these from when I last spoke to bradders!

3) is no one using ghea pistons this season or last in the c4???

4) what are the best ways to secure the shell on the sides?

5) Any news on the new shell wez is looking at doing?

6) Are the c4.1 wings going to be available separately or not?

Thanks that is all :blush:

Thanks wez!

Few questions above for you both !!!!
Have any kits been shipped yet to the shops?

:thumbsup:

Shopd are picking them up today i believe :)

Delivered this morning!!

1) the rear pin block can be flipped to give 1 or 2 degrees of anti-squat ( its marked on the block )



2) yes they are , but that’s down to them wanting to run/try 0 degree hubs and i think they just used the plastic ones to test and stuck with them.



3) as far as i am aware no , but that may change!



4) i would personally take an off cut of the shell say 1 inch square and bend it through 90 degree, then slip it between the lipo cradle and chassis using them to clamp it in place. then a dab of Velcro on the shell and body and that should be it ( i am going to do a small report on how i did it on mine and post it up )



5) working on it and as soon as i have the first pull on the new design and we are happy i will let you all know



6) not as far as i am aware no but i will ask the question and push for it to be sold separately.

First part of mine has arrived today. (The rear chassis brace) LOL
should have the rest of mine later today or tomorrow morning :)

Ive built everything from my b4.1 kit up ready.
All i need to do it screw to chassis and fit my already paint shell and wing :)

Will try to post pics of mine later tonight! :thumbsup:

http://i10.photobucket.com/albums/a1...l/c41mount.jpg
this is just a quick rear body mount i made in 5 mins, just nicked a bit of lexan out of the back of the shell ( about 40mm x 60mm )
then cut it length ways, put a 90 deg bend in it 10 mm from the edge and pinched it between the cradle and chassis, bit of velcro on the shell and mount and jobs done :-)
one either side and that suckers going no where ! if i had more lexan i would of made them the length of the cradle tbh ! :thumbsup:

I don't suppose the new 'wezzer' shell might have an undertray to go with it as well? If not, could it? ;) Just thinking I'd like to protect that black anodising from damage... :thumbsup:

Do I win anything for spotting the fact that there was no antenna mount in the box?? Or is it just my kit thats missing it?? lol

Just need my lipos to turn up so I can finish the build.

The Vega didnt come with a aerial mount either, I used one from my Durango radio plate, looks nice and neat and takes a bolt straight up the middle of it.

Tried a alloy aerial mount but they dont seem to grip the aerial tube that well.

Westw00d's Centro C4.1
 

Here she is can't wait to run it, will get better pics tomorrow in the day light, some of you might of seen this shell somewhere very recently :thumbsup:

http://img214.imageshack.us/img214/4554/centro2.jpg


http://img51.imageshack.us/img51/6476/centro1n.jpg

looks great!

What are those white clips that hold the sensor wire?

Thx

There silver aluminum clips with servo tape on the back. They've been around for years.

Must be something from the 80's :D

never saw these in our club or even at a national.

Where can you buy these?

Hi mate i got them from rcscrewz when i did an order, great little clips.

under what category?

Cheers

Team Associated Antenna Kit - #6338

U2856 on the schumacher website
They are called sticky clips

C'mon lads....get some pics up with your new cars then.....sod the sticky pads!!:thumbsup:

My latest work :) - still lots to do.

Weren't the blue spacers meant for the wing mount not the ball studs?? Altho looking at the instructions there were meant to be spacers on both the wing mount AND the ball studs even tho there was only 1 set of spacers included.

Ive used 3 mm spacers for ball studs (not in kit, just my preference) and I have used the 2mm spacers for wing mount. All parts were in the kit. All went very well together, still few tweaks to do, overall very pleased with purchase :thumbsup:

Some further pics for further interest.

Collection mine from MK today..... day off tomorrow for build :thumbsup:

HAPPY ME!

I'm jealous - my kit is sat on my workbench at home while I waste the day at work:bored::bored:

Still, we got our TORCH AGM tonight so maybe no-one will notice if I sit in the corner and build it while the rest argue :D

Rob

:) i was contemplating it ! didnt know if there would be enough call for it tbh ! whats the general opinion
undertray or no undertray ???

Id like one wez, i've stuck some carbon fibre look m3 stuff on there for now ;)