hey Dodgy Guy ,

the bolts with 4.9mm diameter and 8mm long have article number ; 362651
the plastic cups have the number ; 302665


grts

Hans

Thanks Hans
Do the plastic cups screw onto the original K1 Aero turnbuckles ok?

Yes they fit on the original turnbuckles :)

Anyone running cougar rear arms like team boys?
Are you running k1 or cougar rear driveshafts with them please?

Have been running couger arms for a while with original shafts this configureation allows you to extend wheel base which helps on high traction

Shorty
 

KF U4456 + 125t belt
http://s1036.photobucket.com/user/ca...tml?sort=3&o=1

shorty in K1
 

Hello all and especially Carlos,

That is a nice option to have.
Did you run the car yet with this conversion?
Where did you get the 125t belt?
there is one on the schumacher site:

U2238Rear Belt; 125Tx4mm - SST Axis

Is this the one you used?

Greetings

Hans

Hi Hans,
Haven't tested it yet, .... soon !
The belt is from RobotShop Inc. item # RB-Ftr-38.
I didn't know Schumacher had one too. thanks ! The belt I got feels stiffer, it has a bit more reinforcing.... which does increase resistance. I will try this one for now until I can get the one you mentioned.
Cheers
Carl

old belt
 

Hi Carl,

Thanks for the belt part nr.
I wonder if the belt i found is strong enough, its from an older car.
Let us know how it went!

Hans

Thanks for your input! ;)

I posted up the items that I received from the factory to upgrade my car to Aero spec, hopefully someone other than the truly awesome will have gotten some benefit from the list I posted.

So yes - not all parts are required or "mandatory".....I simply posted up the items so that people could reference the list - if they wanted to do the whole lot or just pick and choose - the list was there....... as it had not been done previously.... Apologies for the lack of the list to upgrade to big bores.

Live and learn I guess!! :thumbsup::p

Cheers

dArryn

Hi all was out with my aero Sunday at worm / Weston super mare mendip track car is sweet but it was snapping out on me mid corner is there anything I can change to stop this ? I notice a lot of the team drivers are running low hi on the rear arm mount wot is this for and conditions ?

So how do ppl like this new Aero compared to the K1?

and is anybody using the FAB in this new Aero?

what will be good option/spare parts?

No one? :confused:

what a shame :thumbsup:

I run the K1 for a while and a lot of updates make sense to me toward a better car, big bores, carbon chassis, stronger top plate, gear diff so yes the Aero is a better, easier car to drive.

The FAB will work of course, never got the chance to try it (but did on SX2/3).
Try the car without, I did not thought it was absolutely required as the car was great as is.

Thanks for the reply :)

how much room is left for the shorty to swell up? before it touches the belt? lets say the shorty gets warm under load.

Hi rear arm pin height changes roll centre and makes rear looser.
If its mid corner and on slippy astro are you running roll bars? also try shocks on rear

No not running roll bars as don't have them will give putting the rear shox behind the tower a go and see if that helps

Get the rear roll bar kit will make a huge difference and support your car on the high grip astro tracks