my durango
 

i have done many rc bodies over the years so here is my latest a 210 using the cab foward dimec version on the standard chassis i decided on the theme after watching a discovery programme on the fear of extinction of the tiger, i hand painted the tiger coat and used cans for the overspray of the colours using transparent red orange and white, this is going to be my racing colourscheme from now on. the othe is my brothers i will post some shots of that later, hope you like them :)

more 210's
 

here are more shots of another body i did for my brother, i decided on a carbon fiber theme as his last car was that way but i introduced a flash of dayglow red to set it off. sometimes a dark colour used with a hint of dayglow can be very effective rather than a lot, the base for the body was lame flake-tamiya about 3 light sprays, this stuff is expensive and you dont need a lot to get the effect so go easy if you ever use it. i hand masked the parts for the dayglow and changed the shape of the windows and hand painted the pop rivet edges and tinted them with transparent red which i also did on my own car.then i hand cut carbon fiber vinyl for the main body areas available on ebay and finished off with hand cut pop rivets on the body from high quality vinyl.i then adde details like a wiper fuel tank cap mirrors, door handles , and emergency signs in vinyl also, hope you like:)

its fine but if you continue the yellow and green onto the wing it will visually make the car longer and bigger, very caterham f1!

My Durango 210 with full Vampire Electrics, Exotec Alloys and JConcepts shell.

http://i34.photobucket.com/albums/d1...psdf05ab2a.jpg

http://i34.photobucket.com/albums/d1...ps7fb6ecfc.jpg

My Matching Micro GTB in there too :)

Here's mine had it since beginning of November and love it :)[img]http://i1314.photobucket.com/albums/...psdg5rx898.jpg

Fully loaded v3
GOLDFINGER !!

Mine:
https://imageshack.us/a/img811/9854/lmf8.jpg

Very tight installation but dualsky esc is helping a lot!

Nice install Airwave!

Where did you get the word clamp?? Looks very trick

Yup, I could do with a couple or three of those! Nice fan/fan cover too.

Oh, as an aside, a couple of those nuts on the steering assembly are fitted incorrectly. They need to be upside down so you can get a tool on them. (You can get a tool on them right way up, but it's a pain in the arris)

Hello all,

Long time reader love the info available in the durango section.

Currently running a Dex210 and a Dex410v3.

Finally got some new shells with the Durango 210 release paint scheme.

210 body is the durango foward cab and 410 is the proline bulldog.

http://i294.photobucket.com/albums/m...ps4cd2bf3b.jpg

http://i294.photobucket.com/albums/m...ps8d82d25f.jpg

http://i294.photobucket.com/albums/m...ps3f066673.jpg

http://i294.photobucket.com/albums/m...psc4947720.jpg

Has anybody got any pics of there 410 with the new v4 shell on?

Here is mine
http://i569.photobucket.com/albums/s...ps6a254f52.jpg

http://i569.photobucket.com/albums/s...psebf22eea.jpg

That looks ace Martin. Very cool. :thumbsup:

thanks simon here is install and tresrey hop ups
http://i569.photobucket.com/albums/s...psc4e461d7.jpg

Attachment 61948

Attachment 61949

V4 shell back from the painters, decided to go retro to match the short course.

Loving the new colours chief. Soo cool. :thumbsup:

Just thought i would share a few images of my DEX408v2 i built this week.

Attachment 61950
Attachment 61951
Attachment 61952
Attachment 61953

I feel left out. Bulldog.
http://i45.photobucket.com/albums/f5...psf833451c.jpg

https://fbcdn-sphotos-d-a.akamaihd.n...81472318_n.jpg

Here a nice action pic from 1 1/2 years ago when I first got the car set up as rear motor.

http://i696.photobucket.com/albums/v...psfecdd69d.jpg

And the finisher body fresh from the painter. No pics of the TD +8mm cab forward with a very similar design but wrapped