pm'd back fella.

Anybody else interested in a 1mm track brace, there must be more than 1 wanting one. ;)

Not me pal.

Stegger,

I assume you have received my Paypal payment.

Kurt Sallaerts

Yes mate sorry (been very busy) and the brace was posted yesterday morning mate :thumbsup:

No problemo :thumbsup:

Thanks for the brace!

Can i order one please!!

PM'd fella :thumbsup:

:blush: Steve, I need another brace dude...

I hit a kerb flat out, and it ripped the car to shreds. But testiment to the brace, it didn't let the pivot pin splay out and therefore saved the purple blocks..... what I did to though is bend the hing pin screws, sheer two screw heads off and turn the Alloy brace into a 'Z'...

Ive now fitted a new front end to the Cat, with M4 front screws, and using another Brace (thankfully I got another off you at Ozfest) :thumbsup:

So yeh, highly recommend. The nature of the alloy bending is perfect - could have been a lot worse than it was for me.

You animal :lol::lol::lol: if you haven't got my details chris PM me

Down to a hand full of 2mm braces chaps ;) until i get new stock in a couple of weeks were the 1mm brace will make an apperance. Other stuff for the Cat SX in the pipe line as well :drool: keep tuned.
[email protected]

hey up steg looks like were going to need one of these bad boys,pm us details please

Carl, carry 2 ;) They are made of Alloy which is ideal as it allows some flex and give without the screw bending, but without limiting anything else, but in a large impact (ive had many LOL) they do twist and bend while saving other more expensive items. ;)

Bigred , you could have had it off me yesterday, i walked right past yeh when it was raining going back to my car with the Mrs :o You have a pm fella.

Limited amount back in stock of the 2mm brace :)
1mm and 2mm in stock very soon :thumbsup:

2mm & 1mm braces will be in stock pm tomorrow.

£10 each or special price of £17 for 2mm and a 1mm brace.
I will be at southport on the saturday and sunday afternoons, somewhere near the schumacher team tent or pm me on here or email me at [email protected]

Regards steve brew :)

See you at the weekend Steve!! :)

When will you have some team clothing???? ;)

Please can people supply the correct postal address and discription of what they want when contacting me ;);) it means you get your stuff a bit quicker. :thumbsup:

just fitted the 1mm brace to my car,, i have used a 1mm washer on both side on the inner side to. the wishbones have gone really stiff. dnt suppose this is suppose to happen do i need to shim it out? cheers

Make sure that you fit with NEW blocks, if you have been using the car without a brace, chances are they could be slightly out of shape and the hinge pin could also be bent ;) After you fit your brace leave OFF the backing nut and washer at the back of the front hingepin and then tighten up the block screws to let everything square up.
Happy Christmas to yeh and all our BW-RACING customers :thumbsup:

Hi Stegger,
I would like to order two 1 mm braces.
I have PayPal.
Let me know what to do.
Thanks:thumbsup:
Kusal