oOple.com Forums
Page 5 of 17 « First 34 5 6715 Last »
Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team C Racing (http://www.oople.com/forums/forumdisplay.php?f=189)
-   -   TM2 (http://www.oople.com/forums/showthread.php?t=114774)

DCM 26-11-2012 11:58 AM
I hope they make the body out of lexan/polycarbonate now and not the split and crack PEP material!!

marcel 26-11-2012 12:02 PM
Yes it wil be polycarbonate.

Robbiejuk 26-11-2012 12:40 PM
Quote:
Originally Posted by Gonky (Post 716559)
Just a little picture! :lol:
Could you make it a bit bigger. Then I can up my resolution more.

So they haven't made a new body, it is just the cab forward Tc02c shell then? Doesn't look a particularly good fit round the bottom :cry:

Kusal 26-11-2012 12:45 PM
Looks like it.
There is still a place foreseen for the slipper of the TC02C while the slipper of the TM2 is not there anymore!
I would prefer a new body but if I have to choose for the TM2 with the "old" body asap or TM2 with a new body later on, then give me the car with the "old" body (yesterday preferably!!):thumbsup:

mof 26-11-2012 01:49 PM
Quote:
Originally Posted by Robbiejuk (Post 716570)
Could you make it a bit bigger. Then I can up my resolution more.

So they haven't made a new body, it is just the cab forward Tc02c shell then? Doesn't look a particularly good fit round the bottom :cry:
Seems like the rear bodypost hole is not drilled and that causes the rear end of the body to raise slightly.

Chalkie 26-11-2012 09:28 PM
Well I guess you can just swop shells with a TC02C, will make life easy when the kits first get here.

goos 27-11-2012 08:13 AM
Quote:
Originally Posted by Kusal (Post 716572)
Looks like it.
There is still a place foreseen for the slipper of the TC02C while the slipper of the TM2 is not there anymore!
I would prefer a new body but if I have to choose for the TM2 with the "old" body asap or TM2 with a new body later on, then give me the car with the "old" body (yesterday preferably!!):thumbsup:
The TM2 has the slipper in the middle beside the motor. Just like the T4

Kusal 27-11-2012 08:48 AM
Quote:
Originally Posted by goos (Post 716797)
The TM2 has the slipper in the middle beside the motor. Just like the T4
Correct; so it is a re-use of the TC02C cab forward body and not a new one (yet).

adon30 27-11-2012 09:50 AM
Quote:
Originally Posted by Kusal (Post 716805)
Correct; so it is a re-use of the TC02C cab forward body and not a new one (yet).

Have a look at post #25. The body looks like it fits ok there and looks quite good.
They still have over a month if they need to produce a new bodyshell though. But it's great you still have the TC02C options available.

JezT 27-11-2012 11:15 AM
When mine arrives :thumbsup::wub First thing I'm going to do is borrow someones DB1 shell and see if it lines up! - from comparing plan view photos they look very similar and I love the flatter rear part of the DB1 shell.

......Unless Team C come up with an uber sexy shell, that is.

jlucas 27-11-2012 10:06 PM
Is there any video footage of this on track?

welshmerlin 27-11-2012 11:38 PM
Quote:
Originally Posted by JezT (Post 716831)
When mine arrives :thumbsup::wub First thing I'm going to do is borrow someones DB1 shell and see if it lines up! - from comparing plan view photos they look very similar and I love the flatter rear part of the DB1 shell.

......Unless Team C come up with an uber sexy shell, that is.
Where did you order it from Jez?

marcel 28-11-2012 12:10 AM
Quote:
Originally Posted by jlucas (Post 717041)
Is there any video footage of this on track?
<iframe width="560" height="315" src="http://www.youtube.com/embed/dLnh2qOZDww" frameborder="0" allowfullscreen></iframe>

Robbiejuk 28-11-2012 12:29 AM
Quote:
Originally Posted by marcel (Post 717091)
<iframe width="560" height="315" src="http://www.youtube.com/embed/dLnh2qOZDww" frameborder="0" allowfullscreen></iframe>


The one that was on pole?

marcel 28-11-2012 09:39 AM
Jup the white /red ish:)

Skye 28-11-2012 09:50 AM
Quote:
Originally Posted by welshmerlin (Post 717077)
Where did you order it from Jez?
I'd say this looks like your best bet.... :thumbsup:

http://www.smddirect.co.uk/index.php...roduct_id=3857

JezT 28-11-2012 10:28 PM
Yep - Pre-ordered from SMD. Thought I'd stay with a UK company

Tbone 29-11-2012 07:07 AM
Quote:
Originally Posted by marcel (Post 717138)
Jup the white /red ish:)
The Driver is Oliver "Oli" Scholz,
was his first outing with the car and his pace was awesome.
Dominating a real strong driversfield.

regards Tom

sascha_rccm 02-12-2012 01:51 PM
Tibone's ride: :drool:

http://www.youtube.com/watch?v=XTeyHtE5DBA

ben44 02-12-2012 02:31 PM
Nice, did you do some in indoor with mini pin?


All times are GMT. The time now is 01:06 AM.
Page 5 of 17 « First 34 5 6715 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com