Are these back in stock currently?

Yep, Plenty in stock. :thumbsup:

So what does this kit do different than the TLR kit?

In a nutshell, Adds rear traction without giving the car the pendulum effect of having the weight out the back.

Chris Evison (post 2) is a team driver who drives at Southport, my local track. He asked me to look into making something and this is what I came up with. 10 months later and he still has it in his car. I'm guessing it does what he wanted it to do :)

Shameless bump :o

creme weight
 

i was wondering if you had any in stock, i have bought 2 already one for my buggy and another i put in 22t, now i need another for the 22sc thats backorderd for me =)


Craig

Hi Craig, yep plenty in stock :), I've still got a couple of stainless ones in as well if anyones interested in them.

Buy this optionpart
 

I will try this Optionpart. Please sent me a PM. How we buy and sent it to Germany.

PM sent, bit of as rush on these today from Germany, Have I hit another forum or something?

I think the reason for this is the German 2WD Masters next weekend, where everyone is looking for the last extra tenth of seconds :D Just got a 22, too and as soon as I can test on the track after the masters, I perhaps will order one set too :D

Hi, I would like to buy one of these, I will not be able to do so until the 1st but can u reserve one for me for the time being

Still got plenty in stock, So shouldn't be a problem.

Thanks:)

How do i pay you, am new to the forum

Via paypal, Send me a PM and I'll send you the details.

Cheers
Noel

How do i pm you, sorry for the stupidity, i have never really used a forum before, thanks, sorry, i can't get any money until the first so i will have to wait till then. Thanks

^^^^

click on my name then send a private message to cream.

you can see youe messages just below where it says Welcome, Sewey on the right hand side.
;)

The bad news is if everyone who's asked about payment for these actually sends payment I've run out.:thumbdown:
The good news is I should have some more finished by tomorrow :thumbsup:

thanks everyone for your ordered :wub



Don't really want to bump the thread again, So I'll jut edit this to add that they are now

BACK IN STOCK :thumbsup:

Hey I will be ordering a couple of this for us guys up in Canada were can I order can’t find your site.

Cheers

Den.

Sorry bud I don't have a site yet. If you PM me I'll send you all the details you need.

You can check out my feed back here
http://www.oople.com/forums/showthread.php?t=19612


cheers
Noel Grundy.

Ok thanks Noel I will PM you at the end of the week I am waiting on other to split the shipping charges.

Den.

CREAM WEIGHT
 

Got my cream weight today, quality item, good machining, thanks for the speedy shipping. Same applies to the rear Camber mod:thumbsup:

Cream parts well-arrived in france today !
excellent job !
Hope to try them quickly on my 22 !

Thanks a lot Noel !:lol::lol::lol::lol:

Don't forget if you have the losi rear weight on, Try removing it. Thank's for letting me know it has arrived.

do you ship to the states?? and if so how much would it be??


MAtt

Hi Matt,
Yes I do ship to the states, it is expencive though at £8.95 for signed for delivery.
I've had a few in the past split the cost with other club members wanting other parts.

Cheers
Noel

i am not familiar with the conversion from euro to us dollar, how do i order ...i am thinking the wt. and the camber link

thanks..
matt

Cheeky bump for this very popular mod.
;)

Currenty this item is out of stock, I'll post again when I've produced some more.
Regards
Noel Grundy

Would it be possible to make the mount longer so it could also attach to the chassis in the outside holes on the chassis (mid motor setup of course)?

I find it very difficult to change toein or antisquat and get all the parts lined up to reinstall. If the piece was fastened to the chassis with the outside holes it would make installation of the arms and toein block so much easier

I have considered drilling a hole in the stock piece between the existing holes and a corresponding hole in the chassis so it's fastened the same as the toein block with the smaller screw

Back in stock.....


Bob_Zahn there are other issues if I make them bigger to include the to outer holes for screwing, Currently the original shims can be used, If I made them to include the outer holes I'd need to produce shims as well, which would add greatly to the cost as the are all different thicknesses.

If people use the original shims on a redesigned wider weight they would either have screws coming loose or chassis bending.

will be ordering mine finaly :)

You have PM,

Cheers
Noel

Have sent you a PM Cream, to buy two.

sent you a pm.

Felipe.

Is this a new one Ie a mk2 ?

No this is as the original post, There is no MK2. There are cost/design issues with producing a weight that uses the outer holes in the chassis.

Hi, I have PM'ed you about getting one of these weights. Thanks...

Got my order today, thanks.

Got mine ready to run,

Unfortunately weather is not giving a rest to try.