oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Xtreme - VEGA (http://www.oople.com/forums/forumdisplay.php?f=15)
-   -   Predator XRS (http://www.oople.com/forums/showthread.php?t=9966)

ben 16-04-2008 07:06 PM

Quote:

Originally Posted by Mrs.TeamXtreme (Post 114806)
Cloned....I think so:p

Erm garry ^^^^^^^^.:bored:

Mrs.TeamXtreme 16-04-2008 07:11 PM

Quote:

Originally Posted by ben (Post 114811)
Hmm not sure if i can agree with you on this yanina. Because if atomic carbon had cloned the BJ4 worlds it would be in 3x3 cell layout. And it wouldnt have a slim chassis. :eh?:

Just my opinion.

Not their own parts, different chassis maybe. That's not original is it? Also have you ever agreed with us Ben?:lol:


Garry Driffill 16-04-2008 07:11 PM

The using of anouther compays parts / drivetrain and alike seems to be abit of a waste maybe the effort and time that goes into making the chasis and awsome carbon fibre products maybe in time we might see a full car from atomic carbon or anyother growing brands that are getting bigger all the time like X-Factory maybe too would be ace. But on the downside it costs an arm and a leg.

ben 16-04-2008 07:13 PM

ok now i know wot ya on about.:lol::p Course i agree with most of the stuff you say:thumbsup:

PaulRotheram 16-04-2008 07:42 PM

I think this situation of people jumping in threads, just to give a comment which is completely unessessary and not needed is getting out of hand, especially in the xtreme area.

I'd appreciate if people would cool it before further action is taken as i've seen nothing but complaints all week surrounding this topic.

Back on topic to the original thread please.

Cooper 16-04-2008 08:26 PM

Thanks Paul :)
I was getting annoyed reading all this yes-no crap :(


Tobbe, please let me know if you're intrested in an XRS car.
I have one with some spares and X10 rockers.
It has run 1 training and 1 race.


Yanina, did you look at my comments in my email from yesterday?

Co- team drivers, I've burned my fingers on my soldering iron so pic's from my car will be for tomorrow héhéhéhé...

Tom3012 16-04-2008 09:15 PM

awww cooper... u ok? :p i blew a soldering iron up not so long ago!!..


and Tobbe, coopers car will be mint, he's been a pred guy for ages :thumbsup:

rowanp25 17-04-2008 08:10 PM

why so defensive of the x11?? i know they have had probs in the past (weak gears ect) but thats been addressed. the x11 isnt anything "new" as such but an evolution of many years of perserverence. i still own an old p8 which i think is fantastic, reliable (ran same gears for a full season n still in good nick:thumbsup:) i think ppl will slate the x11 and drivers on its previous cars reputation but i dont think its a good idea to rise to it verbally. jus get it on the track n let this car speak for its self!! Btw i was accepted as a trade team driver like all the rest of team xtreme but now decided to back down, stick with me p8, n modify that (like a true pred driver used to) and maybe delve into something else where its not so petty. maybe 1/8 truggy at club level............yes that right ppl club level.

Tom3012 17-04-2008 08:13 PM

hi might, shame you turned it down! im defensive of the car because i am passionate for it and always have been, i waited for so long to own one, and now i do, some people slate it... that just gets to me, so i stand up for it :thumbsup:

tobbe 18-04-2008 07:16 PM

Hello Mates!

Good news good news! I just received a message from the Pred seller and the car is MINE:thumbsup:. I bought it for only 60€!!! Damn what a happy ending of the week! Can't wait to get it:lol:

jeff jenkins 19-04-2008 12:23 AM

congrats man.. hope you are happy with the car.:thumbsup:

tobbe 19-04-2008 06:36 AM

Yep me too! For just 60€ it's a steal!:thumbsup:

Tom3012 19-04-2008 12:29 PM

Bargain!!!!! im 100% sure you wont be disappointed! congrats! :thumbsup:

tobbe 21-04-2008 06:51 PM

Yep:thumbsup:. The car was sent today, and hopefully it'll be here tomorrow! I will post some pics of it when I get it;)

Garry Driffill 21-04-2008 07:24 PM

Awsome man :lol:. Glad to hear its worked out for you :D

Garry

tobbe 24-04-2008 12:02 PM

I got the car yesterday and damn it looks nice! But it need some new parts to get driveable like a front gearbox top, some front wheels (I just got 7 rear wheels), rear wing mount, some screws and diff balls and maybe a new outdrive because the former owner had tighten the diff to hard so the diff screw had broken and got stuck inside the outdrive and it's impossible to get it out without ruining the outdrive:(. But for 60€ I'm happy with the car. I got an extra set of arms, front & rear hubs and some other stuff:).

For the diff, would these balls fit?

Jaad Racing 3mm Diff Ball Set
The original ones are 1/8 inch so it's just a 0.1mm difference, is it too much? And the optional ceramic one cost a lot more than these...:bored:

Jaad Racing Thrust Bearing

Tom3012 24-04-2008 02:46 PM

Quote:

Originally Posted by tobbe (Post 117318)
I got the car yesterday and damn it looks nice! But it need some new parts to get driveable like a front gearbox top, some front wheels (I just got 7 rear wheels), rear wing mount, some screws and diff balls and maybe a new outdrive because the former owner had tighten the diff to hard so the diff screw had broken and got stuck inside the outdrive and it's impossible to get it out without ruining the outdrive:(. But for 60€ I'm happy with the car. I got an extra set of arms, front & rear hubs and some other stuff:).

For the diff, would these balls fit?

Jaad Racing 3mm Diff Ball Set
The original ones are 1/8 inch so it's just a 0.1mm difference, is it too much? And the optional ceramic one cost a lot more than these...:bored:

Jaad Racing Thrust Bearing

id stick with the team xtreme diff balls myself, if you buy those and they dont fit, its money wasted... for your wing mounts, buy the X11 ones, much stronger!

hope you get it running soon!!! :thumbsup:

Mrs.TeamXtreme 24-04-2008 05:00 PM

Hi tobbe

If you want set-ups or advice etc you will find these on www.the-pred.co.uk a website just dedicated to the Pred.

Welcome to the Pred:thumbsup:

col300 24-04-2008 05:53 PM

Quote:

Originally Posted by tobbe (Post 117318)
For the diff, would these balls fit?

Jaad Racing 3mm Diff Ball Set
The original ones are 1/8 inch so it's just a 0.1mm difference, is it too much? And the optional ceramic one cost a lot more than these...:bored:

Jaad Racing Thrust Bearing

i got a load of 1/8" chrome diff balls if your struggling.
£2.50 for 20 plus postage (Not sure how much it'll be to Finland)

Also got 2mm thrust balls £1.20 for 12 plus postage

Will also have the ceramic 2mm soon too £5 for 12 plus postage

tobbe 27-04-2008 01:08 PM

Thanks but no thanks. I've already ordered some chrome diff balls for my Pred. Still need some screws, front gearbox top and a wing mount to finish it:)


All times are GMT. The time now is 04:28 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com