oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   S-Workz (http://www.oople.com/forums/forumdisplay.php?f=225)
-   -   Show Off Your S104 EK1 (http://www.oople.com/forums/showthread.php?t=136441)

rcpower 16-01-2014 09:20 PM

3 Attachment(s)
I have build a fresh kit, for my son, in which I have put the esc behind the servo(low-profile). It should be better than on top of the servo.

I will be mounting the receiver in the back of the car. You can neatly wire the leads under the lipo's as they don't sit flat on the alu chassis ;-)

rcpower 20-01-2014 10:47 AM

1 Attachment(s)
She's all done now: without body she comes in at 1734gr. and the left to reight weight ratio is exactly 50% when the PT is installed :-D
Shocks with cut bladders and yokomo high grade o-rings, f***** fantastic! Some titanium turnbuckles and Jconcepts ballends are still waiting to be assembled...

Dean Washington 25-01-2014 09:36 AM

Mine finally done, thanks to Peter from answer rc for hooking me up. Need to get smaller esc, getting the speed passion gt 2.0 in wasn't easy.

http://i602.photobucket.com/albums/t...psa703b535.jpg
http://i602.photobucket.com/albums/t...pse2b41fbd.jpg
http://i602.photobucket.com/albums/t...ps5c0d855b.jpg

rcpower 25-01-2014 11:27 AM

I like the foam tires, how did you do it? I assume you bought 1/8 scale foams on tires and acetoned them down and glued them again.... Correct?

Dean Washington 25-01-2014 12:19 PM

Quote:

Originally Posted by rcpower (Post 832796)
I like the foam tires, how did you do it? I assume you bought 1/8 scale foams on tires and acetoned them down and glued them again.... Correct?

No just bought 1/8 foams and put then straight on, both my local clubs uses foam for tyres

toddzellia 25-01-2014 12:24 PM

NICE !! paint job...........:thumbsup:

rcpower 25-01-2014 01:16 PM

Which foams? Which shop? Have been looking earlier into this, but without success so far(or I might have been looking in the wrong places).

Quote:

Originally Posted by Dean Washington (Post 832803)
No just bought 1/8 foams and put then straight on, both my local clubs uses foam for tyres


Dean Washington 25-01-2014 04:07 PM

http://www.racing-cars.com/sp/catego...ar_Donuts.html

Any of them depending on shore, used to used enneti donut foams which I think are a lot better, but since rc direct shut down havnt been able to find them anywhere :thumbdown:

andy110m 28-01-2014 08:50 PM

You going to be running that beast at Ribble on Friday Dean?

Dean Washington 29-01-2014 05:21 AM

Hopefully, depends what time i finish work

jokersat 28-03-2014 10:22 AM

video from top rc greece.........
https://www.youtube.com/watch?v=jVLakjHadrk

guinness 08-04-2014 01:23 PM

So the only place for the ESC on this car is on top of the servo ?

orinoco 08-04-2014 02:20 PM

Unless you are going to use a low-pro servo. In that case you may be lucky and fit it in behind the servo depending on which speedo you are going to use. There is an upgrade kit coming out very soon which moves the cells and motor/spur assy nearer the rear of the car, which should allow the speedo to be mounted behind the servo and shift more weight to the rear for balance. This upgrade kit will also allow the use of a shorty battery on one side of the chassis with the motor mounted behind the spur assy which will free up a lot of space at the front and again change the balance and dynamics of the car. Im not sure if all new cars will come with the new chassis or if it will only be available as a tuning option.

s22jgs 09-04-2014 09:36 AM

tuning option I believe. But for £85 quid you get ALOT!

Welshy40 03-07-2014 12:22 PM

Weslhy40's SWorkz
 
4 Attachment(s)
Ok, well I decided to get one seeing as they went rather well at Maritime over the winter season. Havent used it yet but hope you like what I have. :thumbsup:

rcpower 28-08-2014 04:54 PM

items sold


All times are GMT. The time now is 02:53 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com