Here you go :-)

Shannow
What speedo have you got under that shell..is there plenty of room for fans?
From the pics it looks good from underneath as its a nice tight fit ,better than my proline RB5 shell.
I recently tried a Kyosho RB5 sword shell which was also a nice fit.

Thanks shannow, seems perfect fit ! If I had to buy a shell, I'll choose this one, or the Jconcept one...

I have seen you have the ezrun motor, do you have the ezrun esc too ?

Yep I use a 60Amp Ezrun ESC with a 5.5 6000 motor - This is pretty new for me (only raced once with this setup) but ran well and stayed cool using a 19 tooth pinion - I'm racing at Bury this weekend so that'll be a good test for it.

I've got the fan on the ESC and it does fit without any problems if it is on it's side.

Ok, I have the same esc, but with the 8.5T motor, running with the 21T pignion (86T spur)
I put the fan on the side because it touched the shell. No cooling problem.

http://img.over-blog.com/600x450/1/9...6/SDC10090.JPG

Have you got replacement shocks on there Kedal, or just springs?

I've not really had any issues with the stock shocks despite hearing all the problems about the tops popping off etc, but I did find it a bit of a swine to control on a bumpy section of track last time at Bury - I've messed around with the suspension settings quite a bit since so hopefully it'll be better this time around but I was considering getting some Associated shocks.

A 5.5 in a 2wd.....thats gotta be crazy!! I hope the traction was really good!
Keep us informed on the ez run esc. Do you get what you pay for or.......
Theres a new one called X-erun or something? Sposed to be new+improved.

shannow : It's not the original shocks, it's the Losi shocks, soooo good :)
See my little blog for some pics :

http://rctouch.over-blog.com/

notme : the ezrun is really good, no problem with it for now.
The Xerun is a little different, and sensored. The Ezrun is sensorless.

Notme: I ran with the punch set to a minimum and had no probs on a really small (but grippy) twisty track - biggest issue was slowing down for the corners! This is my first brushless setup so I don't know enough to compare to other manufacturers - it ran faultlessly though and very smooth. Looking forward to racing at Bury this weekend and having enough space to let her rip :-)

Kedal: Wow, very soft shocks (look great!) and stock tyres! I'm guessing it was a pretty low grip surface you were running on.

shannow : the socks aren't that soft, it's only for the picture :) (losi oil grad 30 on it, and standard springs) I ran on a wet ground, high grip surface, no problem with the car, really stick to the ground.
I don't have other tyres, for now, the stock tyres are enough :)

Fresh paint.




http://i14.photobucket.com/albums/a3...cture043-1.jpg
http://i14.photobucket.com/albums/a3...cture049-1.jpg
http://i14.photobucket.com/albums/a3...cture049-1.jpg
http://i14.photobucket.com/albums/a3...cture051-1.jpg

Very nice Rob !

Very Nice indeed Rob! ... I've just got my shell for my Rat, can't wait to start painting her :D

J

thanks bro.

kaylon throw up some pics when u get it!!

4 charges in and nothing broken.. yet (apart from wing)
Rear tyres needed!!!

Nice paint !
What wheels it is ?

Looks like jcconcepts rulux

As you can see, I took my fan off!!
Didn't think of the whole side ways thing!!

what motor is in it a 10.5?

4800kv sensorless xcelorin (100A).
Runs very well now I have my gearing sorted (down to a 16t)
Do you think my esc will be ok running fanless?

I have an LRP AI pro (150A) and 9.5t sensored combo on its way too.

My lipos are quite good, they're cheap Chinese ones.
4500mah 25c = 110A
3600mah 25c = 90A ish

I'm making up for the hours I spent running a hornet with mech s/c and dead batteries!!! :)

should be fine mate i would think its only 2wd after all

Here is my TQRacing SX10

http://pages.videotron.ca/jaunerc/sx10-4.jpg
http://pages.videotron.ca/jaunerc/sx10-1.jpg
http://pages.videotron.ca/jaunerc/sx10-2.jpg
http://pages.videotron.ca/jaunerc/sx10-3.jpg

Can't see you getting much traction with those wheels mate :)
Nice shox tho!

Damit..I was about to post that :P...

K

Well..here it is. Still have to change my turnbuckles to the new blue titanuim ones I'm waiting for but she's about finished.

Nothing fancy with the paint..just 2 tone metallic blue and red with a pearlescence finish..all my cars share the same theme :)

From Foreground to background...

Madrat.

Maverick Atom XB.

Losi Micro T with Beetle shell.

Cat toys from Christmas.

http://img189.imageshack.us/img189/8352/sdc10336l.jpg

J

Nice setup.

My Buggy

http://www4.pic-upload.de/25.02.10/eo49wlm9cumc.jpg

matt black rat
 

I did not like the prepainted shell, so I ratted it! :thumbsup:

http://mitglied.multimania.de/lanserspage/DSC02420.jpg

http://mitglied.multimania.de/lanserspage/DSC02421.jpg

http://mitglied.multimania.de/lanserspage/DSC02415.jpg

Sweet alloy...very smart indeed :)

J

Exit NiMh cell, welcome Lipo's !!

http://img.over-blog.com/600x450/1/9...6/SDC10269.JPG

http://img.photobucket.com/albums/v4...h/DSC01695.jpg

http://img.photobucket.com/albums/v4...h/DSC01697.jpg

Nice shell notme !

Very nice Notme, very nice indeed...do you mind if I use that idea/design as a base for my new shell ?

J

Sure, by all means. Thanks for the comments.

These are mine n Max's temporary shells - painted on the outside to cover up the pre-painted Mad Rat shells; When I get a couple of clear shells I will attempt proper paint jobs on the inside:

Nice paint jobs all round. What shocks are those?

Thay are nice JezT, especially for paint overs...

Oh and farmboy..I think they are these shocks

They are not bad for budget alloy shocks.

J

Yep - They are Ansmann - Had one pair that leaked, solved this by replacing the pistons and O rings from the kit plastic shocks (very slightly tighter).

As Kaylon said - ok for budget shocks