oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Xtreme - VEGA (http://www.oople.com/forums/forumdisplay.php?f=15)
-   -   Considering a VEGA which base is best? (http://www.oople.com/forums/showthread.php?t=77896)

/tobys 12-09-2011 08:15 PM

Here you go mate

http://www.teamxtreme.co.uk/store/in...roducts_id=393

:thumbsup:

spenner 12-09-2011 08:16 PM

Quote:

Originally Posted by The Chef (Post 553076)
Just ordered one. It said that the B4.1 is out of stock so I guess that the RB5 version would say out of stock.

Not saying they are or are not in stock but why would the RB5 be out of stock if the B4.1 one is ??

Just out of interest ?

Pedros20 12-09-2011 08:22 PM

Vega
 
Quote:

Originally Posted by /tobys (Post 553086)

Cheers Toby.
Thought they where only available from Inside Line racing.:thumbsup:

InsideLineModels 12-09-2011 08:54 PM

Quote:

Originally Posted by Pedros20 (Post 553089)
Cheers Toby.
Thought they where only available from Inside Line racing.:thumbsup:

We will have stock soon! :)

The Chef 12-09-2011 10:41 PM

Quote:

Originally Posted by spenner (Post 553088)
Not saying they are or are not in stock but why would the RB5 be out of stock if the B4.1 one is ??

Just out of interest ?

That's not what I ment. I was saying that the site says when an item is out of stock as it is saying the B4. is out of stock, implying that there was no note on the RB5 so I guess they have stock.

Hope that helps.

K:thumbsup:

spenner 13-09-2011 06:37 AM

As clear as day now... :)

The Chef 13-09-2011 05:17 PM

Hope it will arrive tomorrow.:)

The Chef 13-09-2011 06:58 PM

Ok so the VEGA will be here tomorrow I hope, I only have the stock RB5 SP2 car will I need any other hop ups? I ordered the Machined Idler gear from Team-X but is there anything else that I need?

reg 13-09-2011 07:20 PM

i would get the wide rear rear ali hinge pin holder and the rear front,i think insideracing has them both:thumbsup:

The Chef 13-09-2011 08:19 PM

Cool thank you, anything else?

SimonW 13-09-2011 08:24 PM

+1 degree Alloy hubs or if you can't afford/find them try the plastic 0.5 deg hubs they will get you running.

The Chef 13-09-2011 08:26 PM

Front or rear?

reg 13-09-2011 08:38 PM

the rear chef..........what do they do to help?

Piman 13-09-2011 08:46 PM

Try the standard 0 deg hubs first. You may not need to spend that much on the extra hubs as a number of people are moving from 1 deg back to the standard hubs.

James

The Chef 13-09-2011 10:11 PM

Quote:

Originally Posted by reg (Post 553552)
the rear chef..........what do they do to help?

Yes what do they do? Make the car less twitchy?

tomtom 13-09-2011 11:05 PM

I have bought all three of them (0, 0.5 and 1), only use 0 now, mostly on astro but 0.5 might come handy in low grip. 1 barely useful.

The wider front hinge pin is nice too and I put alloy washers in place of plastic shims.

Don't forget the Rudebits 92g ESC weight, very much needed and maybe a 60g or so for underlipo weight if bumpy.

Check the Vega forum part, I write a little how-to on that build, mostly tips from Kevin or Matt.

Adam F 14-09-2011 12:01 PM

I use the 1 degree rear hubs on low grip surfaces, they work well..

The Chef 17-09-2011 05:53 PM

Got the Vega, Super quick delivery:D:D:D

Rebelrc 18-09-2011 11:44 AM

Cool!
Is it nice?:)

reg 18-09-2011 12:29 PM

I run the RB5 SP2,the vega is the best car iv ever run,iv been running mine indoor on carpet for 3 weeks,i ran it at the the f3,4,5 out door,all i changed was the wheel base,had i not been told by the man on the mic how well i was doing i would have been in the top 10:woot:..........im just starting to push the car and it just eats up what you throw at it,im still running the kit RB5 springs and just a bit of lead under the speedo,i dont know who said they are no good in the wet,mine was awsome,but then i did have a L**I 22 :woot:


All times are GMT. The time now is 08:58 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com