oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Associated (http://www.oople.com/forums/forumdisplay.php?f=24)
-   -   spur b4 (http://www.oople.com/forums/showthread.php?t=31942)

bigred5765 13-10-2009 09:15 AM

SWITCH THE TRANSMITTER TO SERVO REVERSE, IT SOUNDS LIKE WHAT I SAID ABOVE IS RIGHT THERE ARE NO BRAKES IN REVERSE,

stampede vxlboy 13-10-2009 05:43 PM

if i do that it will turn the wrong way

bigred5765 13-10-2009 05:55 PM

u can do it just on the throttle,

stampede vxlboy 13-10-2009 06:09 PM

i had decide to sell it i have seen something else i want.
its running fine now does it make the car slower if the grass is wet?

jhammond 13-10-2009 06:21 PM

Wet grass increases the drag, so yes, it would slow anything moving through it.

Why are you selling it if it's working fine? I assume it's working again because you listened to "bigred5765" and it was the throttle inverse that solved it?



Julius.

stampede vxlboy 13-10-2009 06:26 PM

no it was not the handset set its coz of the power of the motor

Timee80 13-10-2009 06:29 PM

sounded to me like it was just a loose slipper and this would also cause the noisey spur.

jim76 13-10-2009 07:09 PM

so you get a new car, set it up wrong, ask loads and loads of questions, possibly get it going ok, then decide to sell it.

why oh why does anyone bother to help you?! just get your next car from a shop, ask them for help so they can show you first hand.

jhammond 13-10-2009 07:11 PM

I'm in agreement.

This chap seems to pollute this forum with unnecessary topics; most of which have been heavily covered before.

Col 13-10-2009 09:36 PM

Quote:

Originally Posted by stampede vxlboy (Post 298052)
no it was not the handset set its coz of the power of the motor

Bullshit. I know a lad who tried a 3.5 in a b4 for a laugh. It stopped as well as anything alse I've ever seen.

stampede vxlboy 14-10-2009 08:56 PM

i have just tryed my mamba castler esc in it and it 10 times fast and the brakes work fast as hell but when you start of it start squrals when setting off i am not selling it know keeping it

sparrow.2 14-10-2009 09:14 PM

Quote:

Originally Posted by stampede vxlboy (Post 298486)
i have just tryed my mamba castler esc in it and it 10 times fast and the brakes work fast as hell but when you start of it start squrals when setting off i am not selling it know keeping it


It squeals because you've built it wrong / your diff is still fooked

stampede vxlboy 14-10-2009 09:17 PM

why it fine with the ezrun but not as power full mambacastle
i have look on the manual and its how i did it

stampede vxlboy 14-10-2009 09:21 PM

could it be that the diff it too tight or the slipper is too tight

jim76 14-10-2009 09:25 PM

TAKE IT TO A SHOP OR CLUB!

sparrow.2 14-10-2009 09:26 PM

Quote:

Originally Posted by stampede vxlboy (Post 298503)
could it be that the diff it too tight or the slipper is too tight

Diffs and slippers only squeal if they are too loose.

Build both according to the manual using associated diff grease for the big balls and associated black grease for the thrust bearing (the little balls)

You can then even plop in a 3.5 turn and it won't squeal...

stampede vxlboy 14-10-2009 09:27 PM

i have took it to a shop the said it was down to the power its when you set off only

sparrow.2 14-10-2009 09:29 PM

Mate I've run a 4.5turn on carpet and driven it like a berk for fun and there wasn't the slightest sqeak from the gearbox. They are tough as nails!

stampede vxlboy 14-10-2009 09:30 PM

its fine with ezrun but not the mamba i would like to use the mamba as it is hell of alot faster

ashleyb4 14-10-2009 09:33 PM

More than likely you have a diff bearing out of line inside or its to loose. Or your slipper is to loose or your spur gear is melted or your slipper pads are melted.

A


All times are GMT. The time now is 04:41 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com