We'll see ;);)

Ooooh! Don't keep us in suspense! :woot:

P.S; I got your message - maybe I should have explained that I'm looking for NIP or un-used parts ;)

Think I might know;)

I Know you do...;)

My special part New in packet Cougar 2 Works chassis !!!!!!
 

So here it is,

I have managed to get hens teeth......:thumbsup: Yes its a new Cougar 2 Works chassis in packet.

I would like to Thank CATS for this very special one off part.

New Cougar 2 Works parts !!!!!!!!!!
 

So after getting a New Cougar 2 Works chassis in packet, I have also been able to gain the following new in packet parts for the Cougar 2 Works, including a mod we used to do on the front wheels. This was called a 2WD Twin Track Mod this was 2 bearings in the hub rather than just the standard 1. This would prevent the wheels from play/wobble with the aid of the double bearings.Shown in last picture.

Mmmmmmmmmm very nice:drool::drool::drool::drool:

Bugger! guess I'm looking for some longer hinge pins now! any idea on part numbers? I got the brace, cheers Moozo!

Very nice - well Jealous!:D (especially of your chassis)

I've got the twin bearing mod on my Works - really helps take out the slop in the front wheels :)

What is this twin bearing mod?

Didn't a lot of people use RC10 caster blocks, steering arms and wheels back in the day?

G

Thinks its the 44m ones you need mate....u1425

http://www.ebay.co.uk/itm/Schumacher...-/251228699902

Hi Northy,

Yes that was something else that was done 25 degree cast with hubs RC10 off the Team car.with RC10 wheels....... But also the 2WD Twin track was used.

Its basically 2 bearings in the front hub, When I start the build I will high light this part so all can see.

There's still one of these mods out there, but its a bit pricey

http://www.acornmodels.co.nz/product...c-spares/3506/

Nice! The right parts are all still around (at the RIGHT price that is).

Twin bearing mod Vs standard - the bearing mod also widens the track slightly.

http://img.photobucket.com/albums/v2...DSC00145-2.jpg

Works vs Team shock towers !!!!!!
 

After some careful examination of the shock towers between the Works and Team plus new carbon towers of fybre lyte reproductions there is a few changes between them.

The Team rear tower has 6 holes for shock positions.
The Works rear tower has 5,,,,, 3 at bottom and 2 at the top, also the cut shape of the Works rear tower is different to the Team.

Fybre Lyte make carbon towers but these are the Team versions. Do you know if they make the Works version of the rear tower. Have any of you had them made...... as they only show one type of tower on the site (Team).

Parts !!!!!!!
 

Hi all,

Just a little update. Some of the bits I was waiting for have turn up today so I will be starting the build shortly.:D

I am still waiting on a few little bits but this wont stop the build. :thumbsup:

Parts ready for the build !!!!!!!!!!!!!
 

All parts ready to start build tomorrow.

New parts in packets are,

Chassis :D
Rear Works wishbones.
Rear Works hubs.
Rear Works bulkhead.
Rear Works hinge pin blocks.
Rear Works outer hinge pins.
Rear Works inner hinge pins.

And the original Works carbon fybre rear tower. Cant wait to start this......:D

Click to enlarge.......

I don't even like carrot's c'mon already:p:p

C.

Have you thought about contacting schumacher about parts??