Fredrik 503 diff protector and 503 & 201XMW chassi protector arrived yesterday, SUPER FAST!!!
503 chassi protector and 503 diff protector fits perfectly!! I love it!!
My 201XMW kit arrived this monday and it is in the box, not assembled yet (I need time!).

Hope Fredrik make a version of the 503 shock towers!! :thumbsup::thumbsup:


Best regards

what combo of spur and pads are u using guys?it seams that 91t spurs are only the tamy ones.

diff/belt cover arrived a couples of days ago ,fit nicely.
regarding the rear top plate i haven't had any problem with it at moment,but i know that the TRF TEAM did breake it too.

after three club meetings,crashed few times at the end of the straight because i couldn't apply breaks due to slipping belts and the car seems solid.
http://i102.photobucket.com/albums/m...pszttjf1ly.jpg
http://i102.photobucket.com/albums/m...pssmeqhfz9.jpghttp://i102.photobucket.com/albums/m...pswcspszhi.jpghttp://i102.photobucket.com/albums/m...psov8p1orr.jpg

Fredriks covers look great:thumbsup:

Now if he could just hurry up with the carbon fiber goodies he is doing:D

i would like a spur gear cover :thumbsup:

Quick Question:
What parts have people use to convert the front Hexs to 12mm? or Do you all just order 10mm Wheels to suit?

I was told that the Team C's 12mm hex is a direct fit.

finally had a chance to run my car, over 2 months after taking delivery of it. :bored:
ran it in an indoor carpet track. (i was going to get diff covers to run outside but since the indoor track opened up, i just couldn't pass up the opportunity).
Still box stock set-up.
- ran went, jumped well. no breakages. :)

stoked.

car struggled with traction-rolling, even after i installed the rear sway bar. (was using Proline Pinpoint F & R)

i'm thinking of going to stiffer springs too.
any other suggestions?

also looking to get some o-rings for the diffs. the rear diff appears to be leaking a tad.

2.5mm top decks
 

2.5mm top decks can be pre ordered now.

https://www.facebook.com/SepesRacing..._type=bookmark

I hope that either Fredrik or somebody gets the carbon fiber upper and lower decks done soon:cry:

I need to try e-mailing Sepes again for the upper decks...:bored:

Spine Weight for 503. 40g sits between lipos using existing screw holes in the chassis.

Available from: http://thumbsdesigns.com/product/tam...-spine-weight/
International shipping available.

Top Decks and shock towers will be available soon... :thumbsup:

Traction rolling ???in what situation?upload your setup sheet.

Hello,

Question. I´m from Austria and look for a diff and belt cover for the 503.
And the incrased upper decks. Front and rear.

I have send fredrik an email and i also send him a parts order question at Facebook. But no anser. Where can i buy this things now. I hope you can help me.

best regards from Austria

Hannes

Nice idea on the weight ... I wonder if it replaces the inner battery holders since it's a little wide:woot:

have you tried sending a pm in this forum?he was on 3hours ago.

yeah you just unscrew the inner lipo stays. Will see if can get a picture up of it in the car. Also have the drawings of the top decks and battery braces on the site now with shock towers going up shortly with a pre order option. Prices will be as competitive as we can make um!

http://thumbsdesigns.com/product-cat...ts/tamiya-503/

TRF 503
 

Thought I'd put a couple of pictures of my 503 on here, well chuffed with the build, & awesome paint by Tel at Telsshells!

http://i467.photobucket.com/albums/r...psxfds6ecw.jpg

http://i467.photobucket.com/albums/r...psisznbwal.jpg

http://i467.photobucket.com/albums/r...psoj5styvu.jpg

Paint job looks bad ass!!!:woot:

Nice... How thick are the towers going to be???... Hope the front on is at least 4mm maybe a bit thicker:wub
Also what is the thickness on the top decks as well ..?? 2.5mm or 3mm :drool:

towers are 3.5mm and top deck 2.5mm

pics of the weight in the 503 are now on the website. :)

Thanks:)