Hi,

Just finished getting my 22 ready, looking forward to getting it on track now.

Been reading this thread and it has helped a lot so thanks to all for the wiring ideas, hop up suggestions and set ups etc.

What do you think? Its a first draft, would like to shorten a the servo and receiver wires etc, but for now i'm happy with it :)

Hope the pics attahced ok....

Cheers
Chris

Tidy

Hi chris
Give us all an update as to how the 22 drives an jumps with the battery so far forward.

Cheers:thumbsup:

Cheers, will do.

Although the LiPo is fully forward its just replacing the space where the electrics would have been and vice versa, I don't think i've upset the balance by doing this...only track time will tell i suppose!

I am running the cream weight behind the motor (approx 48g over standard item i think), and i'm contemplating running some under the electrics to further aid rear end, but will see how it goes as is. How much weight have people added and where to?

Actually What's the BRCA weigt for 2WD these days??

This is mine from Madrid:
http://img641.imageshack.us/img641/1...6140443.th.jpg
http://img641.imageshack.us/img641/1...0106140443.jpg


Rear motor mount for asto circuit, the best for my local track ;);)

I only run 20g on the back end while indoor racing and that suits me but that might not be enough for other people :confused:
Not sure on BRCA weight as im just a club racer :woot:

My 22
 

http://i1048.photobucket.com/albums/...9/SDC11468.jpg

http://i1048.photobucket.com/albums/...9/SDC11469.jpg
http://i1048.photobucket.com/albums/...9/SDC11468.jpg
http://i1048.photobucket.com/albums/...9/SDC11466.jpg

Shell painted by matt coleman
:thumbsup:

http://i1258.photobucket.com/albums/...h/DSC_0433.jpg

All ya have to do is copy and paste the img code into a post HTH

My 22's
 

I can never decide which motor or tyres to run so I bought 2....

Here are a couple pics of my 22 with Team Bluegroove body and wing. You can find them available on Ebay by searching Team Bluegroove. It is called the PC-22 body.

That's a nice looking shell there Bob:thumbsup:

Are the side pods higher then the kit shell for those of us who's cells are the wrong way round?

Thanks for the feedback. I really like it too!!

The shell has much more room just about everywhere including over the side pods

I build mine the same way but my Esc is a little bigger so the lipo comes more to the front.
I started running it with stickpacks in it, and the only change i found was that it doesn´t flip over that fast as the cg comes down a lot.

It jumps just as the stick one =)
I like it that way!

Thanks for the info Till i might just have to try this set up when we are back outdoor racing on hi-grip astro.

Cheers

Meet the twins!
 

http://farm8.staticflickr.com/7196/6...0fbb80c3_b.jpg
http://farm8.staticflickr.com/7184/6...4f3013da_b.jpg
http://farm8.staticflickr.com/7203/6...a148351e_b.jpg

Jconcepts Finnisher body

Sloth, what rear tires are those ?
Part numbers if possible, Thanks!

Schuey yellow mini spike 2 I imagine.

Heres mine on Foams :)
http://i52.photobucket.com/albums/g3...r/IMAG0240.jpg