Yeah do them myself on a Brother P-Touch 9500PC printer.

Cheers,
James.

Finished the SV2 yesterday.

http://a8.sphotos.ak.fbcdn.net/hphot...73445543_n.jpg

Next: fitting the electronics Hobbywing 120A and SP 7.5T

found it thanks
braddaz

done
 

Ready To Race

Just can't get over that rear turnbuckle as a brace. Does the old stffener bolt up? Looks like battery swap is a pain.

The original top deck on the SV was bolted on, or used body clips. The soft top deck option wasn't.

The SV2 can also be changed to just use a pin to hold the lipos in place but to be fair it only takes 30 seconds to do it.

The turn buckle brace is the way many cars seem to be going these days, and the car handles like a dream so it seems to be a good progression

Battery change is fine. The front pin comes out and then you can lift the top deck up. The only real pain is undoing the four screws on the top that hold the top deck in place.

http://i82.photobucket.com/albums/j2...G_00000035.jpg

http://i82.photobucket.com/albums/j2...G_00000037.jpg

http://i82.photobucket.com/albums/j2...G_00000038.jpg

http://i82.photobucket.com/albums/j2...G_00000039.jpg

^^^no photos coming up on mine?? just 3 question marks

Will sort it when I get home.

Earlier today I was comparing the flex of the SV2 and the 8mm SV with the skinny top deck.

The SV2 is a LOT stiffer, but very noticeably, the flex is in a totally different place - just in front of the motor, rather than roughly in the middle of the car as of the SV.

This makes sense with 2wd, flex at the rear to generate more grip.

The turnbuckle makes sense as it allows side to side flex, but not front to rear.

Can't wait to run it this Sunday!

it also doesnt have to be bolted up take a look you can use body clips for quick release if you wish,

Looking for a 2wd and I am really impressed with this the SV2. Tempted to make the jump. What are Schumacher like on parts, servicing etc?

they best service department ever they are so on the ball

agreed, never anything but superb service.

You wont find better customer service and parts back up in the UK. FACT.

Well looks like I am sold on the SV2. Saddle Lipos only by the looks of it though. Bit annoying considering I only have stick ones.

You can buy a stick pack conversion for it,:thumbsup:

http://www.racing-cars.com/pp/New_Ca...SV2/U4047.html

lets have a look at your lovely shell:wub

OK, just for you!!


http://img809.imageshack.us/img809/9307/photocoujpg.jpg
http://img17.imageshack.us/img17/940/photocou3.jpg

:wub

Ah that is good thing; saves a few quid not having to buy more lipos.

I will give the shop a ring and get one of these ordered.

That's a great shell :thumbsup: :wub

But it looks like you made the hole for the aeriel by shooting it with an air rifle :lol::lol:

:woot::woot: Yeah it does, It's tape that I used to stop it getting scratched but I haven't cleaned it up...it looks better now:thumbsup:

has any one tried to fit durango 14mm hexs to the rear of a sv2

Looks good mate, have you run it yet?

Nice paint chris!

Hi,

No I haven't run it yet:thumbdown: I took it for a test run at a local club who run an open night but the speedo packed up!! so it has no speedo in it at the moment:thumbdown:

I have both the speed passions in stock at the minute. The lpf comes in at £89.00, the new ones coming out shortly.

I thought I would post a picture of my cougar sv2 because I have not seen a pic on here set up to take stick lipos. all I need to do now is get someone to spray my shell :woot:


Attachment 35942

I don't know why the pic is upside down?:confused:

bloody hell thats got some grip:woot:

Good superglue to keep it on ceiling :thumbsup:

and that's with out the rear wing :thumbsup:

Did you take it with an iphone4?? there is some sort of error in the camera software so the best way to take a picture is to make sure the volume buttons at the bottom then it will be the right way round:thumbsup:

yeah I did. thanks for the tip lol

can you have the body shell on the the speedpassion/hobbywing speedo? seems to have some overhang of the chassis

yes as the body shell is wider than the chassis, I put the under tray on first to make sure it all fitted lol, I have to be honest thou it its a little snug :woot:

Just got anodised bits back..... :thumbsup:

does that make it faster?:lol: