Aweeeeeesome!
Close to the perfect ride....

That is one fantastic looking car!! :thumbsup:

Edit: What battery posts are those?

Hello, I just saw at once the opportunity to order carbon top deck for FS2.
Is it possible to order now? :blush:

thank you for keep me informed via email: [email protected]

:thumbsup:

Just want to say thanks Nick, fantastic Quality & built well :thumbsup:

All fitted & ready to go just need to find the time to run it now :cry:

So has anyone ran there cars yet with this new top deck ?

I know this weekend is Worksop know doubt that's where some of you guys may notice the deck but just wondered if anyone ran them yet prior?

So wish was racing this weekend but one of those things moment :cry:

I ran my car for the first time with them and it was ace! :thumbsup:

Had couple of good runs, car got better with every run.. rd4 needed it to be my best run to get in the B....But the pin fell out of the freshley anodised front shaft prop shaft :( gutted.. qual C6 finshed 3rd or 4th i think.

Set up has changed quite a bit from where i ended up with using just the LAW chassis stiffner at the last round of worksop at the beginning of the year..

:thumbsup:

Here we go... Matt Carbon Fibre Battery Braces

Compliment the top decks perfectly..

I will have both top decks and braces with me at Worksop tomorrow 6/11/11

More products to follow from

Carbon Black RC

:thumbsup:

So you did get some done in the end lol :thumbsup:

Keep set for me treacle see you tomorrow

Hi Nick,how much are the parts now with the battery braces aswell?



Cheers,Phill:thumbsup:

looks great m8 your car is stunning

Top decks fitted to mine :thumbsup:

Very nice , hows the weather back home?

Ran the Carbon Black RC top decks this past weekend - AWESOME!! A great addition to an already fantastic car :thumbsup:

do these carbon parts stiffen or give more chassis flex?
W.

they stiffen the car

Blingtastic

Hey Nick
 

Hello Nick!

I really like this parts...I have a question thought

I was checking your car and in this picture I see in the rear arms that in the rear side you have some spacers screwed. Why is that? Any performance gains?

http://www.oople.com/forums/attachme...1&d=1317158428

The spacers help transfer the load through the arm evenly in the event of an impact thus lessening the chance of braking the arm across the thinner webs in that area.

Since doing this I've not damaged an arm even in the biggest accident.

I believe it makes the arm a little stiffer too.

Good point Gayo, I am sure it does.

after first using my car this weekend it felt a bit numb had a word with nic fitted top deck changed front camber link and the difference was night and day better!:thumbsup:
The car was more positive and a lot quicker to respond also felt to give me a lot better feed back not vauge like before.

just to work on my set up a bit more thanks again nic for pointing me in the right direction.

And which is the right direction setup wise with the carbon upper decks?

what surface u racing on?

Mostly dirt but we also have two indoor tracks, one with low traction concrete and one with carpet..

Nick, can you supply us SP users with sexy Olive anodised rear hubs and 3 racing shock mounts at all?

Tried the carbon top decks off Nick yesterday at worksop after the first two rounds,made the back end come in line better and made the car a lot more drivable for me. Definate improvement on the handling. Can't wait to run it again now:thumbsup:

Yup, another big thumbs up for Nick's top decks. Ran my FS2 at the West Coast Scottish Open and it was fantastic. :thumbsup:

Cheers for the feed back folks :thumbsup:

Should have some more in stock to sell by the end of the week... sold 4 sets at Worksop on Sunday..

I have battery braces available if anyone is interested :)

As for anodising.. yes i can get it done no problem..

Best thing, as i did, is do a job lot.. i even had the 1mm, 2mm, 3mm spacers and they came out really well. Also had the shock cartridges done and these were fine also and these have a very fine thread..

Turn round on getting the anodising done would be about a week.

Cheers

Nick
:thumbsup:

Please PM me the price for the set of the upper deck. i left u a PM too

Thanks

Regards
calvin

The top decks are 40 pounds. If you purchase the battery straps aswell I think its about 57 pounds. Can't say how much postage will be if you live outside the uk.:thumbsup:

Got my decks and straps through the post today, I have to say the quality is superb, love the matt finish to it - really tasty! They went on with no problems at all and I'm looking forward to seeing the difference they make this weekend on the carpet. What's the camber link change you ran with them then?

cheers Nick :)

ad.

Adam mate, leave the car as is for practice then we will work out what to do from there.

Show the nice boys & girls a picture Adam, don't be shy.


Mine arrived too but sadly it will be a few weeks before I get my new car to bolt them yoo :(

There's still love for Kyosho blue out there ;)

Adam,

thanks for posting that up ... reminds me that I will have to change my ESC connection routing in order to be able to use this top deck!
Best start working out how I'm going to do that!!!

Looking good there Adam :thumbsup:

Get the Lazer ready for Sunday Roger.. you know you want too!!

I have 3 sets of decks left out of my latest batch.. so anyone who is interested...dont delay

:thumbsup: