Here you go mate

http://www.teamxtreme.co.uk/store/in...roducts_id=393

:thumbsup:

Not saying they are or are not in stock but why would the RB5 be out of stock if the B4.1 one is ??

Just out of interest ?

Vega
 

Cheers Toby.
Thought they where only available from Inside Line racing.:thumbsup:

We will have stock soon! :)

That's not what I ment. I was saying that the site says when an item is out of stock as it is saying the B4. is out of stock, implying that there was no note on the RB5 so I guess they have stock.

Hope that helps.

K:thumbsup:

As clear as day now... :)

Hope it will arrive tomorrow.:)

Ok so the VEGA will be here tomorrow I hope, I only have the stock RB5 SP2 car will I need any other hop ups? I ordered the Machined Idler gear from Team-X but is there anything else that I need?

i would get the wide rear rear ali hinge pin holder and the rear front,i think insideracing has them both:thumbsup:

Cool thank you, anything else?

+1 degree Alloy hubs or if you can't afford/find them try the plastic 0.5 deg hubs they will get you running.

Front or rear?

the rear chef..........what do they do to help?

Try the standard 0 deg hubs first. You may not need to spend that much on the extra hubs as a number of people are moving from 1 deg back to the standard hubs.

James

Yes what do they do? Make the car less twitchy?

I have bought all three of them (0, 0.5 and 1), only use 0 now, mostly on astro but 0.5 might come handy in low grip. 1 barely useful.

The wider front hinge pin is nice too and I put alloy washers in place of plastic shims.

Don't forget the Rudebits 92g ESC weight, very much needed and maybe a 60g or so for underlipo weight if bumpy.

Check the Vega forum part, I write a little how-to on that build, mostly tips from Kevin or Matt.

I use the 1 degree rear hubs on low grip surfaces, they work well..

Got the Vega, Super quick delivery:D:D:D

Cool!
Is it nice?:)

I run the RB5 SP2,the vega is the best car iv ever run,iv been running mine indoor on carpet for 3 weeks,i ran it at the the f3,4,5 out door,all i changed was the wheel base,had i not been told by the man on the mic how well i was doing i would have been in the top 10:woot:..........im just starting to push the car and it just eats up what you throw at it,im still running the kit RB5 springs and just a bit of lead under the speedo,i dont know who said they are no good in the wet,mine was awsome,but then i did have a L**I 22 :woot:

Hey reg
How does you vega stack up against the 22?
I think some of my mates that have 22's are quite jealous of how good my vega is.
Mine feels like it begs me to push harder lol

:thumbsup:.......

I just found that for me,and from watching on track yesterday with changable conditions,the 22 was inconsistant,hard to push and most of the ones i watched seem to double bounce on landings off the jumps,not a big issue,but a few jumps ment you landed on the corner,so when pushing the car rolled over as they turned

the vega however,its just a joy to drive,i just know there is more to come as iv only ran it 5 times,im already nearly 2 laps quicker:thumbsup:....

I'll let you know on sunday. I've not run it yet.:thumbsup:

With the help of Kev Lee I got mine finished today and gave it a dozen or so laps practice. It felt better than my B44.1 has ever felt and that's had months of tinkering with it. The Vega was just faster though, it carried more speed into the corners, was more stable, jumped great, I loved it. I can't wait to race it now! :thumbsup:

Painted it today.:p
http://i15.photobucket.com/albums/a3...s/P1050549.jpg


I would still like a FROG. Come on guys get it together.