|
Damn...you're using all my RC10T parts..! 😂
|
Quote:
|
RPM 91 w0RldS Front End.
4 Attachment(s)
RPM 91 w0RldS Front End fitted. The front screw is longer on the right, this will allow for the body mounting post to fit on top of the steering bellcranks.
Nose tubes require the mod to fit in to the RC10T Bulkhead. Once the Yellow A & L steering turns up I will fit it and show. CLICK TO ENLARGE PICTURES... |
Looking good!! Some nice rare parts on this build
|
A & L Steering...
2 Attachment(s)
A & L yellow steering turned up today.......:thumbsup:
I will be fitting these later with LUNSFORD 7 turnbuckles and RPM Ball ends.... CLICK TO ENLARGE PICTURES...... |
Will you race it when finished ? loving the build ! Awesome
|
Thank you Nige55,
Yes it will be run/raced......:thumbsup: |
A & L Steering...
5 Attachment(s)
A & L Steering fitted, LUNSFORD 7 turnbuckles and RPM Ball ends.
New castor blocks and steering arms fitted. Just need to make alterations to the nose tubes, then install, then the front body post to install on top of the bellcrank..... Ive fitted a 2nd battery cup with them cut down to allow for the REEDY shorty. I have fitted them to allow for the foam spacer to fit forward and back...... CLICK TO ENLARGE PICTURES......:thumbsup: |
VTS Slipper
2 Attachment(s)
So just a small up date.
VTS Slipper fitted to the Original STEALTH gearbox with RDRP Vented front pad and Associated drilled rear pad.. HYDRA-DRIVE Gear cover on the way from America....:) Front shock mount screws and bushings ready for the Associated BIG BORES.. CLICK TO ENLARGE PICTURE.... |
Looks awesome. :thumbsup:
|
Gorgeous. Absolutely perfect build with all the best bits. Love it. There's something about that slipper and vented pad that's just lush on a stealth 'boxed RC10.
|
Cheers Lads.......:thumbsup:
So I have made a little change. I have removed the LUNSFORD 7 turnbuckles and have fitted the TECHNACRAFT turnbuckles instead. I just prefer these. I have now completed the mod to the nose tubes and fitted. Ive messed around for a few hours with the BIG BORES, Different Bodies, shafts and internal spacers to get the up-travel and droop I wanted on the Front.... I have also fitted RC10 Worlds rear hubs and bearings to allow for the RC10 B3 axles to allow me to run the Original Proline and Associated Wide body wheels. I have also fitted the RPM rear shock tower. I wasn't going to use it, I was going to fit a standard RC10 Team rear tower. But hey !!! its fitted.....:thumbsup: Pictures coming now !!!!!!!!!!!!! |
That slipper nut looks tight..! ..and what are those scratches on the motor plate...!...😂......still looks great though..👏
|
5 Attachment(s)
Here you go.....
CLICK TO ENLARGE...........:thumbsup: |
Quote:
The slipper nut looks tight, but the spring sits a good way into the RDRP outer plate. I was thinking once its set trimming the shaft down to neaten it up a little, but will leave it till I have power through it and ran it. The anodising is rub marks from use. When the motors fitted and gear cover is on you wont see it............:) This is my runner Aire. The one I will be building for the shelf hasn't any scratches or marks.......:D:thumbsup::thumbsup::thumbsup: |
Not just one..but two like that..!..👏👏.. I don't believe it...! :thumbsup:
|
:thumbsup::thumbsup::lol::lol::lol::lol::thumbsup: :thumbsup:
|
HYDRA-DRIVE Gear Cover RC10.
2 Attachment(s)
So the Team Losi HYDRA-DRIVE Gear Cover for the RC10 STEALTH Gearbox came today.
It will cover the VTS perfectly while still giving the Vintage look.....:) Cut out ready to mount........:thumbsup: CLICK TO ENLARGE PICTURES......:thumbsup: |
Fitted.
3 Attachment(s)
HYDRA-DRIVE Gear Cover fitted. Also the gearbox brace and rear body mount fitted.....
Perfect fit.........:) CLICK TO ENLARGE...... |
Shocks
So after purchasing some B5M shocks on here, that actually were B6 shocks :lol::lol:, Ive now managed to sort them out.
The front BIG BORES are B6 rears with B6 front shock shafts. The rear BIG BORES are now B5M bodies with B6 rear shafts etc.... They are now fitted to the RPM RC10 91 worlds and just waiting for the wing tubes to turn up. So almost there with the build. I have the B3 wide body pro-line original wheels to fit. I will sort pictures tomorrow of the above up-dates...........:thumbsup: |
Big Bores fitted
7 Attachment(s)
Team Associated big bores fitted front and back. Just waiting on wing tubes, then the wing can be mounted. Wheels and tyres ready to fit. Like I said in a previous post, I have fitted B3 CVDs and Axles. Allows for slightly more droop and the B3 range of wheels...
Then its electrics to fit. I will go for a brushless motor and ESC. Looking around 10.5 - 9.5 maybe. I also have REEDY shorties so all good........:thumbsup: CLICK TO ENLARGE PICTURES...... |
Wheels & Tyres/ Shortie Fitted...
6 Attachment(s)
A couple of pictures showing the new indoor EOS tyre choice for this year.:D
Think the fronts will work well without any removal of the spikes...:lol: Rears (TR32s) were for me, the ultimate tyre on damp/wet grass back in the day.. REEDY shortie fitted. Ive cut down the cups to allow for the shortie to move forward and backwards....... CLICK TO ENLARGE PICTURES....... |
Even by your standards...that is superb Mark..!..👏👍
|
Quote:
Just an up-date. Still awaiting the wing tubes. As soon as they are here I will be able to complete the build.......:thumbsup: |
Is it finished yet Mark....? What about the bodyshell..?
Just asking as you appear to have started another Tamiya..! 😱.... Alan.. |
Quote:
Not finished yet. I purchased some wing tubes from Germany that the seller never had and tried to take my money....:mad: Lucky I paid via paypal and had to make a claim to get money back, which I got back yesterday.........:thumbsup: I have managed to gain some from a nice oopler who has sent them, so just waiting for them to turn up, then I can finish it........:thumbsup: |
absolutley fantastic mate, cant wait to see it bodied up with the paint, well done mate you dont half turn a car out as ive said many a time.
|
I think the most important thing to highlight in this thread is I want to see proof that he really is 5 Metres Speed Swimming Champion 1976
|
Quote:
|
Quote:
Man of many skills Dazza........ Ive still got my verruca sock my mum sent me with back then. Never figured out why it was only one though.........:confused: :thumbsup::thumbsup: |
Because you only had a verruca on one foot...! 😂😂
|
Quote:
That's it Alan.............:thumbsup: |
So had the wing tubes turn up today.
A BIG thank you to Brett for helping me out........:thumbsup: I will try to fit over the weekend along with the wing and get the finished picture up.........:thumbsup::thumbsup: |
Body and Wing fitted...
5 Attachment(s)
After a little polish of the wing tubes. They are fitted along with the wing wire, wing buttons and wing.
Body mounted along with Dart rears and Mini spike fronts. Just the electrics to fit and then the track.........:thumbsup: CLICK TO ENLARGE.... |
Looks great, think it need more stickers!!:D
|
Quote:
Cheers Marko..... |
Simply Stunning mate!!
|
Looks good mate, brings back good memories. Give me a shout if you want someone to drive it for you :p :thumbsup:
|
Brilliant Mark...👏👏....not only are you the top builder ( and sourcer of parts.! ) but also a top class painter..👍
When you decide to sell it and move on to your next project , probably in a few weeks time, let me know..! 😂.... |
Quote:
It does look good with all my parts on :cry: don’t suppose you’ve got a spare rear tower have you? |
| All times are GMT. The time now is 06:26 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com