The motor cables looks short, can you change to RM without soldering :confused:

hey,
i love the car, but only if you take off the body!
Can somone make an afterproduction body for this car!! to carry on the nice look of the car to the body.

Whattt the body is a work of art...

Hey guys
eyeayen's work is excellent, if you get your shell done with him you wont be dissapointed :thumbsup:
Couple of pics of the build :D

Looking good! Suggestion... Can you swap steering arms around, that way you could flip servo and have the wire coming out of it on the other side. Looks like it can be done.

I dont see why not :)

Why would you want too ? other than changing the position of the servo would it give any other setup option's ? :)

Sorry I don't want to derail this thread - I did do graphic designery type things. I charge about what everyone else charges for a shell, between £20 and £40 depending on number of colours and complexity of design. I've got a few in at the moment for RC Lazy.com so watch my thread - the imaginatively titled paint-by-ian over the next few weeks to see what I've been up to ;)

So the servo wire could come out on the side your receiver will sit. Not having to run the wire across behind the servo then. It's only a thought;)

There's an arial hole on either side griff. ;)

mines done! just needs setting up and raced :D

http://i242.photobucket.com/albums/f...0/DSCN0114.jpg

http://i242.photobucket.com/albums/f...0/DSCN0117.jpg

Can check out my build blog if you want HERE

http://img839.imageshack.us/img839/1351/img0492cs.jpg
http://img338.imageshack.us/img338/5720/img0493qf.jpg
http://img580.imageshack.us/img580/6034/img0501xn.jpg

Excuse the phone pictures. Very good to build, see how it goes at Taplow tonight.

Gainsy you forgot your rear bumper :D

Personally I was working from the manual rather than the revisited online manual and thought that's a bit weird having countersunk screws there


------

here's mine.
I'm not a fan of the gold/yellow washers so planned ahead with the red hehe. didn't' realise I'd need so many to do the wheelbase adjustment though!

iphone photos look terrible. rushed this morning before work. I only finished the car at 2.30 this morning lol

http://i937.photobucket.com/albums/a...vt/RC/210a.jpg


http://i937.photobucket.com/albums/a...vt/RC/210b.jpg


http://i937.photobucket.com/albums/a...vt/RC/210c.jpg


http://i937.photobucket.com/albums/a...vt/RC/210d.jpg

Hi Chris. Looks really nice. Shell looks neat.
Not finished mine yet as some minor bits missing. Hopefully be rolling soon.
Let me know how it goes tonight.

thinking about it if you swapped the steering arms over on the rack you could probably turn the servo over and run the wire out the opposite side to be more tidy...

I notice some guys are putting there speedo on the same side as the motor tabs........ Any reason for this apart from keeping the wires short!

Big G,is the pic of the rear,it looks like the right camberlink ball cup is bent already,or is it just the way they are designed?.......looks nice thought,

Aran, be good to see it go mate:thumbsup:

Reg, I think it's the angle of the photo. the ball cup is bent anyway. the left side is the same, but looks straight in the pic

you can also use to 90mm sensor wire that I personally have loads of rather than having to buy a slightly longer one.

I'm going to run mine with the speedo on the left (looking at the front)

Keeps the wires tidy, on the orca speedo, the wire comes out of the speedo and straight across the chassis.
I will check the balance of the car from left to right and add weights as necessary.