oOple.com Forums
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)
-   1/18th & Micro stuff (http://www.oople.com/forums/forumdisplay.php?f=36)
-   -   Whats needed for 1/18th racing!!!! HELP! (http://www.oople.com/forums/showthread.php?t=53290)

Jonesy 13-09-2010 10:35 PM
Quote:
Originally Posted by matdodd (Post 413385)
Jonesy did you put me in for the first one?

Just sent you a text dood

matdodd 13-09-2010 10:38 PM
Thanks Mate

Checa 14-09-2010 03:33 PM
Quote:
Originally Posted by Jonesy (Post 412608)
Last point, you will not need an 8.5 Novak, way way way too quick!

8.5 is awesome :thumbsup:

danmurphy 16-09-2010 01:18 PM
Quote:
Originally Posted by Jonesy (Post 412608)
Last point, you will not need an 8.5 Novak, way way way too quick!
EPOR doesn't have much of a straight. I was quick with the 13.5 mongoose. Only recently started using the 10.5 there, probably because jonesy was beating me!
:woot:

Jonesy 16-09-2010 01:21 PM
Quote:
Originally Posted by danmurphy (Post 414291)
EPOR doesn't have much of a straight. I was quick with the 13.5 mongoose. Only recently started using the 10.5 there, probably because jonesy was beating me!
:woot:

You need to move to Sensorless mate! So much smoother! :thumbsup:

rondoolaa 18-09-2010 08:17 PM
novak 8.5
 
i bought a novak mongoose 8.5 sealed on ebay for 46 pounds, its for use in my shark sc, i run a 3vcs handset, can i slow down my 8.5 via the handset so its the same speed as the 10.5

mrspeedy 18-09-2010 09:53 PM
You can if you have end-point adjustment, just turn it down until it feels how you want it too :thumbsup:

rondoolaa 21-09-2010 10:33 PM
thanks
 
will do, thanks mrspeedy

danmurphy 22-09-2010 08:18 PM
Quote:
Originally Posted by Jonesy (Post 414292)
You need to move to Sensorless mate! So much smoother! :thumbsup:
How can they be smoother? I may have to invest in one to find out what I'm missing!
Andy is yours a SPE11MS69 BL Motor for 1-18 - 6900kv ?
Where did you get your 2mm 10T pinion for the shark?

sticky 22-09-2010 08:36 PM
Quote:
Originally Posted by danmurphy (Post 416308)
How can they be smoother? I may have to invest in one to find out what I'm missing!
Andy is yours a SPE11MS69 BL Motor for 1-18 - 6900kv ?
Where did you get your 2mm 10T pinion for the shark?
Is that the same motor that Andy cooked a couple of weeks ago :p

Jonesy 22-09-2010 09:56 PM
Quote:
Originally Posted by sticky (Post 416323)
Is that the same motor that Andy cooked a couple of weeks ago :p

Alright I've got 3 of them, I forgot to put a fan on it, leave me alone!

Dan, yes it is mate. In terms of the pinion I'm sure I got it from Steve Webb's in Frodsham :thumbsup:

craig.w 27-09-2010 11:19 AM
I have everything u need
 
If you look on ebay i've got a Ftx Blaze 1/18 brushless
with lipo and intellect 1400 mah(just as quick as the lipo)
my name on ebay is allsorts459 .Its at £59.99 and i think there are 15 watchers with 1 or 2 days left.If you live in yorkshire your welcome to come have a look.Its almost identical to the lrp shark,i upgraded loads of bits(alloy).Next thing the local club in Earlseaton which was having weekly 1/18 or fortnighly shut and i was gutted .So if you want to have a look i think mine is the only one on unless one has been listed since last night.Anyway if you like it ring me 01274 872206,we can sell out of ebay and save buyer,seller fees......Look forward to hearing from you ..Craig

gazhillAE 27-09-2010 06:55 PM
Quote:
Originally Posted by danmurphy (Post 416308)
How can they be smoother? I may have to invest in one to find out what I'm missing!
Andy is yours a SPE11MS69 BL Motor for 1-18 - 6900kv ?
Where did you get your 2mm 10T pinion for the shark?
Ditto!
I have drove your car jonesy and my own and mine is way smoother!!!!
Big up the Sensors!!!!!
:thumbsup:

gerbil 27-09-2010 07:09 PM
well after completly cooking the insides of my mongoose motor
ive moved to senserless ezruns and being completly honest felt just as smooth when i got my transmitter sorted ha ha
so im staying with senserless

metalmickey0 27-09-2010 07:26 PM
What is the `hard case `rule i`ve been reading abuot.:confused: Sounds rubbish to me. Rather see my lipos expand than have them suddenly explode with the pressure

Jonesy 27-09-2010 08:34 PM
Quote:
Originally Posted by metalmickey0 (Post 417962)
What is the `hard case `rule i`ve been reading abuot.:confused: Sounds rubbish to me. Rather see my lipos expand than have them suddenly explode with the pressure

There is no Hard Casr regulation in place in the BRCA Micro National Series.

The only place I know that is running a rule such as this is Southport Indoors and this is a club decided rule

soane 27-09-2010 09:15 PM
I've just watched a video posted on the Ellesmere Port website and it appears that some of the cars are lading flat from the big double at the back of the track, what sort of abuse can these take? There are a couple of FTX's on ebay and they look like good fun :thumbsup:

Jonesy 27-09-2010 10:00 PM
As long as you're not hitting the corner of the wall (which I've managed before :blush:) then you'll be ok. I find they are so resilliant and take punishment very well!

bindy 05-10-2010 05:05 PM
HELP WANTED
 
hi thinking of doing some of the nationals i have a couple of losi mini t are these still allowed and what motors and batterys can you use hope somone can help me cheers lee


All times are GMT. The time now is 11:51 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com