oOple.com Forums

oOple.com Forums (http://www.oople.com/forums/index.php)
-   KYOSHO (http://www.oople.com/forums/forumdisplay.php?f=10)
-   -   MP9 (http://www.oople.com/forums/showthread.php?t=40765)

colreid 10-03-2010 01:05 PM

Spring Rates
 
Hi Chris, In simplistic terms, spring rates/colours are as follows:-

long hard
IF348-916 9-1,6,L95 red
IF348-1016 10-1,6,L96 dark blue
IF348-1014 10-1,4, L95 light blue
IF348-1116 11-1,6,L95 lime green
IF348-1114 11-1,4, L95 dark green
IF348-1216 12-1,6,L95 purple
IF348-1316 13-1,6,L97 white
soft

medium hard
IS106-816 8-1,6,L84 dark blue
IS106-814 8-1,4,L84 light blue
IS106-916 9-1,6,L84 lime green
IS106-914 9-1,4,L84 dark green
IS106-1016 10-1,6,L84 purple
IS106-1116 11-1,6,L84 white
soft

short hard
IF350-716 7-1,6,L70 dark blue
IF350-714 7-1,4, L70 light blue
IF350-816 8-1,6,L70 lime green
IF350-814 8-1,4, L70 dark green
IF350-916 9-1,6,L70 purple
IF350-1016 10-1,6,L70 white
soft
__________________

Hope that helps you out a bit, I believe you can run the long springs in the rear using the medium setup; and it results in a slightly softer rate in comparison. I've not had chance to try this out personally though.

Fingers crossed I should be pitting with Rob at Stoke on the 28th,:thumbsup: and I've got a most of the above springs; you're more than welcome to try some out, just give me a nudge.

Colin

Chrislong 10-03-2010 01:26 PM

Thats brilliant, cheers Colin! I'll print that out and acetate it to my pitbox :thumbsup:. it will be good to meet more MP9 drivers :thumbsup:. 28th march? okay I think im being pursuaded, its an NNRC meeting too that day ya'see, I'll see if Mahoonaburger and Brennan fancy it too.

Cree, I know Rob is using the lightweight chassis. Share some details and photos mate, im interested. I didn't know about it before Rob mentioned it. Are you doing any other MP9 stuff?

njc11 10-03-2010 01:28 PM

Quote:

Originally Posted by rich_cree (Post 353224)
What you all need is a nice extra lightweight chassis! ;)

Go on... tell us more?

rich_cree 10-03-2010 01:59 PM

If anyone wants a chassis doing then just email me and I'll sort it out. Basically i'll take your std MP9 chassis and mill pockets in it to lighten it out and add a bit of flex (all for a very reasonable fee....)

Click on the logo below for more details and email me if you want to know more!

carlin 10-03-2010 02:11 PM

Quote:

Originally Posted by rich_cree (Post 353224)
What you all need is a nice extra lightweight chassis! ;)

Oh yeah need little bit of lighter chassis too.
Found the car so much better, cheers Rich.

Might send it over to you for little bit more flex ;)

steelie600 10-03-2010 02:19 PM

Quote:

Originally Posted by Chrislong (Post 353237)
Thats brilliant, cheers Colin! I'll print that out and acetate it to my pitbox :thumbsup:. it will be good to meet more MP9 drivers :thumbsup:. 28th march? okay I think im being pursuaded, its an NNRC meeting too that day ya'see, I'll see if Mahoonaburger and Brennan fancy it too.

Cree, I know Rob is using the lightweight chassis. Share some details and photos mate, im interested. I didn't know about it before Rob mentioned it. Are you doing any other MP9 stuff?


Nope NNRC is the 21st!!!!

ryanlownie 10-03-2010 02:28 PM

And then it's Bury on the 28th.

Chrislong 10-03-2010 02:48 PM

Ok done, NNRC 21st, then Stoke 28th...

ryanlownie 10-03-2010 02:49 PM

We still swapping for a round Chris? ;)

Chrislong 10-03-2010 03:18 PM

For a round? Nope :blush:, but you can try it for a few laps in practice.

Like the new signature Ry, I need mine re-doing *hint hint*


All times are GMT. The time now is 07:30 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com