Thanks guys

My Durango 410R TORCH setup from Sunday 5th Sep 2010 is at the bottom of this post:

http://rclazy.com/2010/09/10/team-du...t-term-review/

hi n thanks ..this will help me sort mine

Here's a link to the set up I ran last weekend (9/1/20) on the Ansmann XPro.

http://mrmagoo-rc.blogspot.com/2011/...for-torch.html

Another decent Durango DEX410R setup for TORCH

http://rclazy.com/blog/2011/03/21/du...o-go-at-torch/

Anything on the B4.1 guys :thumbsup:

Please note the setups posted in 2010 were for the OLD track

I ran my Cougar at TORCH for the 1st time last weekend and ended up the highest placed Cougar. I will post a full setup when I return from holiday but will list the main points for you below.

Shocks, front. 5 hole pistons 35WT oil 4.5 spring.
Rear. 5 hole pistons 30WT oil 2.5 spring.

Tyres, stagger rib fronts. Yellow mini spike rear.
-2.0 Deg camber front and back.
Front wishbones reversed, medium wheel base setting (try running in long wheel base to start with).

As I say when I return from holiday I will post a full setup sheet.

Feel free to PM me any questions,
James.

What setups are people using on the new track? Shall we get this thread lively again?

22 setup?

Setup is used on ansmann mad monkey. Best so far 11laps 310.5

Front tyre yellow stagger on cut down monkey wheel. No insert.
Shocks. Ansmann xpro alloy body. 2 hole piston. 20wt oil.
Spring. Xpro black(feel very similar to team c hard spring -red)
Mounting - top inner hole on tower , bottom inner hole on wishbone.
Camber -2 degrees
Top link - inner hole on tower. Outer hole on c hub.
5mm between collar and end of shock body

Rear tyre yellow minispike blue insert on STD rat rear wheels
Shocks as above 25 wt oil
Spring as above
Mounting tower inner wbone outer
Camber -2 degrees
Top link inner top outer top outside
6mm pre load on spring.

50 grams lead on servo

Basically kit settings other than shocks and weight.

Hi all

just need a little help i'm going to run my madrat this sunday at torch and need a little help with gearing

cheers Ginge

I run 21t pinion with the standard spur - 6.5 motor.

cheers mate

6.5:o i'm going to be running 13.5 maybe stick a 10.5 in, looks like i'm going to be at the back of the pack :woot: but never mind i'm still going to have a giggle:thumbsup::thumbsup:

Ginge

Mad Rat set up etc
 

Hello all.
This is my first post on this site and new to RC cars and/or my 6 year old son.
A couple of weeks ago you was kind enough to let my son on the track after racing had finished, he had a great time didn't crash too much, the car is standard as it came out the box. The car had tyres issues.
My first question is can you recommend tyres ( front and back) suitable for this surface/track someone did mention Schumacher yellow or blue would these be mini spike?
my 2nd question I tried to set the car up as per the manufactures instruction but I have been told the car is not set up right (not enough toe in) I would be grateful is you can give me a rough guide of what is a good basic set up (if there is such thing a basic setup) toe-in/out camber angle, spring setting, diff , clutch etc. etc. I have seen a set up for a x-pro car but didn’t give information on toe settings
Thank you in advance for any help you can offer
Ian

Check this thred out it will explain all, mini spike yellow rear and staggered slim Schumacher front. My advise would be to get down to torch and ask people this is what I done when I started they are really helpfull and its all about trial and error!!!!!
http://www.oople.com/forums/forumdisplay.php?f=81

My setup from Last sunday If anyone is interested!

In the morning when it was a touch damp I ran Dboots Multibite's (B) compound on rear, then went to Schu Yellows after round 2 I think...

DEX210:

http://i237.photobucket.com/albums/f...tupSheet-1.jpg

anyone fancy sharing their set up for a sx3 please ??:confused:

Front:
30wt AE oil, Losi Silver spring, 4 hole piston
7.5 deg front yokes
10 deg front rake
middle hole on wishbone, middle hole on shock tower
1.4 front rollbar
front track washers = 0.5mm rear, 1mm front
1mm washer under front inner ballstud
-2 camber

Rear
25wt AE oil, Losi White spring, 5 hole ghea piston
3 deg toe in
centre hole on rear hub carrier, 4mm washers under inner ballstud
Long Wheelbase
1.2 rollbar
low pivot pin
outer hole on wishbone, inner hole on shock tower
-2 camber
18mm ride height
:thumbsup:

thank you very much rob shall see you down the track in a few weeks after I've got the last round of chippenham out the way :thumbsup: