as i said if thats right the only thing is something on the b4 is slipping, get someone that knows what there on about to look at it

That's it, between this thread and the other one about your brakes not working you haven't listened to what people are telling you neither have you described the problem or even been able to answer to peoples questions properly.

Your Speedo could do with resetting and your B4 could do with a proper rebuild by someone who knows what he's doing or by following the manual. End of story!

Headbutting stuff is fun than trying to help you http://www.rcweb.de/forum/images/smi...lie_ohmann.gif

Stampy, take it to your local model shop and ask them to look at it. Stop posting questions unless
a - you can state the problems clearly
b - you action the advice given to you

some things are far easier to solve in the flesh than trying to describe them. Either go to a shop, or a local club and the experienced racers will be able to SHOW you what is wrong and TEACH you how to do it correctly.

I think people will give up answering your threads soon because as Sparrow says it is like headbutting a wall.

i have done everything he as said and what other meber have said i took the diff out re set it up and it still the same . all that to do now is set the esc up and handset . how much do you tighten the diff up . it had no grease init at all . how many turn back from full tighed diff to set it right ?thanks guy s

go to the associated website and download a manual, read it yourself instead of asking all the time.

google is a wonderful thing.

if you can't figure it out after having located and read a manual then feel free to ask a correctly phrased question

sorted the diff out . as it was not working right so just need to reset esc and handset hopefully its down to handset and esc thanks for all your time guys :thumbsup:

it runs ok but i am going to reset the esc to the handset and start again thanks guys for all your help :thumbsup: