oOple.com Forums - Original RC10 Worlds Klein/RPM 91

oOple.com Forums (http://www.oople.com/forums/index.php)

- Vintage RC (http://www.oople.com/forums/forumdisplay.php?f=48)

- - Original RC10 Worlds Klein/RPM 91 (http://www.oople.com/forums/showthread.php?t=201773)

:drool::drool::drool:

That is one good looking car

mvh iso

Quote:

Originally Posted by xfactor (Post 1006120)

Hi all,

Just thought I would share some updates to my RC10.

Now complete with,

NIX 91 Front Low Tower.
This allows for the B3 Front Shocks or the B5/B6/B6.1 Front Big Bores.

KASHIMA Fox coated Big Bores with Jconcepts Adjusters.

Full RPM 91 Worlds front end and rear end.

MIP Shiny Driveshafts

I also changed the electrics around to neaten it up a little. Ready to be given its first run tomorrow weather dependant, then on to my next project....

CLICK TO ENLARGE PICTURES...

Is this not for sale yet?

:lol::lol::lol::lol:

No its not for sale.....:thumbsup:

I gave it a run out Saturday at Coventry track. I was surprised how good it was to be honest. Just needs a little weight up front.....:thumbsup:

Really does look great Mark...👍..... Having run RC10's for years, I'm not too sure about shorty Lipos to be honest. They seem too light to me.....it seems to handle better with full length lipo...imo..

That is a fantastic build, could you list the parts you used for the front and rear hubs. I'm building one also but I'm not sure what parts to use on the hubs. Also I'm a bit lost with shocks.. I'm using a fibre lyte Truck rear tower and worlds replica front tower. I have B44 CVDs.

Quote:

Originally Posted by nicefrog (Post 1006803)

Hi nicefrog, thank you for your comment,

REAR.

Original RPM RC10T hubs
Original RPM Large Bearing Set for 3/16 axles
Jconcepts 12mm Hex

FRONT.

RC10 B4.2 30 degree castor
RC10 B4.2 Front axle
RC10 B4.2 Front steering arm
RC10 B4.2 Front 12mm hex

All very hard to find, but most are on Ebay…… Hope that helps....

Quote:

Originally Posted by nicefrog (Post 1006803)

Shocks,

I do have a set in the for sale that came off a RPM 91 Worlds, but are blue alloy with blue alloy tops.

Front,

Big bore you would need b6 rear body with b6 front shaft. This allows for the intermediate shock you need for the RPM 91 Tower.

Small bore is intermediate for the RPM Tower, but if it has the hole a little lower, its for the .89 B3 front shock.

Rear,

The truck tower is no different in height to the buggy. The truck has a longer shock due to the travel to the wishbone (further out). So the rear buggy shock is no problem on the truck tower on the buggy ( I used to run it)

For BIG BORE, You will need a set of B5/B5M shocks.... Hope that helps...:thumbsup:

Thanks Xfactor, This helps me out a lot :). I'll start hunting those B4 parts and have a think about the shocks

Just to add that for the front B4.2 axles JConcepts also do a part that's probably easier to find. Also, the AE parts are sometimes listed as SC10 parts, just to further confuse matters!

Quote:

Originally Posted by revol (Post 1006907)

Just to add that for the front B4.2 axles JConcepts also do a part that's probably easier to find. Also, the AE parts are sometimes listed as SC10 parts, just to further confuse matters!

Thanks for the SC10 hint, also I did end up finding a pair of the Associated hex axles here in Australia.. Wasn't easy but they are on the way. The parts I don't have is probably less than the parts I do have now. I need the alloy hex mounts and shocks, some linkages etc.