Had a graphite stealth back in the day , loved it .

RC10 GRAPHITE UPDATES !!!!
 

So all parts cleaned ready for install. I was lucky enough to find a complete front end.

White wishbones, front hangers,front casters,front spindles,axles and hinge pins. Once stripped and cleaned have came up like new with no marks. I fitted new ballstuds,nuts,E-clips, new graphite black tower, white shock bushings and foamy things.:thumbsup:

Note the first Edition red slipper, new and never used.:woot: Diff showing driveshaft stopper washers installed.

Click to enlarge.

RC10 Graphite.
 

I was sorting out my new screws ready for the build and noticed there are 3 different styles of the same screw.

Here are the 3 differences from the dark green re-release screws to the light gold original and noticed that the other screw has a single raised dot next to the cross.

The first screw has the raised dot at approx 11.00 o'clock on a clock.. Sorry for poor picture.

Click to enlarge......

Fitting to the Graphite Chassis
 

So I started the rebuild today. Following the manual its starts at the front of the Graphite. I was going with 3 washers under the post but will start with 2 until I have painted the body shell. So this is start..........:thumbsup:

Click to enlarge...

Looking good Mark, so your painting this shell then? Does that mean your going to keep it!!!!

You bet J,

This one is staying.:wub

😂😂😂😂😂😂😂😂 I'll believe that when I don't see it in the FS section :p

:lol::lol::lol::lol::lol::lol::lol: NO !!!!!

ive already bagged all his cars lol :p

I though you said that about your c2works :p

Lads Lads Lads,

hahahahahahahahahahaha please let me finish it first :thumbsup::thumbsup:

I have more to build/restore after this one also.

Gold tub WORLDS
B3 Factory Team restore
1 special one ?? ;)

RC10 Graphite.
 

Got to do a little more work on the Graphite. Pictures show rear wishbones, hinge pins and mounts cleaned. Rear bulkhead cleaned and fitted with new Wing posts, ballstuds, nuts and foamy things. Rear shock tower new graphite fitted with new screws,nuts,white shock bushings and white nylon shock nuts.

Starting to look like a RC10 Graphite now :D:D

Click to enlarge.....

Looking good so far! Itll be finished by dinner time!

RC10 Graphite.
 

hahahahahaha,

I waiting on other bits from America and France so could be at a stand still soon:wub Think the hardest parts Im stuggling to get is the 2 white nylon 8-32 nuts for the steering/servo saver cant find them anywhere :(

Just had the Rear drive shafts turn up though :D:D:D

RC10 Graphite.
 

I have managed to do a little more to the Graphite today. New battery holder, servo mounts fitted and also a bonus fined of a brand new original RC10 aerial tube YEAH BABY !!!!! :D:D

I will be starting the best gear box ever made tomorrow.... The Stealth Gear Box...... Still by today's standards this gear box in my opinion is the best ever made. Diff is second to none and the box can still handle the power of a 7.5. 25 yrs old WOW !!!!!

Click to enlarge....

So parts I am waiting for are as follows,

1980s Lunsford Ti 7s Turnbuckle set.
Associated Shocks Front and Rear Teflon Coated.
Rear flanged Bearings.
Front Wheels.

And I still cant find 2 8-32 white blasted NUTS !!!!!!!!!:yawn::yawn:

What front wheels do you need buddy? And I'll see what I can do about the nuts oooo errrrr 😉

Hi J,

All sorted for wheels matey. Im waiting on the above to turn up. Its just those blasted white 8-32s X2 of for the servo saver and steering:lol::lol:.

I'm no good with imperial sizes but welshy has a pack of 4 40 if they might do?

4-40 are for the front wheels and shock nuts. :( 8-32 are basically the imperial size for 4mm metric......