oOple.com Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)
-   I Made This ! (http://www.oople.com/forums/forumdisplay.php?f=25)
-   -   BJRC thumb screws (http://www.oople.com/forums/showthread.php?t=15766)

Tom3012 10-11-2008 07:35 PM
What about some shock bushing for losi shocks Ben? like the ones trinity did? Id buy a pair! Also, the B4 shock tower mounts, like the kfactory ones? they could sell well, specially if coupled with the DMS tower ;)

josh_smaxx 10-11-2008 07:49 PM
Quote:
Originally Posted by Tom3012 (Post 177362)
What about some shock bushing for losi shocks Ben? like the ones trinity did? Id buy a pair! Also, the B4 shock tower mounts, like the kfactory ones? they could sell well, specially if coupled with the DMS tower ;)
Shock bushings! :thumbsup: in steel as well i recon, wear better.

rcluke 10-11-2008 11:03 PM
Quote:
Originally Posted by DMS Racing (Post 177347)
The Associated blue alloy ones are £5.50..........not £3 :eh?:
i got mine for £3 - from americano ebay though

rcluke 10-11-2008 11:05 PM
Quote:
Originally Posted by ben (Post 177349)
Polished what? brass, steel, aluminium? Be a bit more specific! ¬_¬

Factory Team AS1787 Blue alloy battery strap thumbscrews (TC4, TC5, B44 or B4) £5.50

Taken from the DMS racing site, postage costs aswell? Might be £3 from america but i dont live in america!
polished brass would be good :thumbsup:

ben 10-11-2008 11:06 PM
The brass is basically polished. I did get the brasso out last night for the one's on my T4 :blush:

Lee 10-11-2008 11:15 PM
Benji,

Is this done on a milling machine or on a lathe, i may have a small project for one of my small mods;)

ben 10-11-2008 11:16 PM
Lathe :thumbsup: Got a milling machine aswell though :eh?:

Lee 10-11-2008 11:20 PM
i think it could be done on a lathe but may need a chassis milling too.

ben 10-11-2008 11:27 PM
pm me :D

rcluke 10-11-2008 11:41 PM
how much for a pair of polished brass ones then ben ?

ben 10-11-2008 11:46 PM
£4 :thumbsup: If you think how much work goes into them there are cheap lol

rcluke 11-11-2008 08:25 AM
put me down for a pair of brass ones when you get time ben :)

ben 11-11-2008 08:46 AM
Quote:
Originally Posted by rcluke (Post 177528)
put me down for a pair of brass ones when you get time ben :)
Your on the reserve list :eh?:

ben 11-11-2008 10:09 PM
Ok im taking orders for thumb screws. Aluminium and brass. PM me with what flavour you want and how many pairs you want. Just so i know how much material i need to buy :thumbsup:

Oh btw they are £4 a pair :thumbsup:

BJRC designs

rcluke 11-11-2008 10:28 PM
the thread is the same size as associated ones aint it ? :eh?:

Mike Hudson 11-11-2008 10:31 PM
yes they use the same grub screw!

ben 11-11-2008 10:34 PM
Quote:
Originally Posted by rcluke (Post 177831)
the thread is the same size as associated ones aint it ? :eh?:
They do indeed, BUT i can do them M3 to fit metric cars like the shpred:thumbsup:

josh_smaxx 12-11-2008 06:51 PM
1 Attachment(s)
Better quality picture :thumbsup:

ben 12-11-2008 06:53 PM
THEY WILL COME COUNTERSUNK BOTH SIDES!!!! lol. Didnt have a small enough counter sink at the time! :blush:

Thanks for the pic josh :thumbsup:

rcluke 12-11-2008 06:56 PM
Quote:
Originally Posted by josh_smaxx (Post 178057)
Better quality picture :thumbsup:
are they the sexy brass ones ?? :D


All times are GMT. The time now is 02:03 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com