oOple.com Forums - B-Max Build Tips

Page 2 of 2

Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)

- Yokomo (http://www.oople.com/forums/forumdisplay.php?f=21)

- - B-Max Build Tips (http://www.oople.com/forums/showthread.php?t=15677)

bigred5765

28-02-2009 12:56 PM

or have the screw threads facing inwards, behind the shock tower,

budgio

28-02-2009 05:57 PM

The Tamiya TRF Aeration shocks front and rear seem to fit ok.
Will test them out at Coventry on my next visit.

http://i158.photobucket.com/albums/t...o/DSC_0098.jpg
http://i158.photobucket.com/albums/t...o/DSC_0097.jpg

traffman

01-03-2009 01:03 PM

Quote:

Originally Posted by sosidge (Post 213352)

Use a file to take the rough edges off.

Yokomo do a pack of the screws as a spare, 4 screws complete with the nuts, BM-017M, £2.92.

How did you deal with the shoulder on the Losi screws? Did you drill the shock tower?

Nope , screws right in , the shoulder part is hidden .

MHeadling

01-03-2009 04:54 PM

I just put a plain non nyloc nut just in front of the bolt head behind the tower, then build it up as normal and you don't have any exposed thread to dig in, or you could cut the bolt down and file it smooth

sosidge

01-03-2009 05:11 PM

Quote:

Originally Posted by Mark Headling (Post 213653)

I just put a plain non nyloc nut just in front of the bolt head behind the tower, then build it up as normal and you don't have any exposed thread to dig in

Good solution.

All times are GMT. The time now is 08:55 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page