oOple.com Forums
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)
-   General Race Chat (http://www.oople.com/forums/forumdisplay.php?f=8)
-   -   Aluminium Parts (http://www.oople.com/forums/showthread.php?t=15480)

MikePimlott 31-10-2008 10:12 AM
X6 4 Deg rear hinge pin brace ?? just a thought.

Chris Doughty 31-10-2008 11:40 AM
just knock out a whole new car Danny...

mark christopher 31-10-2008 11:47 AM
danny you up for designing a light weight fly wheel for my ic car?

bbq 31-10-2008 12:02 PM
Danny!

2 things is on my wish list
Steel or brass front pivot block for the CR, the ones i have has bin around for to long =)
And i want a Brass plate that will fitt in to the bottom of the batery tray so i still
can run the sub-c weight with lipo packs. i think this will lower CG

Danny McGee 31-10-2008 12:49 PM
Quote:
Originally Posted by Lee (Post 173796)
Can you do me one of these

Attachment 4312
Piece of pi$$ ;)... Do you want it from solid or can it be a weldment!

As for the car Chris, yer im getting there slowly :)

Danny McGee 31-10-2008 12:50 PM
Quote:
Originally Posted by mark christopher (Post 173846)
danny you up for designing a light weight fly wheel for my ic car?
Yer thats no prob. PM and we'll talk about it more

Danny McGee 31-10-2008 12:56 PM
Quote:
Originally Posted by bbq (Post 173850)
Danny!

2 things is on my wish list
Steel or brass front pivot block for the CR, the ones i have has bin around for to long =)
And i want a Brass plate that will fitt in to the bottom of the batery tray so i still
can run the sub-c weight with lipo packs. i think this will lower CG
Do you mean a brass or steel front bulkhead?

and regarding the tray! do you want the rear pivot plate to be steel or just something that would slot in?

Danny McGee 31-10-2008 01:04 PM
Quote:
Originally Posted by bigred5765 (Post 173779)
i still have the solid works drawings i did, if you want them just ask, im sure you can perfect them mate,:)
Send me what you have Carl and ill knock something up and see if we can get it done :) what material did you want it from?

Fabs 31-10-2008 02:01 PM
can you make me some rear suspension holders for the rb for sunday? :thumbsup:

Danny McGee 31-10-2008 02:02 PM
Quote:
Originally Posted by Fabs (Post 173872)
can you make me some rear suspension holders for the rb for sunday? :thumbsup:
That would be a no mr F, im heading home now ive done my 40 hours this week :P

bigred5765 31-10-2008 02:17 PM
Quote:
Originally Posted by Danny McGee (Post 173860)
Send me what you have Carl and ill knock something up and see if we can get it done :) what material did you want it from?
its to big to post as a attachment pm ue your email

bbq 31-10-2008 02:27 PM
Quote:
Originally Posted by Danny McGee (Post 173858)
Do you mean a brass or steel front bulkhead?

and regarding the tray! do you want the rear pivot plate to be steel or just something that would slot in?
This is a pivot block?
http://images.amainhobbies.com/image...e/losa4129.jpg
What is heviest brass or steel?

what i hade in mind is a thin plate to put under the lipo pack to still have the
Weight of a 6 cell pack. if i put in a lipo today i will change the CG due to
the lipo almost is 120g lighter then 6 sub-c.

So a plate that is thin and fits in the bottom of the tray to get a beter CG with lipos

somthing like this but for the CR
http://www.redrc.net/2008/10/manutec...battery-plate/


I hope you understand =)

Fabs 31-10-2008 02:55 PM
Quote:
Originally Posted by Danny McGee (Post 173855)
Piece of pi$$ ;)... Do you want it from solid or can it be a weldment!

As for the car Chris, yer im getting there slowly :)
You lazy twit i'm going to work tomorrow to make them anyway :drool:

Danny McGee 31-10-2008 03:33 PM
Im pretty sure that brass is heavier. Thats what i run on my 2wd and it seems to help me.

I've actually got that modeled up already so that will be handy :) (somthing i dod for uni)

Will look into it over the weekend

Danny McGee 31-10-2008 03:33 PM
Crazy fool...
:thumbsup:

b4rs 31-10-2008 03:43 PM
hi danny, what do u make em on? and how do u anodize them? could you make front and rear purple bulheads for the durga?

jimmy 31-10-2008 03:48 PM
leave your durga alone, it's already good enough. :yawn:

mark christopher 31-10-2008 03:57 PM
Quote:
Originally Posted by bbq (Post 173882)
This is a pivot block?
http://images.amainhobbies.com/image...e/losa4129.jpg
What is heviest brass or steel?

what i hade in mind is a thin plate to put under the lipo pack to still have the
Weight of a 6 cell pack. if i put in a lipo today i will change the CG due to
the lipo almost is 120g lighter then 6 sub-c.

So a plate that is thin and fits in the bottom of the tray to get a beter CG with lipos

somthing like this but for the CR
http://www.redrc.net/2008/10/manutec...battery-plate/


I hope you understand =)
use a strip off roofers lead cut to stick pack size

b4rs 31-10-2008 04:00 PM
lol jimmy, for you £250? yes. teery tibbs talk to me.

Danny McGee 31-10-2008 04:43 PM
Quote:
Originally Posted by b4rs (Post 173905)
hi danny, what do u make em on? and how do u anodize them? could you make front and rear purple bulheads for the durga?
They'de be made on a 6 axis milling machine that we have at work, and id also be using the small anodizer we have too. We only use it for our prototype bits that we have to make so its not being used all the time.


All times are GMT. The time now is 05:01 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com