|
Team Associated
(http://www.oople.com/forums/forumdisplay.php?f=24)
Quote:
|
He said it was a new charger... I'd bet he did something wrong.
|
Small modification I've done to help with meshing!
Much easier using this as per the b44.1! http://img.photobucket.com/albums/v1...DD543196FA.jpg |
Quote:
Good work! But needs a black wing imo How about a scotch brighted wing? Easy to do and lasts. When I used white or black wings, I carried an aerosol always and just sneaked off to blow over them if paint flaked. :lol: |
Lmao!
I've been using black wings for 2 years I hate them! Reasons being:- The paint scratches too easy You can't see where to ream the holes! They look cheap after one race! Plus I have to wait for them to he sprayed of mr Parker! But I do agree!!!! |
Quote:
|
Quote:
White all day! |
Looking pimp Gaz :) i'll have a butchers if you're at chadderton sunday fella
|
mod
whats the mod you've done Gaz cant see very well on work computer
Tell us details!! |
Top of spur gear cover neatly removed, so can thumb the spur to check mesh.
Quote:
Neat job Gaz, but knowing you - watch out for that flat spot on the spur gear ha ha ha. :lol: :p |
Still waiting for mine from MB Models. This is my first 1/10 racing buggy. For those that already have them, how ate you finding them and how are they compared to the B44.1. Can't wait to get started on building this. Hope i have made a good choice.
What's spares would you advise on getting tho. So far heard that FT ball cups are brittle and need replacing. |
Quote:
Easy build just take your time if your new to it The screws that go into the alloy black front brace may not go in well take your time they won't need to come out again! Spares wise they don't break unless you can't drive! Or unless someone else can't drive! Make sure you have a front roll bar Shock bottoms (I've done a few of these, the bits that screw onto shock shafts) Front tower Rear tower Front arms Rear arms (possibly) That's about it obviously this list will get bigger if your a club racer. Any help give me a shout il help |
Quote:
The spares that you mentioned, are they the ones that currently fit on the B44.1 or will I need to wait for the B44.2 spares. Also, does the kit come with wheels but no tyres. The reason I ask is that the club I am joining run Schumacher mini pins or Balistas and I am not sure if the wheels are a standard size or do I need to buy a set size for the B44.2. Sorry if my questions are typically new boy stuff. I'm sure I will get the hang of all thos once I'm up and running but wanted to get the stuff all ready to go asap. |
Quote:
Mini pins will fit fine hard inserts if on carpet in front and slightly softer in rear ! You will have to wait ideally for b44.2 towers better Make sure you buy hex wheels in future in rear Gaz |
B44.2
Quote:
|
Quote:
|
Hey guys, has anyone got a setup for a b44.2 (or.1) seeing so new, for high traction carpet?
Cheers! Ill post pics of the new .2 soon! :) |
Quote:
Go onto petite setup site under b44.1 My southport dry setup should work, you may want 2 spacers under each front ball stud try both. You can also try Paul Bradby petite race 2011 Both very similar With new big bores I'd run same oil 45/35 but run stiffer springs than kit possibly. Yellow/red front maybe and about 2.20 rear springs can't remember colour. All depends on track and jumps etc. You could run black or green rears also Slightly softer Any questions give me a shout. |
Cheers! Plenty on Petit, forgot about that!
I did want to mention I had the same prob as you on the front hingepin brace, was not tapped correctly, ran a tiny tap through and all good. I also had to clear the thread out of the centre motor mount for the slipper cover, wasnt threaded correctly. Car went together great apart from that, no drama! |
| All times are GMT. The time now is 07:16 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com