oOple.com Forums
Page 19 of 32 « First 91718 19 202129 Last »
Show 40 post(s) from this thread on one page

oOple.com Forums (http://www.oople.com/forums/index.php)
-   Team Losi Racing (http://www.oople.com/forums/forumdisplay.php?f=17)
-   -   Show us your TLR 22 (Twenty Two) (http://www.oople.com/forums/showthread.php?t=65713)

tisher 12-05-2011 04:51 PM
Quote:
Originally Posted by coleman758 (Post 501044)
I do like those wheels!

But... The front end on the 22 can be quite twitchy. and i has loads of grip to start with. I think you may struggle with the rear end with 4wd fronts.

Minty had 4wd fronts on at ribble valley friday, and he didn't rate it. went back on slims.

there is no way it will kick the back out with these tyres;)

Ross 12-05-2011 08:12 PM
Had a little swop around with the electric, and had a shell done by Mr Miller :wub,thanks Jon, oohh and the other two are very nice :wub


http://www.rosswhitelock-photography.../IMG9669-M.jpg
http://www.rosswhitelock-photography.../IMG9659-M.jpg
http://www.rosswhitelock-photography.../IMG9664-M.jpg
http://www.rosswhitelock-photography.../IMG9682-M.jpg
http://www.rosswhitelock-photography.../IMG9683-M.jpg
http://www.rosswhitelock-photography.../IMG9665-M.jpg
http://www.rosswhitelock-photography.../IMG9670-M.jpg
http://www.rosswhitelock-photography.../IMG9676-M.jpg
http://www.rosswhitelock-photography.../IMG9671-M.jpg

Nitrius 12-05-2011 08:17 PM
@Ross Interesting bracket you've made for your ESC there, just a metal plate you've put between the battery and the mid motor brace? And some screws or something from the holes in the mid motor braces into the metal plate?

Ross 12-05-2011 08:27 PM
Quote:
Originally Posted by Nitrius (Post 501217)
@Ross Interesting bracket you've made for your ESC there, just a metal plate you've put between the battery and the mid motor brace? And some screws or something from the holes in the mid motor braces into the metal plate?
Yeap thats it, 25mm up x 40 out for the speedo to sit on, it the bolts through the gaps in the motor mount. You'll need to counter sink the screws, or they hit on the LiPo :lol:

Nitrius 12-05-2011 09:13 PM
Quote:
Originally Posted by Ross (Post 501229)
Yeap thats it, 25mm up x 40 out for the speedo to sit on, it the bolts through the gaps in the motor mount. You'll need to counter sink the screws, or they hit on the LiPo :lol:
Could you take a picture of the screws and such behind the lipos for me to take a closer look? Either post it here, or send me a PM? Would really appreciate it =)

Ross 12-05-2011 09:42 PM
Quote:
Originally Posted by Nitrius (Post 501249)
Could you take a picture of the screws and such behind the lipos for me to take a closer look? Either post it here, or send me a PM? Would really appreciate it =)
Yeah no worries, I will try to get it done tomorrow

Wacker 2 12-05-2011 10:34 PM
Quote:
Originally Posted by Ross (Post 501213)
Very nice :thumbsup:

Razer 13-05-2011 09:21 AM
Here's my cars! No bodies to show off yet though...
http://farm3.static.flickr.com/2695/...b0112acb_b.jpg
http://farm4.static.flickr.com/3070/...f3829319_b.jpg

http://farm3.static.flickr.com/2517/...d148d14e_b.jpg

coleman758 13-05-2011 10:08 AM
Quote:
Originally Posted by tisher (Post 501148)
there is no way it will kick the back out with these tyres;)
It will be interesting to see!
Gutted i wont be at ribble valley friday :(

Il see you next week and have a nosey!

spindles69 15-05-2011 10:28 AM
Hello Tisher,
What did you use for the axle's,because i have a load of kyosho rims with good tyres that i had for my rb5,would save buying another load of tyres and rims,
Cheers Mick.

fastinfastout 15-05-2011 01:30 PM
Quote:
Originally Posted by tisher (Post 501147)
yep its modifed to fit kyosho hexs and to do away with the awfull screws in the front wheels
would you be able to tell me exactly which parts are required, and what rb5 wheels are they? Never seen spoke wheels for kyosho.

tisher 15-05-2011 04:57 PM
right guys for all that want to know about the kyosho set up. the front spindles are kyosho zx mk1 cvds cut of behind the joint and the rear are kyosho drilled out to 5mm with spacers on the outside the spoke wheels are 3 racing wheels for kyosho zx . kyosho lazer fs front wheels give you exact offset to the losi where as the standard lazer are slightly wider hope this helps save you a few quid

spindles69 15-05-2011 07:09 PM
Quote:
Originally Posted by tisher (Post 502247)
right guys for all that want to know about the kyosho set up. the front spindles are kyosho zx mk1 cvds cut of behind the joint and the rear are kyosho drilled out to 5mm with spacers on the outside the spoke wheels are 3 racing wheels for kyosho zx . kyosho lazer fs front wheels give you exact offset to the losi where as the standard lazer are slightly wider hope this helps save you a few quid
Cheers for the info Tisher,
The fronts i understand but the rears can you explain in simpletons terms please,its just that when i put the kyosho wheels on the 22 (rear) theres about 10mm of axle before you get some thread,so how did you space it out, the only way i could see to do it was to put three hex's together somehow?
Cheers Mick.

tisher 15-05-2011 07:44 PM
Quote:
Originally Posted by spindles69 (Post 502316)
Cheers for the info Tisher,
The fronts i understand but the rears can you explain in simpletons terms please,its just that when i put the kyosho wheels on the 22 (rear) theres about 10mm of axle before you get some thread,so how did you space it out, the only way i could see to do it was to put three hex's together somehow?
Cheers Mick.
rears budy just drill the wheels out to 5mm so they fit on the spindles then just put them straight on the losi hex then just use a spacer on the outside of the wheel before you put the nut on

Reo 15-05-2011 07:45 PM
3 Attachment(s)
here is mine, body paint by Razer..

Razer 15-05-2011 08:04 PM
Quote:
Originally Posted by Reo (Post 502341)
here is mine, body paint by Razer..
Ssshhhhhh! Don't tell everyone I did that!!:-P Looks better with a car underneath and some stickers on top, but I really regret I didn't put a yellow frame around the windows. Weeeeeell, for a five minute paintjob, I think we're both happy enough:P

spindles69 16-05-2011 07:14 PM
Quote:
Originally Posted by tisher (Post 502339)
rears budy just drill the wheels out to 5mm so they fit on the spindles then just put them straight on the losi hex then just use a spacer on the outside of the wheel before you put the nut on
Cheers for that tisher,
Sounds simple now you've explained (doh):confused:

Razer 17-05-2011 10:20 PM
Ready for the Worlds warmup in Finland this weekend! :)

http://farm3.static.flickr.com/2737/...83a14f3c_z.jpg

Wacker1 18-05-2011 11:59 PM
Hi all,

As I've had my Losi 22 practically since the day it was Released, I thought that it was about time that I Shown some Pics of mine!!:D

http://i277.photobucket.com/albums/k...photos/001.jpg
http://i277.photobucket.com/albums/k...photos/004.jpg
http://i277.photobucket.com/albums/k...photos/007.jpg
http://i277.photobucket.com/albums/k...photos/008.jpg
http://i277.photobucket.com/albums/k...photos/003.jpg
http://i277.photobucket.com/albums/k...photos/002.jpg
http://i277.photobucket.com/albums/k...photos/005.jpg

stegger 21-05-2011 08:40 PM
My 22

http://i12.photobucket.com/albums/a2...cture005-1.jpg

http://i12.photobucket.com/albums/a2...Picture008.jpg

http://i12.photobucket.com/albums/a2...Picture006.jpg

http://i12.photobucket.com/albums/a2...Picture007.jpg


All times are GMT. The time now is 12:36 AM.
Page 19 of 32 « First 91718 19 202129 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
oOple.com