here's mine.

only real hassle on the build was fitting al electronics inside.
there is enough room for it, but in my eyes its only the body that makes it so hard to cram everything in:thumbdown:

eventually had to ditch the velcro (wich i liked) and made my own battery holder of some thick aluminium, so i could fit the esc on it as there was NO way that esc would fit on the place losi had intended!

was more interested in running this beauty so no fancy paintjob here.

specs:
- speed passion gt2.0 pro esc
- speed passion V3 7.5 turns
- 60c 5400mAh lipo saddle packs
- savox low profile 9kg servo

http://img.photobucket.com/albums/v335/Ronny191/tlr.jpg

http://img.photobucket.com/albums/v3...1/DSCF0969.jpg

http://img.photobucket.com/albums/v3...1/DSCF0968.jpg

http://img.photobucket.com/albums/v3...1/DSCF0971.jpg

currently running on a 1/6 (yes 1/6) astro track with some major bumps for a 1/0 to handle.
followed the stock UK setup and its done well for me. drilling out the pistons to 6 hole was a major inprovement!

I have found that the car does not like bumps it just seems to bounce around,:mad:

I ran the car last week at batley which is a astro and grass track but very bumpy and slippery,

Hence making a radical change, I have just got the shocks to sort out.

And fingers crossed it works:p

hmm that could be, but i find it hard to believe,

im running with a couple of friends at the local racetrack and they are running:
- 2 asso B4's
- durango dex410
- ansmann x2c
- asso b4 with the X6 conversion
- asso T4

of all those no doubt the T4 handles the bumps the best, as for the buggy's mine seems to be the smoothest one. infact, it also looks like the losi is the more forgiving car to drive

im no expert on this at all, but the other one's have definatly some strong points in other areas on track.

my losi is also the light one in the pack, so i would assume it should need some weight (currently have none in the car) to make it a bit more planted in the corners, but im affraid this would make the car more bouncy over the bumps????

change to piston 54 and use same oil 27.5 maby a softer spring to at rear. the rear is not working to good with orig setup. maby unturn the damper cup 0.5 to 1 turn out (oring cup) to free up damper rod movement.

We have tried a number of things,

Oils and springs, will be changing to the 54 pistons when I get around to it.

I must admit I very lucky to have some very good help within stu wood along sibe me.

Don't get me wrong the cars good but just not as good as it can be. Play time is always fun:woot::thumbsup:

Big Frogger and little frogger's cars:

http://www.carvencollective.co.uk/pics/Losi22_1.jpghttp://www.carvencollective.com/pics/Losi22_1.jpg

http://www.carvencollective.com/pics/Losi22_2.jpg

http://www.carvencollective.com/pics/Losi22_3.jpg

http://www.carvencollective.com/pics/Losi22_4.jpg






http://carvencollective.co.uk/pics/Losi22_1.jpg

.
 

Heres mine thought i would have a play/add to my collection
http://img804.imageshack.us/img804/5120/losi22005.jpg

http://img706.imageshack.us/img706/8371/losi22004.jpg
By http://img34.imageshack.us/img34/3868/losi22006.jpg
http://img713.imageshack.us/img713/3884/losi22001.jpg

@ Frogger

neat, like the QD 4mm plug pullers, there :cool:

What have you used for the battery strap post, a TC bodyshell post?

Yup, it's a Tamiya body post, I'll throw a couple in with your lipo. I used a flat bit of carbon for the rest. Very quick and easy. :thumbsup:

sorted :D

Finally received it this morning... looks even better up close :woot:

All mounted up:

http://i593.photobucket.com/albums/t...Picture001.jpg

http://i593.photobucket.com/albums/t...Picture002.jpg

http://i593.photobucket.com/albums/t...Picture003.jpg

http://i593.photobucket.com/albums/t...Picture005.jpg

:thumbsup: Jon :thumbsup:

mind you dont burn ya fingers on the wing,looks good m8:thumbsup:

My TLR 22
 

Thought it was about time I put a few pictures of my TLR 22 on here, ran it 3 times & love it!

http://i467.photobucket.com/albums/r...g?t=1304954711

http://i467.photobucket.com/albums/r...g?t=1304954711

http://i467.photobucket.com/albums/r...g?t=1304955393

http://i467.photobucket.com/albums/r...g?t=1304954901

http://i467.photobucket.com/albums/r...g?t=1304955059

http://i467.photobucket.com/albums/r...os20/004-1.jpg

Not bad

but try using the bottom link from your photbucket

Heres a few of mine lecky was hard work
http://i908.photobucket.com/albums/a...1998/006-8.jpg
http://i908.photobucket.com/albums/a...1998/007-8.jpg
http://i908.photobucket.com/albums/a...1998/009-7.jpg

Hi Tisher, What are these wheels ?

3 racing for kyosho;)

where did you get the wheels? did you modify the hex at all? and did you just put a set screw with a nut or what?

I do like those wheels!

But... The front end on the 22 can be quite twitchy. and i has loads of grip to start with. I think you may struggle with the rear end with 4wd fronts.

Minty had 4wd fronts on at ribble valley friday, and he didn't rate it. went back on slims.

yep its modifed to fit kyosho hexs and to do away with the awfull screws in the front wheels