Any news on a part listing and prices yet??

A

On DMS and JE Spares

Come on Ash pay attention!! :p

We have had them online now for over a month and just two days after the car was officially announced.... ;)

I looked though the new stuff section and there where not in there so assumed you hadnt listed them yet.

A

Since they are not "in" yet we have not listed them as "new", technically they should all be in our "preview" section, but we did not want to flood that section with hundreds of spares specific to just one car. Rest assured as soon as we start to recieve the first few into stock we will make a song and dance about it on here and on our website, we have LOTS of spares pre-ordered..... ;)

Team drivers.

Are the turnbuckles titanium in the kit as standard?
If not what sizes do people need?
Thanks

Sly,
According to the release info, they are 3.5mm heavy duty turnbuckles. Can't say for certain but I doubt if they will be Ti. Certainly our prototypes seem to be steel (although finished in a fetching stealth black look).

If you want Ti, I'm sure you'll be able to get some Lunsford 3.5mm ones to work for you.

HTH

Any chance you can give us the lenghts of them as well fella ?

Oohhhh, I was hoping no-one would ask me that. :cry:

I don't have my car here with me but the parts list simply states 45mm, 50mm and 55mm lengths. Not sure if that is overall length or the length between the threads though.
I'll try to measure the length between the threads later and confirm.

Sorry.

Hey Andy,
Lunsford sell by end-to-end length, so ideally that is the measurement people will be asking for. Worth knowing now ofcause - so Horizon can get extra on the shelf an avoid a turnbuckle famine ;)

Looking at it, it looks like you would want 2x1"1/2 & 4x1"7/8

I thought this car was metric...??:thumbsup::confused::woot:

Had a chance to measure the stock ones now (albeit without taking the ball ends off). It would appear that the quoted lengths are, as with Lunsford, end-to-end values - unless you like your toe and camber angles to be extremely whacky:woot:

Pretty close there Brian - thank you:-)

I reckon 1 pair of the L11067 1"3/4 turnbuckles will do for the 45mm, 1 pair of L11069 2" for the 50mm pair and 1 pair of L11070 2"1/8 will work for the 55mm pair.

Cheers

Cheers everyone.:thumbsup:

http://www.horizonhobby.com/Products...prodDetailTabs

4/5th down the parts list is the turnbuckles and there lengths, Gnarly old dog your guesses are correct and i`d guess by the price of the parts that they will be steel as standard.

so the the search for ti. starts.


Also the due date is different to the one we have/been posted on this thread somewhere.

http://www.horizonhobby.com/Products...ickAccessories

is it true that the date has gone to late march now,why is this

Any team drivers out to fill the gap with a inside reason on the release date being pushed back?

Anyone?


Are the spares going to make it over... So at least i can get a shell painted up?

i asked about that and they said it will be avalible when the car come in,:thumbdown:...........

Don't know why people keep asking when this is out and that is out . The 22 will be out when it's good and ready. I'm sure if the car came with either under performing parts or parts were missing everyone would be saying Losi or bad for letting this happen blah blah blah. Come on guy's show a little patience. I'm sure it's going to be worth the wait :thumbsup: