Thats an A&L

mvh Isobarik

Unsure what that is, possibly a mid lwb. I use a parma tomcat or lazer zxs shell which yoy can buy from kamtec (website below). The parma doesnt come with undertray yet.

actually that is like US style body，A&L，thanks
I also got the yellow plastic wing original for ZXRR
http://img.rcfans.com/album/201111/3...9wbz7xk7k6.jpg
http://img.rcfans.com/album/201111/3...2q2ougkbue.jpg

You can still buy these type of wings from a couple of companies including Kyosho.

Just wanted to show Ruffy on rc10talks, his car that he used at basildon

http://img714.imageshack.us/img714/1854/img5119.jpg

Looking good and still in his belongings.

if you want more pics and reading here are an link

http://www.rc10talk.com/viewtopic.ph...14434&start=15

mvh Isobarik

Looks almost as good as mine. Shows quality as it hasnt aged at all.

i saw a post a few pages back where a guy had shocks called equilizers and someone commented on how good they were,

are these the same shocks and if so which are the best to buy, i would want fronts and rears, but dont know what sizes to get, ie: are they all the same size.....


http://www.ebay.co.uk/itm/Kyosho-W50...f#ht_500wt_969

http://www.ebay.co.uk/itm/Kyosho-W50...2#ht_500wt_969

Those are the same shocks as what I got. As a Kyosho fan boy, I like them, it does the job. but Welshy likes the Losi (not sure) ones that was engineered for the Zx-S (not sure about the whole story).

The only downside I have is with the coilover adjustment. It uses telfon tapes (ones that you use to seal shower heads) instead of the modern o-rings in the adjusting nut. Its difficult to set the correct thickness of the teflon tape so that it wouldn't shred when you adjust it (more you loop around the shock body, the more difficult to turn; the less you loop around the shock body, the more difficult for it to stay in place).

I would advise you to fill all your oil first then install the tape. It is because if the telfon tape comes in contact with the shock oil, it will soften and prone to breakage.

The Medium length is for the front with the use of higher shock mounting holes, the Long length is for the rear, but the shock shaft is a bit long. You need to play with the adjuster and shock in order to set the rear arms to level with the chassis.

That's a very nice find as I have paid more than 19 lbs a set.

Iso, has pang2000's middle upper deck mount w/ belt tensioner reach your place yet?

I want to see it!

Mate, you know how good a craftsman he is, the only down side is he is a one man band and has to stay afloat so has had to put back things like this (dont forget he has to make the mold which takes time) so he can deal with the cash orders first, so will take him some time to sort. I am also awaiting some items which he has had for longer but I have asked about your shells and he will try to start on these early next year. I know its not what you wanted to hear but where else can these be sent to get a great copy made where it will with stand punishment.

No it has NOT !!!! due to it took almost a month just to send the piece :thumbdown:

I askid him where the piece where and then i got a note from ebay that he had sended it and that was on the 28 of november and i bought/paid it on the 26 of september and no piece yet.

mvh Isobarik

Btw has anyone seen the slot on the motorplate on ruffys car ??

i would say belt tensioner....

mvh Isobarik

Calm down... hahaha I think they thought you wanted it for a Christmas present.

No... which one is Ruffy's car? Belt tension from the motorplate? that's kinda far.

http://img714.imageshack.us/img714/1854/img5119.jpg

this is ruffys car ...look at the slot on the motorplate.

mvh Isobarik

oh yea.. it does have a slot there. I missed it. I would be even better if the slot is perpendicular to the belt. I hate half-@ssed designs like that, but it is a nice alternative to place a belt tensioner. I wonder if the belt will get heated from all the heat that the motor plate collects, but it might be another form of heat dissipation (cooling the motor with the front belt). :lol:

I think it was for a alloy mount alongside the motor plate rather than a belt tensioner. Most people who had one tended to place it in the middle of the top deck rather than where I have placed mine. Still would be interesting to hear what it was used for as I cant remember half the stuff that was out that time.

i ordered and paid for a cartain car part from waldorf-rc on ebay on 8th oct 350495120821 and i still havnt had that yet either, after i purchased it he said he had none in stock and wouldnt have until end of october, then end of nov and now end of december, i purchased it in october because in nov the value of items you could purchase before vat and po charges went down from £18 to £15...

if he does eventualy send end of dec it will be over £15 and i may get hit with vat and a £9 post office handling fee,

not happy with waldorf-rc :thumbdown:

You have the right to cancel and if he hasnt charged then great.

just an update all,been mulling it over and im going to rebuild car 1 which's is the zxr mk2(link from previous posts http://photobucket.com/zx-r1) wheres a good place to start and is there anything worth changing straight away.also what servo mounts/holders are you guys using?

also the grove in the blue motor plate above....could it be for xtra heat sinks(similar to what welshy mentioned) like the lazer posted before it on the other page?
http://knaeuel.stw-bonn.de/rc/ebay-lazer01.jpeg