Thanks!
For some reason, I cannot reply to your PM. Not sure why, so I'll reply here.
The excess ant is wrapped in heatshrink, and runs between the fan/esc to the kit mount, which I cut off the weak kit tray. The ant tube is bent straight forward above the servo horn, and ends behind the diff. I'm using 12g wire. The fan is a Novak 27mm, and has a flat area on one side. Ideal for servo tape. I used servo tape on the esc switch, too. My PT was being used by my oldest Son when I took the pics, but is normally mounted on the chassis, between the servo and front diff. I mounted it similar to
Dave C's PT mount thread: http://www.oople.com/forums/showthread.php?t=35051
The TrakPower 4650mah/35c's work very well. The actual capacity is more like 4800mah (based on my charger data), and the 35c rating gives them more than enough power. During hard driving, my run times have been approx. 18-25 minutes with the kit spur/16t pinion. Best packs I've ever used!
Thanks again,
Tony
